Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This surface element infinite switch is designed to control the temperature of a large burner on electric ranges, cooktops, and wall ovens. It regulates the power supply to the heating element, allowing precise adjustment of heat levels for cooking. Built for reliability, this switch is intended for an 8-inch surface element and ensures consistent performance. Installation typically involves disconnecting power, accessing the control panel, and securing the new switch in place. Replacing a faulty switch restores accurate temperature control and safe operation.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Bernadette B - February 18, 2018
Verified Purchase
Back in use quickly
Quick shipping and. delivery of the part. Easy to determine the correct part and how to change it with the online diagrams. Well satisfied with the availability and price.
★★★★★
★★★★★
Mike M - February 28, 2018
Verified Purchase
Selecting part on line was easy with the blowup .
Part worked and was delivered in less time than promised. Very pleased!
★★★★★
★★★★★
Joann Y - August 28, 2018
Verified Purchase
Our stove burner switch arrived fast / works good.
easy to replace.....our stove is 100 percent back in business.....
★★★★★
★★★★★
Gregory D - October 12, 2020
Verified Purchase
Easy Repair - part fit perfectly
The large burner on our Frigidaire range was either off or on high, no controlling the temp.
Replace this switch in less than 45 minutes and works perfectly
★★★★★
★★★★★
Timothy W - January 27, 2022
Verified Purchase
Just what was ordered
The part is the exact replacement to get the job done.
★★★★★
★★★★★
DOUGLAS B - December 31, 2019
Verified Purchase
switch replacement of stove cooktop
I had a problem with it.
it did not look like the original witch gave me some concern
and the fact that there were not directions or explanation
I had to get help and with it was able to get though it.
the switch thank god works nice.
I hope if I have to buy another one, it comes with directions
rather than just throw a switch in a box
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 4 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The switch for one of the electric burners burnt
I shut POWER OFF FIRST and tested it be fore I started. I left all but one wire intact on the old switch and when the new one arrived I made sure it was the right one(it was) and then I just removed one wire at a time from old switch to the new one. After the install was complete turned power back on tested it and it worked. Good luck!
Turned off electricity to the stove top opened up the aluminum cover under the stove top with the screwdriver Took off the wires one at a time with the pliers as they were on tight and replaced them on the new part Replaced the aluminum cover Turned on electricity and voila it worked fine no sparking
John from BRIMFIELD, MA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner would consistantly go to high no matter where the dial was positioned.
First I unplugged the stove.Removed the upper control panel back (10 phillips screws). Removed the plastic dial( pulls straight off). Removed the 2 screws behind the dial that is holding the switch in the control panel. Took one wire at a time off the old switch and put them on the new switch according to each electrical spade marking. L1
... Read more, L2, H1, H2 and P. Installed the new switch in the control panel securing it with the 2 screws. Installed the dial, installed the upper back panel using the old screws. Plugged the stove back in and tested it. Note: My new switches shaft was 1/8 of an inch longer so it does put the dial a little further away from the control panel. Wife says: It's OK, don't worry about it.
Read less
Gary from Herrick, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
33 of 38 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the switches on my stove had quit exept for High. every level on the switch was high.
First I removed the 2 screws that held it in place. Then I took te screws out of the backguard cover and pulled it down so that I would get to it. Then I unplugged the wires, and replugged them on the new switch, then screwed it back in to the range, then put all the screws back in backguard cover, and plugged the range back up and p
... Read moreut it back in its place. It was real easy.
Read less
Marilyn from Lafayette, GA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
10 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cameron
December 26, 2017
My front right burner gets extremely hot and nothing in between is that the switch
Hi Cameron, Thank you for the question. Yes, you will need to replace the switch that controls the burner you are having the temperature setting issues with. Good luck with the repair!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Paul Woehle
February 27, 2018
How do i take apart the panel to get at the switch
For model number FES367AQH
Hello Paul, thank you for your question. To replace this switch, you will want to turn the power off to the unit then pull the burner knob off the switch shaft you are replacing. There will be a couple of Phillips screws behind the knob that can be removed. Then pull the unit out and remove the back access panel that covers the back of the stove. Once the back panel is removed the switch can be taken out and the wires removed from the terminals. The new switch can then be installed. I hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
November 9, 2019
The two large cooking elements on 790.41209903 both seem to have issue of control
they will keep getting hotter even when you turn down to lower setting. One isn't as bad as the other the one on front we don't use its so bad and one on back is manageable. Is this a control switch issue?
For model number 790.41209903
Hello Robert and thanks for writing.
It sounds more like your infinite switch is damaged. An infinite switch, simmerstat, energy regulator or infinite controller is a type of switch that allows the variable power output of a heating element of an electric stove. It is called "infinite" because its average output is infinitely variable rather than being limited to a few switched levels. We hope this helps. Please contact us at any time
4 people found this helpful.
Was this helpful?
Thank you for voting!
Willy
August 30, 2021
We need front right burner switch, these are the numbers on the switch 318293827 ml812455 114801
For model number FFEC3005LW1
Hello Willy, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2342883. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
James
June 19, 2019
Where can I purchase the switch for my stove?
For model number FGES3045KFC
Hi James,
Thank you for your question. You may purchase the switch from our website if you like. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
