EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

GWT445RFS2 Gibson Washer - Overview

Diagrams for GWT445RFS2

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Front Load Washer Door Lock and Switch Assembly – Part Number: 131763256
$109.23
In Stock
Front Load Washer Door Lock and Switch Assembly
★★★★★
★★★★★
(38)
Part #131763256
This door lock and switch assembly is manufactured to lock the door on your front load washer to prevent it from opening while it is running. You may need to replace the door lock and switch if the door does not open or lock. Your washer will not start if the door does not lock. This part is also known as a washing machine door lock assembly. As per the manufacturer, some models require a new wire harness and a door strike for this door lock assembly to work on the appliance. The original style lock would require the door lock kit.
Shock Absorber Kit – Part Number: 5304485917
$53.85
In Stock
Shock Absorber Kit
★★★★★
★★★★★
(27)
Part #5304485917
This shock absorber kit is an authentic OEM part that is sourced directly from the manufacturer. The kit includes two dual-stage shock absorbers, one spare shock mounting pin, and four locking nuts. These shock absorbers keep your front-load washer from shaking vigorously by absorbing and reducing vibrations from the wash and spin cycles of your appliance. This kit comes with two shock absorbers because it is recommended to replace both at the same time, as they wear at the same rate. To access your washer shock absorbers, simply remove the lower access panel after disconnecting the power to the appliance.
Door Catch – Part Number: 131279001
No Longer Available
Door Catch
★★★★★
★★★★★
(13)
Part #131279001
This washer door catch is a replacement from the original. This is only available in black.
Water Inlet Valve – Part Number: 134190200
$117.66
In Stock
Water Inlet Valve
★★★★★
★★★★★
(12)
Part #134190200
The water inlet valve has two ports for water to enter and controls the flow of water into a washing machine. Hot, cold, and warm water can easily enter the washer this way. If the water inlet valve is in any way damaged or defective, it may be slow to fill or even leak. Before beginning this replacement, make sure to unplug the washer from the power range or shut off the house circuit breaker. Remember to wear gloves for safety. Refer to the installation instructions and the diagram provided by the manufacturer for best results and accuracy.
Single Spring with Insulators – Part Number: 134144700
$60.56
In Stock
Single Spring with Insulators
★★★★★
★★★★★
(6)
Part #134144700
This is a single spring with insulator, but you may also know it as a suspension spring. It is a part for your washing machine. If your tub is no longer stable, which would cause shaking, moving, and excess noise, you may need to replace this part. The tools you will need in order to make this repair include a Phillips screwdriver and a pair of locking pliers. You will find the insulator on each end of this piece. We recommend replacing both springs in your appliance at the same time to ensure even wear.
Remote Style Pump with Motor – Part Number: 131268401
$200.22
In Stock
Remote Style Pump with Motor
★★★★★
★★★★★
(4)
Part #131268401
Use this with either a top load or front load washer. This pump has an horizontal mount.
Drain Hose – Part Number: 131461200
No Longer Available
Drain Hose
★★★★★
★★★★★
(12)
Part #131461200
This drain hose is designed for use in your washer. The function of this part is to carry water from the drain pump to the house drain. If your washer is leaking or will not drain, you may need to replace the drain hose. This part is black in color and is made of plastic. This drain hose comes with a 90-degree elbow attachment. Before you begin this repair, be sure to disconnect the power supply, as well as the water supply to the washer. This part is sold individually. This is an OEM part sourced directly from the manufacturer.
Screw – Part Number: 131302800
$25.25
In Stock
Screw
Part #131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. The main reason you would replace this screw is if the old screw is missing or damaged. This part is sold individually and is an OEM part sourced directly from the manufacturer.
SCREW – Part Number: 131168200
$26.35
In Stock
SCREW
Part #131168200
Sold individually.
Drive Belt - 6 ribs – Part Number: 134051000
$29.12
In Stock
Drive Belt - 6 ribs
★★★★★
★★★★★
(3)
Part #134051000
This is a drive belt for your washing machine. This part spins the basket in your appliance by connecting the drive motor to the drive system. You will need to replace the drive belt if your pumps are not spinning, your washer is not agitating, or you are noticing excess noise and/or a burning smell. This belt is black with six ribbings. To replace this part, you will need a Phillips screwdriver.
Timer Knob Assembly – Part Number: 131446200
$137.45
Special Order
Tub-To-Pump Hose – Part Number: 131784700
$79.32
In Stock
Tub-To-Pump Hose
★★★★★
★★★★★
(5)
Part #131784700
This washer tub-to-pump hose is designed to carry wastewater from the tub to the drain pump during wash and spin cycles, helping ensure efficient draining. It also includes a built-in trap that catches small items like coins or debris, helping protect the pump from damage. Made from durable rubber, it is an ideal replacement if the hose becomes cracked, blocked, or starts leaking, restoring proper drainage and reliable washer performance.

Manuals & Care Guides for GWT445RFS2

Click to download

Common Symptoms of the GWT445RFS2

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The door catch broke and the door would not close.
486 of 492 people found this instruction helpful.
  • Maryann from Sandy Hook, CT
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First, I had to remove 2 screws to take off the 2 broken pieces of the door catch. Then I put the new one on using the same 2 screws. The door is now able to close, but does not lock properly. In order to make it work, I put a thin piece of rubber into the place where the door meets the machine. This causes the lock to engage and the machine to work. I don't know how much longer it will work since the repairman claims that the main bearing is going, but hopefully it will last a bit longer.

Part Select got the part to me in one day using the standard shipping, which was impressive. I just wish that I hadn't wasted money on calling a repairman only to have him tell me that he didn't have the part. He charged for the visit anyway even though I told him ahead of time the problem and the model of my machine.
Was this helpful?
Thank you for voting!
Door on washer wouldn't lock or start
477 of 565 people found this instruction helpful.
  • DOUG from KING FERRY, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
1. Unplug unit.
2. Unscrew 2 nuts holding top in place in rear of unit using phillips head screwdriver.
3.Slide top back and remove.
4. Open door of washer and unscrew 2 screws holding in door lock unit.
5.Pull out unit from the top and install new unit reconnecting the 3 wire connections.
Was this helpful?
Thank you for voting!
Both vibration shock absorbers broken
181 of 196 people found this instruction helpful.
  • Douglas from Medical Lake, WA
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
removed 2 screws and removed top access cover. removed 2 screws and removed front access cover. removed 4 retaining pins (one with nammer and punch because it was stuck) connected lower ends of new shocks with plastic pins, extended each shock to slip fit and connected upper ends to wash tub mounts. Reinstalled panels. I wish I could sa y that it all went well from there but......when the shocks broke, apparently the hit the motor took was enough to cause an electronic failure of the speed cycle control chip. Now Im waiting for that part.
Was this helpful?
Thank you for voting!