Maytag/Maytag_Thumb/50671.gif
See part 25 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Single Outlet Water Valve Kit

★★★★★
★★★★★
12 Reviews

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS358631
Manufacturer Part Number 4318047
Manufactured by Whirlpool
Product Description

Single Outlet Water Valve Kit Specifications

This part is a solenoid-operated switch located at the bottom of the refrigerator. When the water inlet valve is turned on, water is released from the supply line through the water valve and into the compact icemaker mold. The kit includes the mounting hardware and bracket plastic tubing fittings. The retaining nut must be cut off the plastic water line and gently pushed into the new valve. To remove, press down on the ring that the tube slides into. Refer to the installation instructions for further guidance. Please note: the manufacturer has redesigned this part and it can appear different than the original. It has a new quick connection.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Leaking | Ice maker won’t dispense ice
This part works with the following products:
Refrigerator, Freezer, Ice Maker, Grill.
This part works with the following products:
Kenmore, Amana, Admiral, Whirlpool.
Part# 4318047 replaces these:
AP3103467, 3456, 0054542, 1-16305, 1014, 116305, 12001415, 4210524, 4318047VP, 4339671, 4339713, 46000482531, 46000627558, 46004210524, 482531, 53753-1, 544047, 544617, 544620, 55996-1 ... Show more , 55996-3, 55996-5, 564352, 564640, 6-25765, 6-25793, 6-27143, 6-27453, 6-27461, 60184-1, 60184-3, 60184-4, 61001019, 625717, 625734, 625765, 625793, 625796, 625926, 625985, 626083, 626084, 627007, 627074, 627117, 627133, 627143, 627173, 627194, 627217, 627223, 627233, 627263, 627281, 627339, 627341, 627342, 627349, 627362, 627382, 627383, 627384, 627450, 627452, 627453, 627456, 627459, 627460, 627461, 627462, 627495, 627497, 627543, 627550, 627558, 627595, 627624, 627661, 627701, 627713, 627752, 627767, 627820, 627821, 627908, 627910, 627929, 627932, 627935, 627975, 627976, 627978, 628117, 675733, 69347681, 69362583, 716328, 819495, 819497, 819498, 8214, 831429, 876033, 935, 978439, 99989712, A3034201, C8923201, D3961503, D3983903, D7022103, D70368-3, D7036803, D7121403, D7261703, D7712601, D7712602, D7712603, IH2003, IMV460, K-51705, K51705, R0175008, R0175012, R0175015, R1750-12, R1750-8, Y04719508, Y625765, Y625793, Y627143, Y627453, Y627461 Show less
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

3 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Paul
    November 28, 2017
    How do you repace a water valve for a fridge the water is coming out in drips. For a Maytag
    Hi Paul, Thank you for your question. There is a video on our website that you can reference on how to install the. The may not be exactly like the one you have, but it will give you a general idea on how to install it. You will find the video under part number PS11743618. I hope this helps. Thank you and have a great day!

    6 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Jimmy
    February 14, 2018
    Single water valve kit, how to put the plastic water line on valve and compression nuts on plastic tubing
    Hi Jimmy, Thank you for the question. According to the description, The retaining nut must be cut off the plastic water line and gently pushed into the new valve. Hope this helps!

    4 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Fred
    December 13, 2021
    Our refrigerator leaked from the water pump bottom side side. Ice maker still worked fine. I identified what looked like the correct solenoid replacement part, but Samsung was not listed among appropriate makers. Can you help?
    For model number RFG237AARS
    Hello Fred, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS4175482. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Customer Repair Stories
       Average Repair Rating: 4.1 / 5.0, 24 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      no water getting to ice maker
      The ice maker had been slowly dying and one day just stopped making ice. No water was getting to the trays.

      I read that this could be caused by a failure of the valve, even though the continuity test indicated that the solenoid was okay.

      I ordered the part Friday afternoon. It was delivered Saturday. I did the repair in 10 minutes.

      I pulled the fridge away from the wall.

      I unplugged the fridge. I closed the water supply valve.

      I unscrewed the two mounting screws using a flat head screwdriver.

      I pulled the old valve out from refrigerator.

      Using an adjustable wrench I detached the water supply from the valve. I detached the hose leading to the ice maker from the valve.

      I pulled the electrical connectors from the connectors on the valve.

      I attached the hoses to the new valve, attached the electrical connector, screwed the new valve in its place, opened the water supply, plugged the fridge back in, checked for leaks, and waited for a few hours.

      My ice maker is working better than it has in at least two years.
      • Kevin from Boston, MA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers, Wrench (Adjustable)
      79 of 89 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Water valve failed, flooded kitchen
      Turned off water supply and unplugged appliance. Removed lower panel on back of refrigerator with 1/4 " nutdriver. Then removed supply line, and line to icemaker. removed valve from back panel and replaced with new valve. wrapped water connections with teflon tape, turned on supply line, checked for leaks, everything o.k..Replaced back panel and in 45 minutes had first drop of ice. Job requires moderate mechanical ability and minimum tools. Saved a PANT load of money by doing it myself. VERY satisfied with Partselect.com
      • James R from Valley Springs, CA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Wrench (Adjustable)
      24 of 25 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Ice water valve leaking
      Removed two screws holding valve, removed two 1/4" water lines. disconnected wire clip from old valve.
      Installed new valve, connecting water and electrical with ease.
      Absolutely Simple!
      • Byron from Steamboat Springs, CO
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Nutdriver, Pliers, Wrench (Adjustable)
      10 of 10 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      ice maker, intermittent hollow cubes, then no ice
      I was not sure what was causing the problem, I thought at first it was low water pressure causing the hollow ice cubes. After some trial and error testing I figured a likely cause could be the water valve in the ice maker itself. I replaced that part rather easily using the existing fasteners in about 15 or 20 minutes. The ice maker has been working flawlessly since the repair.
      • paul from madison, WI
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Screw drivers, Wrench (Adjustable)
      9 of 11 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      No water in icemaker tray.
      Confirmed that the solenoid controlled water valve (Part # PS358631) between the water source and the back of ice maker was defective. I did this by removing the valve and plastic hose from the back of the refrigerator and pointed the end that went into the icemaker towards the sink. I applied 110 volts to the valve and noted that no water was getting through. Replacing the valve was a snap.
      • Robert from Myrtle Beach, SC
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver
      8 of 9 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      water pump for ice maker would not shut off
      First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...) Then I put the new valve in, put the cover back on the refridgerator and was done. total time 15 minutes. My wife says I'm the man.
      • Lawrence from Clio, MI
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers, Wrench (Adjustable)
      7 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Ice maker slowed down, then stopped producing
      First pull out frig and unplug. Shut off water valve. I just had to remove two screws to disconnect unit from bottom rear corner of frig. Pull element out just a few inches and disconnect the plug that feeds it electric. Disconnect water hose and reattach to new unit. Reconnect electric plug and reinstall in back of frig, securing with two screws. I have an older appliance, so I had to jury rig a bit when reattaching new unit by drilling two new holes for mounting. Also, I had to buy a new water hose because the old part would not accept the standard female end of the hose to connect to. Home Depot has the standard icemaker hoses with two female ends. These two glitches would probably not apply to a newer appliance, but anyway, it's cranking out the ice just fine now! Sure I saved alot of money, even with the extra $10 investment for the hose.
      • Paul from Sharpsburg, GA
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Socket set, Wrench set
      5 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      wasn't making ice. The ice bin actually filled up with water.
      Removed old valve first, found part # on it.
      Entered part # into search box on computer.
      It came up with the right replacement part the first time!!!
      Ordered part, it came in sooner than I thought it would.
      I attached the supply line, pushed in the plastic outlet hose, connected the power line, and attached it to the refrigerator frame. We had a full container of ice the next morning.It couldn't of had been easier.
      • Bob from Middlefield, CT
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers, Screw drivers
      5 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Ice Maker Quit Making Ice
      Ice make was still working but no water coming in to make ice . Pulled refrigerator back and found water valve at bottom of refrig close to the floor. I disconnected water line and electric plug - went to whirlpool web site - no help at all to confusing - found partselect and compaired picture of old valve with picture of new valve . When I got it in mail it took 30 min to install - working fine now hint - mark top of electric plug so you install correctly
      • WILLIAM from Altamonte Springs, FL
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Screw drivers, Wrench (Adjustable)
      5 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      My U-line ice maker quit filling.
      I used this part on a little, under-counter U-line ice maker that is the best little ice maker in the world. The single solenoid part from U-line cost more than twice as much as the generic GE one I ordered from you. It arrived in only 2 days and I was able to just remove the inlet and outlet line from the old solenoid and unscrew the bracket to remove it. I used the included bracket and one screw affix the new one to the ice maker, then just pushed on the inlet and outlet lines, tightened them on, plugged it back in and In about 20 minutes from start to finish, it was back in business, cranking out ice really quick as it was before. Could not imagine summertime in Texas without my U-line,,,Thank you!!!
      • Anne from Arlington, TX
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Screw drivers
      5 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      12 Reviews
      4.3
      Filter By Rating:
      • 5 Stars
        6
      • 4 Stars
        4
      • 3 Stars
        2
      • 2 Stars
        0
      • 1 Star
        0
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS358631
      Manufacturer Part Number: 4318047
      Brand
      Model Number
      Description
      Kenmore
      1061105299
      Ice Maker
      Kenmore
      1061118553
      Ice Maker
      Kenmore
      1061118555
      Ice Maker
      Kenmore
      1065730523
      Refrigerator
      Kenmore
      1065730563
      Refrigerator
      Kenmore
      106625480
      Freezer
      Kenmore
      106625481
      Freezer
      Kenmore
      106625482
      Freezer
      Kenmore
      106625490
      Freezer
      Kenmore
      106625491
      Freezer
      Kenmore
      106626124
      Ice Maker
      Kenmore
      106626332
      Ice Maker
      Kenmore
      106626334
      Ice Maker
      Kenmore
      106626392
      Ice Maker
      Kenmore
      106626452
      Ice Maker
      Kenmore
      106626480
      Freezer
      Kenmore
      106626490
      Freezer
      Kenmore
      106627481
      Freezer
      Kenmore
      106627483
      Freezer
      Kenmore
      106627484
      Freezer
      Kenmore
      106627491
      Freezer
      Kenmore
      106627493
      Freezer
      Kenmore
      106627494
      Freezer
      Kenmore
      106627608
      Ice Maker
      Kenmore
      106628480
      Freezer
      Kenmore
      106628481
      Freezer
      Kenmore
      106628490
      Freezer
      Kenmore
      106628491
      Freezer
      Kenmore
      106628530
      Freezer
      Kenmore
      106628531
      Freezer

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service