Upper Spray Arm Mount WP8539324

Unlatch the rail clips on upper rack slides, slide rack off the rails. Flip rack upside down, use a philip screwdriver and remove screw that holds propeller to upper spray arm mount. Remove clamp of broken spray arm mount with philip screw driver. Replace with new upper spray arm mount (different design) and no tools needed. Just snap it in place where old one was. Put propeller over the spray arm mount and reuse screw with washer to tighten. Return rack back in the dishwasher and reattach the rail clips. For the rinse aid cap, the cap broke off. I used a nose plier to remove (unscrew) the remaining piece. Replace with new rinse aid cap. Dishwasher is running normal again.

Removed holding stew from old style bracket. Put arm together with new mount and installed screw. Aligned arm with upper rack and just clicked on. Ensuring spray arm spun freely and done!

I went back to the web site to make sure I'd ordered the right part.?? looked at the diagram and then watched your little video.?? He had the part hooked opposite of what was shown. (The arm wouldn't rotate) So I turned it arround. While he was still??. It took me less that 5 min and the dishwasher is working Great.????

I ordered the parts. When they came I was able to repair the parts to my rack. At first I put the tube holder on backwards then when I changed it everything worked great. My mount was also broken. I ordered a new mount and I installed it. The repair saved me from buying a new dishwasher, ?????? your video was very helpful. Be sure to put the stops on the rack properly..

Watched repair video attached new parts and was done

Used a screwdriver to put on new piece without any trouble.

Removed upper tray, unscrewed upper arm mount. Clipped on new mount screwed middle spray arm to mount, clipped on support mount for arm and inserted spray into hanger. Reinstalled tray and stop clips.

replaced those parts... but lingering doubts about adequacy of water supply due to sediment primarily from old iron pipes, evidenced in faucet aerator. So I added a Rusco hot water sediment trap filter to the supply line leading to the dishwasher and faucet, along with a new flex supply line to the dishwasher. Water supply seems improved, and any potential sediment will be caught by the trap.The time, tools, and complexity of adding the hot water sediment filter are not covered in the above.

I followed the illustrative that accompanied the part and bingo, it was done. The instructional video was perfect....

I watched the Video and it was so easy. I feel I saved my self an 85.00 charge for an appliance repair person.