227129-1-M-GE-WB04T10012 -Burner Gasket
Part Location Diagram of WB04T10012 GE Burner Gasket
See part 338 in the diagram
227129-1-S-GE-WB04T10012 -Burner Gasket 360 view
( Grid squares measure 1x1 inch )
227129-1-S-GE-WB04T10012 -Burner Gasket 227129-2-S-GE-WB04T10012 -Burner Gasket 227129-3-S-GE-WB04T10012 -Burner Gasket 227129-1-S-GE-WB04T10012 -Burner Gasket 360 view
Part Location Diagram of WB04T10012 GE Burner Gasket
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Burner Gasket WB04T10012

Rated by 2 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 12.88
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS227129
Manufacturer Part Number WB04T10012
Manufactured by GE for General Electric, Kenmore
Troubleshooting
This part works with the following products:
Range, Cooktop.
Part# WB04T10012 replaces these:
AP3668639, 874235, WB4T10012
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.6 / 5.0, 2 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Two igniters inoperable due to bad igniter switches
There are already some very good instructions for this repair on the website - I followed them as written. I recommend going through the instructions carefully first to make sure you have everything you will need and so you know what to expect. Also, if practical I recommend you do the disassembly before ordering the parts so you know exactly what you need. A couple of burner gaskets got messed up during disassembly, so I decided to replace them and ordered a couple along with the harness assembly. A couple of the igniters were difficult to disconnect from the wiring and I was afraid I was going to break some, but managed to get them off intact. The replacement harness assembly didn't look just like the old one that I removed and at first I thought I'd have to exchange it. Check the paper that comes in the box with the harness and it will show how the new one goes on. Everything went back together easily and all igniters are operating.
Read less
Other Parts Used:
Spark Igniter Switch and Harness Assembly Burner Gasket Burner Gasket
  • Robert from HARRISON CITY, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No spark at one burner
Other writers have claimed that this is a "really easy" job. They apparently had one or more of: 1. Less used appliance. 2. Never spilled anything on the cooktop 3. Much better luck. In my case, the apparently faulty igniter absolutely would not pull out. I removed it by removing the burner retaining screws and prying under the burner casting. Having done that, I cleaned the igniter and tested it again. None of the igniters worked, and I could hear arcing under the cooktop, indicating one or more of the igniter HV wires had somehow grounded. After a fruitless search for instructions on raising the cooktop, I stumbled upon an envelope glued to the back of the range that told me to remove all four burners and igniters and to release the cooktop by inserting a thin screwdriver under the front edge about 3" from each end to release the spring clips. Several of the igniters were cemented in place with caramelized sugar and required some pretty vigorous prying to dislodge. If I had this to do again on a range that had been ridden hard, I wouldproactively order a full set of gaskets (they're fragile), the HV harness (even if it doesn't leak as mine did, the igniter connectors degrade from heat exposure), a set of electrode mounting clips (none of them were much use either), and enough igniters to replace any that don't work plus at least one. I pried out the recalcitrant igniters; in retrospect I should have crushed them because of the severe risk imposed by prying of breaking either a burner casting or the cooktop -- either of which are far more expensive than another igniter.
Read less
Other Parts Used:
HARNESS HV Burner Gasket Spark Igniter Burner Gasket Burner Gasket Top Electrode Mounting Clip
  • Michael from Weatogue, CT
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
43 of 59 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Grate Foot
$12.49
  In Stock
SCREW 6-32 MCH FHT15 984
$11.32
  In Stock
Spark Igniter
$63.60
  In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
  In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
  In Stock
Produce Preserver Filter
$21.50
  In Stock
Affresh Cleaner
$19.09
  In Stock
Cooktop Cleaner
$17.74
  In Stock
Affresh Washing Machine Cleaner Tablets – 6 Count
$21.14
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS227129
Manufacturer Part Number: WB04T10012
Brand
Model Number
Description
Kenmore
91133202100
Cooktop
Kenmore
91133202101
Cooktop
Kenmore
91133202102
Cooktop
Kenmore
91133203100
Cooktop
Kenmore
91133203101
Cooktop
Kenmore
91133203102
Cooktop
Kenmore
91133204100
Cooktop
Kenmore
91133204101
Cooktop
Kenmore
91133204102
Cooktop
Kenmore
91133209100
Cooktop
Kenmore
91133209101
Cooktop
Kenmore
91133209102
Cooktop
Kenmore
91133212102
Cooktop
Kenmore
91133213102
Cooktop
Kenmore
91133214102
Cooktop
Kenmore
91133219102
Cooktop
General Electric
J2C968BEK1BB
Range - Gas
General Electric
J2C968BEK2BB
Range - Ge Range/Stove/Oven J2c968bek2bb
General Electric
J2C968BEK3BB
Range - Gas
General Electric
J2C968CEK1CC
Range - Gas
General Electric
J2C968CEK3CC
Range - Gas
General Electric
J2C968SEK1SS
Range - Gas
General Electric
J2C968SEK2SS
Range - Gas
General Electric
J2C968SEK3SS
Range - Gas
General Electric
J2C968WEK1WW
Range - Gas
General Electric
J2C968WEK2WW
Range - Ge Range/Stove/Oven J2c968wek2ww
General Electric
J2C968WEK3WW
Range - Gas
General Electric
J2S968BEK1BB
Range - Gas
General Electric
J2S968BEK2BB
Range - Gas
General Electric
J2S968BEK3BB
Range - Gas
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service
Burner Gasket
$ 12.88
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.