Fabric Softener Dispenser 63580 | Official Whirlpool Part | Fast Shipping | PartSelect
Fabric Softener Dispenser – Part Number: 63580
Fabric Softener Dispenser – Part Number: 63580 https://partselectcom.azureedge.net/Schematics/Maytag/IKSIN38F.gif

Fabric Softener Dispenser

Product Description

Fabric Softener Dispenser Specifications

Use this dispenser for your direct drive washing machine.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Does not dispense fabric softener / detergent | Will not agitate | Will not drain

This part works with the following products:

Washer.

This part works with the following brands:

Whirlpool, KitchenAid, Inglis, Estate, Roper, Crosley, Amana, Maytag, Kenmore.

Part # 63580 replaces these:

1195942, 63580, AP3048948, W10795104, W10832235.
Questions and Answers
Ask our experts a question on this part and we'll respond as soon as we can.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Part Videos

Replacing your Whirlpool Washer Fabric Softener Dispenser

Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 23 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dennis from Port Orchard, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
63580
No fabric softener dispenser
Pop the center cap off the agitator and snap the dispenser in. Easy as 1-2-3.
43 of 61 people found this instruction helpful.
Was this instruction helpful to you?
Robin from Westwood, NJ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
80040, 63580, 285587
the agitator arm that rotates the clothes was not moving
pull up and off the fabric dispenser, remove the nut in the middle, and pull the piece off. underneath are 4 plastic things (dogs) that will just fall out. replace them (because they have little plastic things that jut out) and wear away. maneuver the piece back in place and tighten the screw back into place.
SAME JOB BY REPAIR CO. COST ME $95.00 THE FIRST TIME. WE USE HEAVY LOADS AND THE DOGS WEAR OUT AFTER A FEW YEARS. NOW I JUST CHANGE THEM MYSELF.***DID I ADD THAT I AM A WOMAN****
26 of 702 people found this instruction helpful.
Was this instruction helpful to you?
Timothea from Buckeye, AZ
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Parts Used:
WPW10072840, 80040, 63580
Washer machine wouldnt wash
Turns out the agitator directional cogs were really worn and chipped so they werent allowing it to rotate therefore my clothes were not comming out clean. Also upon taking apart the agitator i saw that the fabric softener dispenser was VERY clogged with gunk! I had bought this appliance used so i really had no idea.
So first i removed the fabric softener dispenser, then the cap then i loosened the 7/16th bolt to release the top 1/2 of the agitator and then took the dogs (or cogs as other people call them) out and replaced them, then did the steps in reverse to put it back together. Before i put it together i had to really clean all the gunky build up.
Works like a charm!
21 of 696 people found this instruction helpful.
Was this instruction helpful to you?
David from Jonesboro, GA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
WPW10074580, 63580, 285811
Ratchet assembly in upper half of agitator would not engage.
Fabric softener dispenser snaps in. Apply sideways pressure to snap out. Reach inside agitator and remove agitator cap barrier seal by pulling on tabs. Using socket with extension remove center bolt and rubber seal. Remove upper agitator assembly. Follow instructions provided in agitator repair kit to replace and re-install ratchet ratchet dogs and carrier. Reassemble in reverse of disassembly. Note: Apply a small amount of liquid dish washing detergent to agitator barrier cap seal to ease in re-installation.
15 of 612 people found this instruction helpful.
Was this instruction helpful to you?
Liz from Winchester, KS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
63580
Washer model didn't come with softener dispenser
Just bought my washer and dryer from Home Depot, but bought an Admiral model that didn't come with a fabric softener dispenser. Ordered the part from PartSelect and after rocket fast shipping installed it in seconds. The installation required no tools as the dispenser just snapped right in. My clothes are now soft and free of static cling. Thank you PartSelect!!
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Alex from Madisonville, KY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
WR57X10051, 63580, WP3348752, 285811
Washing Machine Agitator not moving much
First take Fabric Softener Dispenser and cap off Agitator, locate nut, unscrew and wiggle up and out. Agitator Repair Kit comes with the cam dogs and assembly that you put together. (They will only fit one way) I opted to get the Upper Agitator as well since the old one had frayed edges. It is easier to turn over the Upper Agitator and place the assembled Repair Kit inside it then turn over and replace in original position. Using old nut, screw to the lower agitator. Replace cap and Fabric Softener Dispenser.
9 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Teresa from Elkin, NC
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
63580, 3949247V, 285811
The top part of Agiator would not spin
I watched the video, it went step by step, the screws were not the same as on the video but not hard to figure out how to take control top off. The rest was easy, the video was so easy to follow. The only problem I had was trying to put the cabinet back on the base, I had to have my husband help me, otherwise it was easy. This is the first time I have ever tried to fix a washing machine, I had been looking at new ones, but I decided to try my hand at fixing the problem and I am glad I did,my husband is so proud that I did it by myself that he is telling all our family and friends. I will shop this website again. Thank you
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
WILLIAM from CORAOPOLIS, PA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set
Parts Used:
80040, 63580, 357574
Agitator would not turn
Removed the stud bolt in the ag[tator and removed the agitator from the machine. J then seperated the agitator in two pieces and installed the new dogs.I then installed the agitator back in the washing machine and it performed beautifully
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Bruce from BLUE POINT, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
63580
Machine delivered without fabric softener dispenser.
Removed the cover where the dispenser would have been installed and snapped the new one in. 5 minutes. When useing the dispenser after adding softener make sure to fill the dispenser with water to dilute and prevent staining.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
William from Mokena, IL
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers
Parts Used:
WP63907, 63580
Washer tub off-balance during spin
This washer does not have a removable front panel, so the spring replacement was made from the bottom of the unit, with the washer lying down on its face. This put two of the springs in tension which had to be relieved by propping the tub. The springs had removable bottom clips which made the job much easier.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
4 Reviews
5
out of 5
Filter By Rating:
  • 5 Stars
    4
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS381197
Manufacturer Part Number: 63580
Brand
Model Number
Description
Whirlpool
1CLSQ9549PG0
Washer - Residential
Whirlpool
1CLSQ9549PG1
Washer - Residential
Whirlpool
1CLSQ9549PW0
Washer - Residential
Whirlpool
1CLSQ9549PW1
Washer - Residential
Whirlpool
1CLSR7010PQ0
Washer - Residential
Whirlpool
1CLSR7010PQ1
Washer - Residential
Whirlpool
1CLSR7333PQ0
Washer - Residential
Whirlpool
1CLSR7333PQ1
Washer - Residential
Whirlpool
1CLSR9434PQ0
Washer - Residential
Whirlpool
1CLSR9434PQ1
Washer - Residential
Whirlpool
1CLSR9434PT0
Washer - Residential
Whirlpool
1CLSR9434PT1
Washer - Residential
Whirlpool
1CLXR7244PT0
Washer - Residential
Whirlpool
1CLXR7244PT1
Washer - Residential
Whirlpool
1CWTW4815EW0
Washer - WASHER
Whirlpool
1CWTW4815EW1
Washer - WASHER
Whirlpool
1CWTW5300SQ0
Washer - Residential
Whirlpool
2DLSQ7533JQ0
Washer - WASHER
Whirlpool
2DLSQ7533JQ3
Washer - Residential
Whirlpool
2DLSQ7533JQ4
Washer - Residential
Whirlpool
2DLSQ7533JQ5
Washer - Residential
Whirlpool
2DLSQ8000JQ0
Washer - Residential
Whirlpool
2DLSQ8000JQ3
Washer - Residential
Whirlpool
2DLSQ8000JQ4
Washer - Residential
Whirlpool
2DLSQ8000JQ5
Washer - Residential
Whirlpool
2DLXR7244MQ0
Washer - Residential
Whirlpool
2DLXR7244MQ1
Washer - Residential
Whirlpool
2DLXR7244MQ2
Washer - Residential
Whirlpool
2DLXR7244MQ3
Washer - Residential
Whirlpool
2DWTW4705EW0
Washer - WASHER