Part Location Diagram of W11581579 Whirlpool STUD-SHELF
See part 21 in the diagram
Replacing your Whirlpool Refrigerator STUD-SHELF
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

STUD-SHELF W11581579

★★★★★
★★★★★
7 Reviews

Rated by 18 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 28.81
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS16730711
Manufacturer Part Number W11581579
Manufactured by Whirlpool
Product Description

STUD-SHELF Specifications

This is a 12 piece kit.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Whirlpool Refrigerator STUD-SHELF

Replacing your Whirlpool Refrigerator STUD-SHELF
Troubleshooting
This part works with the following products:
Refrigerator, Freezer.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Roper.
Part# W11581579 replaces these:
1106982, 1118109, 4388540, 946355, 946356
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
4.4
Filter By Rating:
  • 5 Stars
    6
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.9 / 5.0, 18 reviews. What's this?
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing installation instruction that matched.
Shelf studs broke several years ago and I had a problem locating them. Finally wised up and checked Part Direct and found them, ordered the kit w/ 12 pieces. Then quickly watched the installation video. Took less than 30 minutes to replace two different studs. Wife is very happy.
Simply took broken pieces of old stud out and replaced with the new ones. Used pliers to adjust them. Replace a freezer stud and a fridge stud.
  • Karl from BIRDSBORO, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken shelf supports
Took just a few moments to install. The parts fit like a glove,
  • Bob from Las Vegas, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Nonr
Replaced missing stud.
  • Gaynell P from Spring, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Shelves and bin were missing
My freezer compartment was difficult to use efficiently with the two shelves and the bin missing. I was thrilled to find these replacement parts ... now it's back to like new.
Other Parts Used:
SHELF-WIRE STUD-SHELF Freezer Bin
  • Dana from Cary, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
16 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lost shelf support bracket
Ordered shelf support stud kit. Product was promptly delivered, and contained the parts as shown on website. Took longer to open the package than to replace the missing shelf support bracket. No problems. Would order from them again.
  • DAVID from LAFAYETTE, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken bracket
Replaced broken shelf bracket
  • Raymond from Victorville, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pieces were broken making the shelves unuseable.
Took the old shelf and removed the endcaps and snapped the new ones on.

The support stud kit could have had better directions. Was unsure if the whole piece came out of the wall of the freezer or not. A little confusing.
Other Parts Used:
STUD-SHELF Door Shelf End Cap Kit Shelf Retainer End Cap
  • Bonny from Akron, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
part of a freezer support bracket was missing
I wasn't sure the kit included the part I needed from the pictures, but it did. The part slipped over the flat plastic bracket attached to the right freezer wall and the shelf fit over it. No tools required.
  • peter from saint augustine, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer shelf falling off
One of the front studs was broken off. I had to use pliers to pull it out (kind of tight). Then I inserted the back and front holders and layed the shelf back in. Total time...10 min
  • Carl from Crete, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice maker quit working
First, I turned off the water supply to the refrigerator. I then used the nutdriver to remove the cardboard covering over the water valves. I removed the two screws and three water lines from the valve with the adjustable wrench and I disconnected the electrical wires from the valves. And then reversed the process and installed the new valve. also, wanted to note that the repair parts came very promptly.
Other Parts Used:
STUD-SHELF Ice Maker and Water Dispenser Dual Inlet Valve
  • William from Trafford, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

Be the first to ask our experts a question about this part!

Model Cross Reference
This part works with the following models:
PartSelect Number: PS16730711
Manufacturer Part Number: W11581579
Brand
Model Number
Description
Kenmore
10647021790
Refrigerator
Kenmore
10647021791
Refrigerator
Kenmore
10647022790
Refrigerator
Kenmore
10647022791
Refrigerator
Kenmore
10647028790
Refrigerator
Kenmore
10647028791
Refrigerator
Kenmore
10648062890
Refrigerator
Kenmore
10648067890
Refrigerator
Kenmore
10648262890
Refrigerator
Kenmore
10648267890
Refrigerator
Kenmore
10648562890
Refrigerator
Kenmore
10648567890
Refrigerator
Kenmore
10650262990
Refrigerator
Kenmore
10650264990
Refrigerator
Kenmore
10650267990
Refrigerator
Kenmore
10650269990
Refrigerator
Kenmore
10651051990
Refrigerator
Kenmore
10656071790
Refrigerator
Kenmore
10656071791
Refrigerator
Kenmore
10656072790
Refrigerator
Kenmore
10656072791
Refrigerator
Kenmore
10656075790
Refrigerator
Kenmore
10656075791
Refrigerator
Kenmore
10656077790
Refrigerator
Kenmore
10656077791
Refrigerator
Kenmore
10657021790
Refrigerator
Kenmore
10657021791
Refrigerator
Kenmore
10657022790
Refrigerator
Kenmore
10657022791
Refrigerator
Kenmore
10657028790
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service