Quick Question!

Have you ever purchased from PartSelect.com before?

382824-1-S-Whirlpool-675808            -Middle Spray Arm Kit
382824-1-S-Whirlpool-675808            -Middle Spray Arm Kit 382824-2-S-Whirlpool-675808            -Middle Spray Arm Kit 382824-3-S-Whirlpool-675808            -Middle Spray Arm Kit https://www.partselect.com/Schematics/Whirlpool/3RDUADFE.gif

Middle Spray Arm Kit

Your Price

$23.42
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS382824
Manufacturer Part Number 675808
Manufactured by Whirlpool

This middle spray arm kit includes an upper spray arm, a holder or hanger, water supply tube or delivery tube, split ring seal, and a screw. The function of these parts is to allow water to spray to all levels of the dishwasher so the dishes will come out completely clean. This kit has recently been redesigned. It does not include the upper support or mount, so consider ordering those parts as well if necessary. The spray arm is approximately 18 inches long, and all parts are white in colour. The only tool you will need to complete this repair is a Phillips screw driver.

This part works with the following brands: KitchenAid, Kenmore, Whirlpool.

This part works with the following products: Dishwasher.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Leaking.
  • Noisy.
  • Will not fill with water.
  • Not drying dishes properly.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Upper Spray Arm Mount

Part Number 11746245

**Please note: This is a redesigned part. The top mounting clip and screw are no longer needed.

$6.44
In Stock

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Helpful

Question:

Having a problem with my dishwasher. It isn’t washing. So checked for blockage and replaced both racks because they were getting grimey. What should I check next?

Sandy
Answer:

Hello Sandy, we recommend checking to see if the water level inside the dishwasher is low. If it is, you need to replace the water valve. If the water level is normal, you should remove the filters and clean them. If the filters are in bad condition you may need to replace them. Best of luck with this repair.

4 people found this helpful.
Question:

It seems like the dishes on my top rack are not getting fully cleaned but the dishes on the bottom are okay-ish. I haven’t been doing anything differently but I think I have a problem with my dishwasher. Im not experiencing any weird sounds or leaking though.

Crystal
Answer:

Hello Crystal, we recommend checking the filters in the bottom of the tub. If your filters are clear it is most likely a problem with the choppers. We will need your model number to know for sure. I hope this helps.  

3 people found this helpful.

Most Recent

Question:

Can i buy just the rubber tube part without buying the spray arm as well?

Michelle for model number 16705891
Answer:

Hello Michelle, thank you for contacting us. The tube part is not sold separately. It is only sold in the kit. Good luck with the repair!

Question:

Purchased this part to replace my spray arm and the rest of the assembly. Opened it up and there is no mount in the kit? Is mine missing it or does it not come with it and why wasn’t I warned? Unless this kit has been redesigned and it doesn’t need it? What’s going on?

Annette
Answer:

Hi Annette, this spray arm has been newly designed by the manufacturer and no longer comes with a support. Please let me know if you have any further questions.

3 people found this helpful.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 159 reviews What's this?
 

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Dennis from Yorktown, VA

Spray arm mount broken and supply tube cracked

First, I compared the parts visually. The mount is a slightly different design. I removed the old mount/spray arm and tube by removing the single screw through the upper mount and un-clipping the rear tube mount. Next I assembled the new parts using the old spray arm as a guide. Note: Installing the new screw for the spray arm into the new mount proved very difficult and I needed to enlarge the pilot hole slightly in order to assemble. I proceeded to attach the new mount to the upper rack and installing the rear tube mount. The new design of the mount eliminated the need for the upper mount and even if I wanted to install it, it will not fit the new design. Overall, an easy repair with a couple of hiccups.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Middle Spray Arm Kit
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Socket set
Customer: Elizabeth from New Oxford, PA

Holes in spray arm

Was having trouble for a couple of years that my top rack wasn't getting clean. Didn't check it out until my son bought a new dishwasher and hubby installed it. Couldn't believe the holes in the spray arm, went online googled it, found the part and in 2 days the part was at our door. Was very easy to install and now my dishes are very clean again!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Middle Spray Arm Kit
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Thomas from East Palestine, OH

Cracked spray arm

Held on by 2 small screwws, it was very easy to remove and replace the unit. The new piece fit good and works great. I'll keep this dishwasher much longer with the help of PartSelect!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Geri from Tampa, FL

The spray arm broke

I removed the broken part, went on your website, easily identified the need parts, order the parts, received them in four days ( a weekend was involved) and within about ten minutes of receiving the parts the dishwasher was fixed. We saved ourselves a repair visit and about $150.00. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Middle Spray Arm Kit
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Roy from Plato, MO

Upper arm original rubber hose melted; could not be used

The repair was easy...just removed a screw and 2 clips for the process. The repair kit came in 1 solid plastic piece molded together verses 3 seperate pieces (2 plastic end pieces and 1 rubber hose) like the original factory parts. There was 3 cm difference between the factory and repair part...still worked, just not what I expected.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Middle Spray Arm Kit
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Ryan from Boca Raton, FL

The plastic tubing which attached to the upper spray jets was ripped apart (fairly normal wear and tear)

I removed the screw from the top dishwasher tray and then proceeded to remove the screw undernearth the spray jets.

There were several parts that needed to be removed after the screws were taken off. They basically all came apart fairly easily.

Some parts I needed to keep and re-use, but most of them were replaced with the new Spray arm kit.

The kit included a new spray jet and the tubing that I needed to orginally replace. All the new parts were installed, using some of the old parts to complete the installation. I basically just remembered how everything was disassembled so that I could re-assemble the new parts. Otherwise, I would have had a hard time, since there were no step-by-step instructions.

It was fairly easy to figure things out, as most parts fit together nicely. Then I could use the 2 screws to tighten everything (which was much easier said than done).

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Salvina from Winter Springs, FL

Replaced parts (dishes weren't coming clean)

I played the video, and used the step by step instructions. I am considered a "girly girl" and was overwhelmingly proud that I, alone, was able to change the parts, as well as, save a bunch of money by doing this myself! Thank you Parts Select.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Carolyn from Vienna, VA

Spray arm broken

This was so easy. My husband removed the old and screwed in the new and for $50 we saved the price of a new dishwasher.
Great website! So easy to find parts and order!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Arthur from Whispering Pines, NC

Water leaking out bottom of dishwasher dooe

After nearly 2 hours of looking, Mr. Appliance finally discovered that the rubber manifold to the upper spray arm had a big hole in it. The replacement manifold is plastic, not rubber, and requires that the upper spray arm be replaced also. There are two screws holding the manifold and spray arm to the upper rack. It' will save you time if you only unscrew the bottom screw! The bearing for the lower spray arm was badly worn allowing the arm to wobble. This wobble might been the major problem related to water leak. Excessive wobble can create an unwanted wave action in the dishwater, causing water to leak under the front door. The bearing was very easy to replace. I also ordered a new pump outlet seal, but did not install it since the dishwasher works like new and doesn't leak water anymore. While checking earlier for possible leaks, the lower front panels were removed. The sound insulation on one of the panels was wet due to water leaking under the door. Reinstalling the panels, after allowing the insulation to dry, was the hardest and most time consuming part of the repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Luis from Coral Gables, FL

The dishwasher was leaking

These parts were VERY easy to install. The dishwasher works perfectly now.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Michael from Provincetown, MA

Leaky door and broken spray arm

Removed the old door gasket and gently pushed the new one in place in less than 5 mins .The new one fit perfectly, and.......No leaks !
The cracked upper spray arm assebly also was disassembled in 5 mins, and quickly replaced without any problems...All parts fit and worked great.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
  • Middle Spray Arm Kit
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Andrew F. from Vienna, VA

Painless and smooth

The dishwasher upper wash arm water feed tub failed due to old age.
The website with its parts pictures made ordering the correct part a breeze.
The part arrived the next day and was a perfect fit. It took one screw driver and 10 minutes to replace the three parts.
Works like a dream. The dishes are cleaner then they have been in months.
By the way the savings were over $150 vs call a repair man.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Middle Spray Arm Kit
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Ruth from Freehold, NJ

The rubber tube on the middle spray arm was worn out and the upper dishes weren't getting clean.

Followed the directions on the video and they couldn't have been easier. I'm a 63 year old grandmother and like to fix things myself.... The part came the day after I ordered it. The part works wonderfully.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Middle Spray Arm Kit
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Otto from Wildwood Crest, NJ

Spray arm was rubber and deteriated

Exactly as your video showed

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Middle Spray Arm Kit
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Rose Mary from Arlington, AL

Spray arm water intake hose disintegrated, water leaking from bottom of door.

Since I'm 84 years old, I called a friend who did the work. The original part was easy to disassemble. Replacing the gasket took the most time.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

PartSelect Number: PS382824
Manufacturer Part Number: 675808
Brand Model Number Description
Kenmore110773811Dishwasher
Kenmore110773812Dishwasher
Kenmore110773813Dishwasher
Kenmore110773881Dishwasher
Kenmore110773882Dishwasher
Kenmore110773883Dishwasher
Kenmore66515701890Dishwasher
Kenmore66515701891Dishwasher
Kenmore66515705890Dishwasher
Kenmore66515705891Dishwasher
Kenmore66515708890Dishwasher
Kenmore66515708891Dishwasher
Kenmore66515772990Dishwasher
Kenmore66515777990Dishwasher
Kenmore66515779990Dishwasher
Kenmore66515791791Dishwasher
Kenmore66515791792Dishwasher
Kenmore66515791793Dishwasher
Kenmore66515795790Dishwasher
Kenmore66515795791Dishwasher
Kenmore66515795792Dishwasher
Kenmore66515795793Dishwasher
Kenmore66515798792Dishwasher
Kenmore66515798793Dishwasher
Kenmore66515801890Dishwasher
Kenmore66515801891Dishwasher
Kenmore66515805890Dishwasher
Kenmore66515805891Dishwasher
Kenmore66515808890Dishwasher
Kenmore66515808891Dishwasher