Lower Handle End Cap - Stainless Steel

I ordered new "stainless" upper and lower handle end caps -the caps (brackets) are actually coated plastic, not steel. With age they became brittle and broke resulting in handle coming off unit.
Repair was pretty straight forward:
1. unclip door wiring harness
2. remove door
3. unscrew door back plate
4. remove spring loaded door latch
5. remove handle by unscrewing handle caps from the back side of the door.
5. remove screw attaching old handle cap(s) from handle and replace with new cap(s)
6. remount handle on door (reverse of step 5). Note that on my unit the handle mounting area on the door was torn away leaving a large hole. I used a large washer to span the hole in the door in order to remount the handle. New doors were not available on this model thus the jerry rig.
7. reassemble door back plate and latch
8. remount door and attach wiring harness

Used spatula to remove inner door plastic beauty-ring to get to the eight (?) screws that hold the door together. Removed enough of the eight screws to gain BETTER access to the screw needed to secure the lower door handel. Secured door handle then reassembled door.