GE/GE_Thumb/00128486i02.gif
See part 168 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Top Electrode Mounting Clip

$7.57   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS3510420
Manufacturer Part Number WB01K10112
Manufactured by GE
Product Description

Top Electrode Mounting Clip Specifications

Sold individually.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start | Gas igniter glows | but will not light
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WB01K10112 replaces these:
AP5650822, WB01K10007, WB01X10379, WB1K10007
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Customer Repair Stories
 Average Repair Rating: 2.8 / 5.0, 4 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    No spark at one burner
    Other writers have claimed that this is a "really easy" job. They apparently had one or more of: 1. Less used appliance. 2. Never spilled anything on the cooktop 3. Much better luck. In my case, the apparently faulty igniter absolutely would not pull out. I removed it by removing the burner retaining screws and prying under the burner casting. Having done that, I cleaned the igniter and tested it again. None of the igniters worked, and I could hear arcing under the cooktop, indicating one or more of the igniter HV wires had somehow grounded. After a fruitless search for instructions on raising the cooktop, I stumbled upon an envelope glued to the back of the range that told me to remove all four burners and igniters and to release the cooktop by inserting a thin screwdriver under the front edge about 3" from each end to release the spring clips. Several of the igniters were cemented in place with caramelized sugar and required some pretty vigorous prying to dislodge. If I had this to do again on a range that had been ridden hard, I wouldproactively order a full set of gaskets (they're fragile), the HV harness (even if it doesn't leak as mine did, the igniter connectors degrade from heat exposure), a set of electrode mounting clips (none of them were much use either), and enough igniters to replace any that don't work plus at least one. I pried out the recalcitrant igniters; in retrospect I should have crushed them because of the severe risk imposed by prying of breaking either a burner casting or the cooktop -- either of which are far more expensive than another igniter.
    43 of 58 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Igniter no longer worked
    remove all loose components on range top (grates, caps, disbursement / diffuser heads. Take a T-15 screw driver and unscrew each of the three screws on each burner. Have a large flat headed screwdriver ready. Lift up on the front lid of the range, it should life about 1/4 inch. There are two clips that hold it down, about 6 - 8 inches in from either side. Press then towards the back (away from you) one at a time, while lifting on the lid.. it should pop free. WARNING: if you did not remove the torx screws first, be careful are you will now bend the gas lines running to the burner. Once loose, remove the old clip from the igniter, so that it lifts free. unplug the igniter from the electrical cable (pulls out from bottom). attach new clip to new igniter and re-attach electrical line to new igniter. close lid and re-attach all torx screws. Reassemble range top and you are complete.
    • BRAD from Halethorpe, MD
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Pliers, Screw drivers
    • Parts Used:
      WB13K10021, WB01K10112
    11 of 20 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    some of electrodes not working at times,found were bad,wires had some insulation missing, clips looked burnt,found all new parts replaced
    the electrodes on this model have to be removed before you can raise cooktop, once cooktop is raised remove wire from burner bracket, use needle nose pliers to squeeze bottom of clip,remove &replace with new parts.
    • Dana from LEEDS, AL
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      More than 2 hours
    • Tools:
      Pliers
    • Parts Used:
      WB01K10112
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Water got into the spark igniter switch and caught fire
    watched a video, then took it apart and replaced parts
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS3510420
      Manufacturer Part Number: WB01K10112
      Brand
      Model Number
      Description
      General Electric
      147210
      Range
      General Electric
      147211
      Range
      General Electric
      147212
      Range
      General Electric
      147213
      Range
      General Electric
      147260
      Range
      General Electric
      147261
      Range
      General Electric
      147262
      Range
      General Electric
      147263
      Range
      Kenmore
      36272181890
      Range
      Kenmore
      36272181891
      Range
      Kenmore
      36272188890
      Range
      Kenmore
      36272188891
      Range
      Kenmore
      36272191890
      Range
      Kenmore
      36272191891
      Range
      Kenmore
      36272191892
      Range
      Kenmore
      36272198890
      Range
      Kenmore
      36272198891
      Range
      Kenmore
      36272198892
      Range
      Kenmore
      36272201890
      Range
      Kenmore
      36272201891
      Range
      Kenmore
      36272201892
      Range
      Kenmore
      36272201893
      Range
      Kenmore
      36272205891
      Range
      Kenmore
      36272205892
      Range
      Kenmore
      36272205893
      Range
      Kenmore
      36272206891
      Range
      Kenmore
      36272206892
      Range
      Kenmore
      36272206893
      Range
      Kenmore
      36272208891
      Range
      Kenmore
      36272208892
      Range

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service