Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Michael M - December 23, 2021
Verified Purchase
It's not the right part.
Even though it says it's right for my range and it comes close, there's a difference in the electrical hook ups that doesn't work for my range.
December 24, 2021
Hi Michael,
Thank you for your review. Please accept our apologies for this situation. We will be in touch with you shortly regarding your order.
★★★★★
★★★★★
Harry L - June 4, 2018
Verified Purchase
great part
part is working great, stove and burners are good
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
There was no instructions. The wires don't match up old vs new. I read the reviews and this helped.
However the 1a 1b etc. Are very hard to see thus the need to magnify. Then it was easy. I must say the guy I talked to was very nice.
Lisa from APACHE JCT, AZ
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The smaller element of a dual element stove would not heat up.
Unplug the unit or turn off power at the electrical panel!!!! I removed the 2 screws that hold the top surface of the stove down. On my range, these are located in the front, under the the top surface. You have to open the oven door to remove them. I propped the top up with a couple of 10 inch pieces of 1 x 2 then removed the screws o
... Read moren each end of the bracket that holds the elements in place. I used a 1/4 inch nut driver for these. With needle nose pliers, I removed the 3 retaining clips from the bracket and removed them from the element with a screwdriver and transferred them to the new heating element. The holes around the outside of the element are numbered so it's easy to know where they go. Laying the new element next to the old one, I moved each paddle-type electrical connection one at a time to the corresponding place on the new one. Put the retaining clips back in the slots. Screw the mounting bracket back in. Put the top down and secure it with screws. Very easy repair.
Read less
Debra from DISPUTANTA, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
15 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Amy
November 27, 2018
Part select# ps3408889
Manf. Part # 316282100
Is this difficult to install yourself?Thanks!
For model number E130ef55gsf
Hello Amy, Thank you for the question. Previous customers have been able to do the repair on their own and said it was fairly easy to do. Hope this helps, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
December 3, 2021
Is this element the dual 9 inch, 12 inch element?
For model number 79096342503
Hello Michael, Thank you for your inquiry. We have researched the model number you have provided and we show that this is the dual element on the front right. It measures 12 inches in diameter. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Matthew
October 11, 2023
1) Will this part 316282100 fit my model whirlpool FEFL79GCA (serial no. FV71543599) stove top, replacing the double (large/small) element eye?
2) Is this an OEM part?
For model number FEFL79GCA
Hello Matthew, thank you for reaching out. Yes, we only sell OEM parts. The dual radiant surface element, part number PS3408889, you mentioned, fits your model. We hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gabriel
June 4, 2022
The Original Part # is 316464901, this part was discontinued and was replaced with part #316282100. I purchased this item twice from different vendors and they did not work on my range. Are there any other burners that might work ?
For model number GLEFZ384GCA
Hello Gabriel, thank you for writing. The Front Right element is part PS3408889. The Front Left element is part PS2581859. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.