GE/GE_Thumb/00115320i02.gif
See part 282 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Halogen Light Bulb - 120V 20W

★★★★★
★★★★★
35 Reviews
$ 9.31   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS2351821
Manufacturer Part Number WB25X10019
Manufactured by GE
Product Description

Halogen Light Bulb - 120V 20W Specifications

This light bulb is located on the inside of your microwave. The bulb is behind the top grill. It will need to be replaced when it has burnt out and no longer works. Unplug the unit before beginning this repair. Remove the top grill of your microwave, use your screwdriver to open the light socket, scrape off any silicone holding the bulb in place, clean the area of any oil and dirt, insert the new bulb into the socket without touching the bulb, slide the holder back into place, line up the tabs on top of the metal plate, and secure the holder back into place.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Microwave, Microwave Oven Combo.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WB25X10019 replaces these:
AP4380308, 1472843, WB25X10019, WB08X10050, WB36X10246, WB36X10344
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

31 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Anna
July 20, 2017
I don’t know how to do this installation... I know where the light is but its covered and I don’t want to break it
Hi Anna, the light cover should easily just pop off, and from there you should be able to change the bulb. If you are not able to pry the light cover off, check if there are any fasteners holding it in place, and remove those. If you are still not able to remove it, you may need to replace the light assembly WP74009970. Please let us know if you have any further questions.

9 people found this helpful.

Was this helpful?
Thank you for voting!
Maya
July 20, 2017
So I donnot like purchasing things online but the light inside my convection oven went out and I wanted to buy a new one. I went to the local home hardware store and they recommended me this 50W bulb but when I was online I was told to use a 20W bulb. Is the 50W bulb safe to use in the conv. oven?
Hello Maya, your model is designed to use a 20W bulb. With that said we recommend not going over this wattage as it is the maximum for your model. I hope this helps!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Rosaire
September 22, 2017
The bottom of micro surface light burnt out. I have the bulb wb25x10019. We cannot fit the bulb into its slots, why ? Thanks. Rosaire
For model number JVM1950SR1SS
Hi Rosarie, Thank you for your question. I do not know why you would not be able to fit the bulbs into your sockets. This is the correct part for your appliance according to your model number. Perhaps you received defective parts. If you ordered them from us, I would suggest contacting customer service with the model and serial number of your appliance so that we can do a warranty for you. Good luck.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Ron
October 30, 2017
What is the proper halogen bulb (watts) to use to replace the bulb at the top of the microwave that lights up the inside of the microwave?
For model number JNM1951SR1SS
Hi Ron, Thank you for the question. The bulb that lights the inside of the appliance is 120V and 20W. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Jo
January 27, 2018
Night light bulb burned out. Located under microwave and shines light on surface of range. The video gives instructions for a bulb inside the microwave. What size bulb should i purchase? The serial number is vm905103 b and the model is pvm2070sm1ss. Thank you!
For model number PVM2070SM1SS
Hi Jo, Thank you for your question. There is some information that a customer left on our website that you may reference for more information, "First I removed the single screw holding the lens assembly in place. Then I lowered the assembly and tilted it until it came out. To remove the existing cracked glass lens there were four tabs bent down on it. By hand I lifted each tab just enough to remove the broken lens. I then replaced the broken lens with the new one and re-bent the tabs down by hand to secure them to the new lens. The lens assembly, now removed, revealed the cavity that contained the two halogen bulbs. Since they were both burned out for days, they weren't hot so I could pull each one out by hand. The bulbs are secured by two straight heavy gauge wire leads and provided a little resistance but come out fairly easily. Make a mental note of the angle they came out so it will be easier to replace them with new ones. You're not supposed to touch halogen bulbs with your bare hands, so I used the bubble wrap they came in as a means to hold the bulb while installing it. Be sure to insert the bulbs at the same angle they came out so the pins do not get bent. Once both bulbs are in place, replace the lens cover assembly by putting the end opposite where the screw hole goes in first on the right, then swing it up until flush and screw it down." I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Dan Dunham
January 10, 2018
What are the watts and the volts of the bulb on the underside of the oven? Like 120v and
For model number sca100hbb 04
Hi Dan, Thank you for your question. The bulbs for the underside of the oven are 20 watts-12 volts AC. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Lana
February 15, 2018
I am replacing the light bulb under the microwave and can't find a part number. I have gone to lowes and none of the bulbs show a part number. Can you tell me which bulb i need for this microwave? I bought one pack of bulbs that only has a number of gy8.6
For model number DVM7195EF1ES
Hi Lana, Thank you for your question. The part number listed under your model number for bulb that goes under your microwave is PS2351821. It is the same bulb that goes inside the microwave. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Ruth
September 11, 2017
The light that shines down onto the stove top burnt out. How do i replace it and with what size bulb. Thank you
For model number PNM9196SF1SS
Hi Ruth, Thank you for the question,You will need to replace the Halogen Light Bulb - 120V 20W. The glass cover will slip out of the frame and expose the light bulb. The bulbs just pulls out of the socket. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Steve
July 20, 2017
How do I remove the light cover over my range??
Hi Steve, to remove the cover all you will need is a Phillips head screwdriver. Once the screw is out, the light cover should easily open. Best of luck with this repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Matthew
September 23, 2017
I need to replace the light bulb. The instructions say remove the drill. Dose this mean i have to slide the unit out from it;s shell or can i access it from the inside of the unit? I can see where it is located but i need the simplest way to change it. Thanks
For model number JVM3670BF001
Hi Matthew, Thank you for your inquiry. There is a video listed with the halogen light bulb just under the photo of the part that you may reference on how to install it. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Part Videos

Replacing your General Electric Microwave Halogen Light Bulb - 120V 20W

Customer Repair Stories
 Average Repair Rating: 4.5 / 5.0, 36 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Lens cracked and bulbs burned out
First I removed the single screw holding the lens assembly in place. Then I lowered the assembly and tilted it until it came out. To remove the existing cracked glass lens there were four tabs bent down on it. By hand I lifted each tab just enough to remove the broken lens. I then replaced the broken lens with the new one and re-bent the tabs down by hand to secure them to the new lens.

The lens assembly, now removed, revealed the cavity that contained the two halogen bulbs. Since they were both burned out for days, they weren't hot so I could pull each one out by hand. The bulbs are secured by two straight heavy gauge wire leads and provided a little resistance but come out fairly easily. Make a mental note of the angle they came out so it will be easier to replace them with new ones.

You're not supposed to touch halogen bulbs with your bare hands, so I used the bubble wrap they came in as a means to hold the bulb while installing it.

Be sure to insert the bulbs at the same angle they came out so the pins do not get bent.

Once both bulbs are in place, replace the lens cover assembly by putting the end opposite where the screw hole goes in first on the right, then swing it up until flush and screw it down.
  • Mark from GRAND BLANC, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
  • Parts Used:
    WB25X10019, WB36X10071
213 of 292 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
none
I had no troubles!

Thank you...
87 of 163 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Under the vent light bulbs needed to be replaced
Turned of f the circuit breaker to the microwave. Unscrewed the cover (1 screw!) popped out the old bulbs and plugged in the new ones, using the bubblewrap as a handle to be sure my skin didn't touch the light bulbs so the oil from my hands didn't damage or shorten the life of the new bulbs. Turned the circuit back on. That's it!
  • Robert from Naples, ME
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WB25X10019
56 of 76 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
This lamp does not have easy access
This is the second time that this lamp hase gone out. It is located in a small space in the top of the microwave and you need to remove the top front pannel, then take a screw or two out of a metal shield and bend the shield up to get your hand into the compartment where, if you know how, you can reach in and lift out the reflector shield that the lighbulb is plugged into and remove the old one and plug in the new one. The first time was hard to figure out how to do it but the second time wasn't bad because I knew how to do it.
  • Walter from Midvale, UT
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WB25X10019
31 of 50 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
halogen bulb burned out
*Remove Two Phillips head screws from the top of vent slide the vent left to remove it. Take the charcoal filter out then the metal cover underneath the filter. It also has a phillips head screw. bulb socket is on right facing down. Squeeze the metal clips and remove socket from bracket. Installation is the reverse of removal.
  • Thomas from Wake Forest, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WB25X10019
22 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Two counter light bulbs burned out
After removing the screws holding the 2 cover plates in position, I removed the halogen light bulbs with my fingers. Then I placed a paper towel around the first replacement bulb and lined up the two wire connectors with the two holes in the receptacle. I pushed in, but the bulb's probes did not slide into the receptacle. I spent five minutes aligning and pushing but to no avail. Then I removed the filter screen on the side of the receptacle, shined a flashlight beam on the receptacle, and with an improved view of the two holes in the receptacle, slid the bulb in. The second bulb was inserted in a few minutes, and the job was done. Whoever designed the halogen bulb was not as bright as Thomas Edison.
  • Jerry from Rio Vista, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WB25X10019
16 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The plastic kickplate which conceals the evaporator coils had broken one of the four plastic snap-in connectors, allowing the kickplate to droop down upon the right side creating an unsightly appliance appearence.
Although a fine refigerator from a performance standpoint, a drooping evaporator coil kickplate created an unsightly appearence as result of a broken snap-in plastic connector. The repair should have been fairly simple, merely requiring the removal of the old plastic kickplate by depressing the plastic connectors upon each end to release the original kickplate, followed by snapping the new kickplate into position at most, a five minute repair. However, although the replacement kickplate I received from PartSelect for $58.67 (plus shipping), does contain all four plastic snap-in connectors as required, the replacement kickplate had not been molded to rest flat upon the front refrigerator trim, properly concealing the evaporator coils (as the original kickplate mounted prior to sustaining a broken snap-in connector). However, after replacing this plastic kickplate, my refrigerator continues to suffer from a pitiful, drooping kickplate upon one end. Although PartSelect has always come through for me upon previous repair part orders, in this case the better choice would have been to dismissed my desire for retaining the factory appearence of this expensive appliance, and simply apply adhesive to the original kickplate instead.
  • Robert D. from Knoxville, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
  • Parts Used:
    WB25X10019, 218359601
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Convection oven not work in microwave.
I did some research and found the part through this website. Very easy to change the heater sheath, just took long to take everything apart. Looked at some diagrams to see exactly where the part was.
  • Kim from Saint David, ME
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Wrench set
  • Parts Used:
    WB25X10019, WB44X10046
9 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the halogen light above the stovetop burned out
the online instructions were ideal - just unscrewed the right-hand screw (the only screw) and replaced the bulb by inserting gently but firmly)...getting the old bulb out was a pain, b/c it shattered in my grasp (with little bits of glass all over the stove!), but that has nothing to do with the purchase and installation from this site - all a very good experience
  • John from ORLANDO, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WB25X10019
8 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light for cooktop burned out
Opened cover, pulled out old bulb, inserted new one, put cover back on. I was out of town when bulbs arived, my wife put it in. She said it was easy.
  • Bryan from South Beach, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WB25X10019
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
35 Reviews
4.7
Filter By Rating:
  • 5 Stars
    29
  • 4 Stars
    4
  • 3 Stars
    1
  • 2 Stars
    1
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2351821
Manufacturer Part Number: WB25X10019
Brand
Model Number
Description
Kenmore
36363672200
Microwave
Kenmore
36363672201
Microwave
Kenmore
36363673200
Microwave
Kenmore
36363674200
Microwave
Kenmore
36363674201
Microwave
Kenmore
36363679200
Microwave
Kenmore
36363679201
Microwave
Kenmore
36363692301
Microwave
Kenmore
36363692302
Microwave
Kenmore
36363693301
Microwave
Kenmore
36363693302
Microwave
Kenmore
36363694301
Microwave
Kenmore
36363694302
Microwave
Kenmore
36363699301
Microwave
Kenmore
36363699302
Microwave
Hotpoint
CSA1201RSS01
Microwave
Hotpoint
CSA1201RSS02
Microwave
Hotpoint
CSA1201RSS03
Microwave
General Electric
CSA1201RSS04
Microwave - MICROWAVE
General Electric
CSA1201RSS05
Microwave - MICROWAVE
General Electric
CVM1790SS1SS
Microwave
General Electric
CVM1790SS2SS
Microwave
General Electric
CVM1790SS3SS
Microwave - MICROWAVE
General Electric
CVM1790SS4SS
Microwave - MICROWAVE
General Electric
CVM1790SSSSC01
Microwave
General Electric
CVM1790XS1SL
Microwave - MICROWAVE
General Electric
CVM1790XS2SL
Microwave - MICROWAVE
General Electric
CVM2072SMC01
Microwave
General Electric
CVM517P2M1S1
Microwave
General Electric
CVM517P3M1D1
Microwave

Get in touch, we're here to help!

Open until 10PM EST

Contact Customer Service