Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Connie
November 25, 2019
I need the sensor for the door locking mechanism
For model number WA45H7000AP
Hi Connie, this is a part of switch door lock PS12072637. Thank you for your question and good luck with your repair!
The water does not shut off no matter what stage the machine is cyclying
For model number WA400PJHDWR
Hello David, thank you for your question. We would recommend replacing the water valve PartSelect Number PS4220862 and the pressure sensor, which is PartSelect Number PS4217081. Please enter the part number into the site for current price and availability. Good luck with your repair!
Was this helpful?
Thank you for voting!
Willie
July 7, 2021
Lights come on but water doesn't enter tub or drain and no matter what you select for options (normal, rinse & spin, etc.) nothing happens. Was working fine, but when i went to check on the load, all the lights were flashing. The tub was half full with water. Hit pause and all the lights stopped flashing. Selected rinse & spin, but nothing happened. Selected several other choices and nothing happened. Door lock clicks. Any suggestions? We are on small social security and can't afford a repairman.
For model number WA40j3000aw/a2
Hi Willie,
Thank you for your question. If your washer will not fill with water, there are some parts that you will need to check to see which one is causing the issue. You will need to check water inlet valve, the door lock, the water level pressure switch, and the user control and display board. We hope this helps! Good luck with the repair!
I set washer on small water level wash it will fill but after a couple of minutes it will go to large load and start adding more water .what part do I need
For model number wa40j3000aw/aa-13
Hello Alan, thank you for your question. We have researched the model you have provided, and we would suggest the Water Level Pressure Switch, part number PS4217081. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Noah
March 5, 2023
The hot water valve won’t open. It’s not a problem with the solenoid; it will open when I plug the cold inlet wire onto it, and it also checks out when testing with my multimeter. No problem with the signal wire back to the plug on the main board. It’s just not getting a signal to open.
For model number WA52M7750AW/A4
Hi Noah, thank you for contacting us. We would recommend checking the water temperature thermistor, part number PS4214274. A partially clogged water inlet valve, part number PS4220861, or a faulty pressure sensor, part number PS8764044, might be the cause of the issue. There is a possibility that the hot water side of the inlet valve is clogged. Please make sure it is free of any debris or particles. We hope this helps, good luck with this repair!