Ice Container and Auger Assembly

Hi Carolyn, Thank you for the question. If all the parts inside the ice bucket are intact and not damaged, I would suggest replacing the Auger Motor, Part Number: PS10057235. Hope this helps!

Hi Phyllis, Thank you for your question. In order to get the ice crusher blade, you will need to replace the ice container and auger assembly. The part number listed under your model number for the ice bucket and auger assembly is PS1991430. I hope this helps. Thank you and have a great day!

Hello Rickey, thank you for your question. If there is nothing broken, and the blade just has to be reattached, you shouldn't need any parts. This video will show you how to replace/reattach the drive blade in your appliance. I hope this helps! https://www.partselect.com/PS1526405-Frigidaire-241684501-Drive-Blade.htm?SourceCode=1&SearchTerm=FFHS2322MW5&ModelNum=FFHS2322MW5&ModelID=6910018.

Hello Darrel, thank you for your question. If you are able to switch between crushed and cubed on the display panel on the door, we would recommend testing the Crushed/Cubed Ice Solenoid Assembly - 120V 60Hz PartSelect Number: PS8691994 and the Ice Solenoid PartSelect Number: PS8691995 to see if either of these parts are faulty. These parts facilitate the switch between the two options. If those parts are working, the next step would be to test the micro switches that are up inside the dispenser. If those parts are tested and are function, the issue could be the control board in the dispenser. I hope this helps!

Hi Phyllis, Thank you for your question. Here is a link to one of our videos from YouTube with a refrigerator with one lever that you may reference, https://www.youtube.com/watch?v=xIICeXtGPWs. The refrigerator in the video may not show exactly like the one you have, but it will give you a general idea on where the part is located even though the part being installed is a recess door spring. I hope this helps. Thank you and have a great day!

Hello Rosie, Thanks for your question. Yes, this container and auger assembly is all of the parts for your model assembled into one unit and it is compatible. I hope this helps.

Hi Hal, thank you for your question. There are two parts that you should check for this issue. The first part to test would be your water inlet valve. The valve has two solenoids that control either the dispenser or the ice maker. Even if your dispenser is working the ice maker solenoid may not be and vise versa. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is testing correctly then you should look into your ice maker being the issue. I hope that helps. Good luck with your repair.

Hi Austin, Thank you for your question. The part number listed under your model number for the blade is PS12728807. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Hello Janice, thank you for your question. Yes, the container assembly PartSelect Number: PS1991430 does fit the model ffhs2611lbra unit. This is a compatible replacement part. I hope this helps!

Hi Guy, Thank you for your question. If there is water leaking from the ice maker, the water inlet valve may be be malfunctioning and you will need to test it with a multimeter to verify if it is working correctly. I hope this helps. Thank you and have a great day!