417830-1-M-Frigidaire-131446200 -Timer Knob Assembly
Part Location Diagram of 131446200 Frigidaire Timer Knob Assembly
See part 30 in the diagram
417830-1-S-Frigidaire-131446200 -Timer Knob Assembly 360 view
( Grid squares measure 1x1 inch )
417830-1-S-Frigidaire-131446200 -Timer Knob Assembly 417830-2-S-Frigidaire-131446200 -Timer Knob Assembly 417830-3-S-Frigidaire-131446200 -Timer Knob Assembly 417830-1-S-Frigidaire-131446200 -Timer Knob Assembly 360 view
Part Location Diagram of 131446200 Frigidaire Timer Knob Assembly
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Timer Knob Assembly 131446200

 Fits your FWT445GES2!
★★★★★
★★★★★
1 Review

Rated by 17 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 128.63
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your FWT445GES2!
PartSelect Number PS417830
Manufacturer Part Number 131446200
Manufactured by Frigidaire
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Check if this fits your product and find model diagrams

Need help finding your model number?
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Washer.
This part works with the following products:
Frigidaire, Gibson, Kenmore.
Part# 131446200 replaces these:
AP2106893, 407410, 131264300
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

2 questions answered by our experts.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stevie
December 27, 2017
I am fixing to replace the timer knob on my friends front loader.The white part of the knob has broken off and will come off in their hand and the black part that was attached to the white part is still inside the timer knob hole attached to the timer shaft. They can still use the washer by pulling out on the black part with needle nose pliers,then sticking the white knob back into the hole and ,then turning the timer where it needs to be for the cycle to start,then it runs through the entire cycle fine.I have read where it says just turn the black part to the left(counterclockwise) to unscrew it and then just put the new knob in and screw it on to the right(clockwise) until snug,but when i look in there now(before i start this little 2-3 minute job),there seems to be a nut maybe that holds the black part onto the timer shaft? Does this make sense? Am i looking at this wrong? The nut looking thing seems to be larger than the hole in the black part with the little fingers on it? Is this a nut,or is it part of the shaft(all one piece)?
For model number FWT445GES1
PartSelect logo
Hi Stevie, Thank you for contacting us. It sounds like you have a good understanding of how this part is installed. We also have a customer who wrote in with how this part is installed: "1 - Removed the remaining part of the old knob assembly by grabbing the thin rim with needlenose pliers and twisting to rotate counterclockwise. 2 - Placed new assembly in place and hand tightened in clockwise direction. The selector only moves clockwise, so it isn't necessary to use tools to tighten the assembly.". The part is not a nut really, it is just screwed on to the shaft of your timer. All you have to do is unscrew it to remove it. Good luck with your repair.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Andrey
January 4, 2018
Where can I find the video or detailed instructions how to install Partselect number ps417830?
PartSelect logo
Hi Andrey, Thank you for the question. We do not offer a video as of yet for this knob. Here is what a previous customer posted on how they installed the part. "1 - Removed the remaining part of the old knob assembly by grabbing the thin rim with needle nose pliers and twisting to rotate counterclockwise. 2 - Placed new assembly in place and hand tightened in clockwise direction. The selector only moves clockwise, so it isn't necessary to use tools to tighten the assembly.". The part is not a nut really, it is just screwed on to the shaft of your timer. All you have to do is unscrew it to remove it. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 5.0 / 5.0, 17 reviews. What's this?
  • 1
  • 2
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken timer knob
Unscrewed the broken knob, ands screwed the replacement back on by hand. Couldn't have been easier. Thanks guys.
  • Andrew from Idaho City, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The knob stayed in my hand when I pulled it to start the washer.
First the part arrived withing 2 days! I used pliers to pull the old knob assembly (minus the knob which had broken off) left in there. I inserted the new one and turned it and voila! Less than 3 minutes. My washer can be used again. And, as I am an old lady with arthritic fingers and could do this so fast, anyone can do it.
  • Evelyne from Carlsbad, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer setting timer switch knob broke
simply grasped the remaining segment of the switch with the pilers and turned it counter clockwise and once removed threaded the new one on.
  • Robert from pipe Creek, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob came off in my wife's hand when starting a load
It took a few minutes on inspection to figure out I needed some bent-nose pliers to grip the inner black plastic knob and unscrew it from the threaded spindle.

Once that was done, it was s simple matter of spinning on the new on.

I must say, the brittle litle plastic fingers that hold this knob together have to be the most poorly designed piece of crap I've ever seen. Who ever designed and then approved this design should be sent flogged. It's a lousy as a PEZ dispenser.
  • John from Seattle, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
10 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer Knob Broke Off
I didn't know how to get the part still in the washer slot from which the timer knob broke off. Thanks to other people documenting on how to do it, I was able to use pliers to unscrew the anchor part and easily replace it following their directions. Took less than 2 minutes.
  • Lucian from Windsor, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer knob popped out of the assembly, spring and all.
Removed the remaining assembly and popped in the new one. Took less than a minute.
  • Bonnie from Vero Beach, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old knob assembly broken.
1 - Removed the remaining part of the old knob assembly by grabbing the thin rim with needlenose pliers and twisting to rotate counterclockwise.

2 - Placed new assembly in place and hand tightened in clockwise direction. The selector only moves clockwise, so it isn't necessary to use tools to tighten the assembly.
  • John from Bainbridge Island, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
16 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer Knob was broken
Used pliers to grab the bolt and turned left to remove piece. Screwed on new piece to the right without pliers - THAT SIMPLE!!!!
I
Other Parts Used:
Selector Knob
  • Julio from New York, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer knob on washer was broken.
Unscrewed old knob with pliers and and screwed on new knob. Repair was very easy.
  • Bernard from Spencerville, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer assembly broken, could not turn on washer
No tools necessary. Simply turn old knob to the left or counter clockwise and it will disengage. Slip on the new part and turn to right or clockwise until it is tight. 2 minute project.
  • Thomas from Alamo, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Michael H - December 4, 2018
  Verified Purchase
Unscrew old, screw in new, budda bing!
Counter clockwise to remove broken old one, clockwise to install new knob assembly. Works fine. Wife things I am a genius, well maybe not quite.
  • 1
You May Also Need?
Timer Dial - White
$59.23
$59.23
  Special Order
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS417830
Manufacturer Part Number: 131446200
Brand
Model Number
Description
Frigidaire
38712
Washer - WASHER
Kenmore
9703871220
Washer
Frigidaire
FWT445GC
Washer - WASHER
Frigidaire
FWT445GCS0
Washer - Residential
Frigidaire
FWT445GE
Washer - WASHER
Frigidaire
FWT445GES0
Washer - Residential
Frigidaire
FWT445GES1
Washer - Residential
Frigidaire
FWT445GES2
Washer - Residential
Frigidaire
FWT449GFS2
Washer - Residential
Gibson
GWT445RFS0
Washer - Residential
Gibson
GWT445RFS1
Washer - Residential
Gibson
GWT445RFS2
Washer - Residential
Gibson
GWT445RGS1
Washer - Residential
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service
Timer Knob Assembly
$ 128.63
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.

Close