EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

79041209903 Kenmore Cooktop - Overview

Diagrams for 79041209903

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drip Bowl - 8" – Part Number: 316048413
$14.25
In Stock
Drip Bowl - 8"
★★★★★
★★★★★
(107)
Part #316048413
This chrome drip bowl is designed for use with electric cooktops and ranges. This drip bowl is sold individually. At the widest point this part has a diameter of approximately 10 inches. It sits beneath the surface burner element. It catches any drips or spills coming from the cookware on your burner. Because the cooktop is a high-traffic area of the kitchen, these bowls often get damaged, or get so dirty they can no longer be adequately cleaned. When replacing this part you need to remove the burner element. While you have it out we recommend inspecting the terminals and the element for any corrosion, arcing, or discoloration. Any of those things could be a sign of a bigger problem, and it indicates that the element and terminal block should be replaced.
Chrome Drip Bowl - 6" – Part Number: 316048414
$13.15
In Stock
Chrome Drip Bowl - 6"
★★★★★
★★★★★
(111)
Part #316048414
The drip bowl catches grease and spills that come from cooking on your stove top. They are located under the heating elements. Drip bowls are often neglected and can become rusted and cracked. If your drip bowl is damaged, it could allow grease, food, or other spills to drip inside your range. This could become a fire hazard. This 6 inch chrome drip bowl fits most electric ranges. Before you replace your damaged drip bowl, make sure the element is turned off and cool to the touch. To replace the drip bowl, remove the element, replace the current drip bowl, and reattach the element. This part is sold individually.
Terminal Block Kit – Part Number: 5303935058
$15.20
In Stock
Terminal Block Kit
★★★★★
★★★★★
(47)
Part #5303935058
This part connects the wire harness to the surface element and is used for ranges. The kit includes interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing, and wires. If your range/oven is having symptoms such as burner not heating, heating elements not working, burning smell, or if the oven is making a buzzing noise then this could be the solution. The tools needed to replace the kit are wire strippers, a heat gun or hair dryer, and #1 square heard screw driver. Refer to the installation/instructional video for further guidance to accurately replace the element.
Surface Burner Switch – Part Number: 318293827
$80.25
In Stock
Surface Burner Switch
★★★★★
★★★★★
(6)
Part #318293827
This surface element infinite switch is designed to control the temperature of a large burner on electric ranges, cooktops, and wall ovens. It regulates the power supply to the heating element, allowing precise adjustment of heat levels for cooking. Built for reliability, this switch is intended for an 8-inch surface element and ensures consistent performance. Installation typically involves disconnecting power, accessing the control panel, and securing the new switch in place. Replacing a faulty switch restores accurate temperature control and safe operation.
Red Indicator Light Lens – Part Number: 318250801
No Longer Available
Red Indicator Light Lens
Part #318250801
This indicator light lens protects bulbs in ranges, ovens, stoves, and humidifiers. The lens keeps the bulb from getting cracked, scratched, and damaged. It is 1 inch long and 1 inch wide. If your lens is defective or broken, or the bulb is easily getting damaged, replacing the lens can be a solution. Refer to the installation instructions provided by the manufacturer for further accurate guidance. Remember to unplug your appliance from the power source before starting this project and wear gloves to ensure your hands are protected.
Burner Infinite Switch - 240V – Part Number: 318293818
$72.57
In Stock
Burner Infinite Switch - 240V
★★★★★
★★★★★
(1)
Part #318293818
This infinite control switch regulates power to a surface burner, allowing smooth and adjustable heat control. Reliable switching improves cooking accuracy and safety. Replacing a faulty switch helps restore consistent burner operation.
Support Bracket – Part Number: 318264301
$53.85
Special Order
Support Bracket
Part #318264301
Surface Element - 6" – Part Number: 316439802
$145.15
In Stock
Surface Element - 6"
Part #316439802
This genuine OEM 6-inch electric surface burner element is designed to provide reliable heat for smaller cooking areas on your range or cooktop. Featuring a durable coil design with plug-in terminals, it delivers consistent heating and supports even cooking performance. Ideal for replacing a worn or non-functioning element, it helps restore proper operation and efficiency. For safe installation, always disconnect power and handle the element with care.
BUSHING – Part Number: 318146010
$30.62
Special Order
BUSHING
Part #318146010
TERMINAL BLOCK – Part Number: 318223409
No Longer Available
TERMINAL BLOCK
Part #318223409
Surface Element - 8" – Part Number: 316442303
$173.45
Special Order
Surface Element - 8"
Part #316442303
KNOB – Part Number: 316208113
No Longer Available
KNOB
Part #316208113

Common Symptoms of the 79041209903

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Old pans/bowls were corroded
48 of 55 people found this instruction helpful.
  • John from Nisswa, MN
  • Really Easy
  • Less than 15 mins
Very easy---simply unplug the burners, remove the old pans and replace with the new ones

I was extremely pleased with the easy ordering and prompt delivery of parts that actually fit as they should!
Was this helpful?
Thank you for voting!
Burner would consistantly go to high no matter where the dial was positioned.
33 of 38 people found this instruction helpful.
  • Gary from Herrick, IL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
First I unplugged the stove.Removed the upper control panel back (10 phillips screws). Removed the plastic dial( pulls straight off). Removed the 2 screws behind the dial that is holding the switch in the control panel. Took one wire at a time off the old switch and put them on the new switch according to each electrical spade marking. L1 , L2, H1, H2 and P. Installed the new switch in the control panel securing it with the 2 screws. Installed the dial, installed the upper back panel using the old screws. Plugged the stove back in and tested it.
Note: My new switches shaft was 1/8 of an inch longer so it does put the dial a little further away from the control panel. Wife says: It's OK, don't worry about it.
Was this helpful?
Thank you for voting!
corroded terminals
22 of 25 people found this instruction helpful.
  • Gary from hollywood, FL
  • Easy
  • 15 - 30 mins
was more of a job of splicing wires together than anything else. Loved the heat shrink electrical tubing
to put over the wires for insulation. used a hair
dryer. must buy more of that amazing stuff
Was this helpful?
Thank you for voting!