This part is a halogen lamp, but it may also be known as a light bulb and is an important part for your range. This model is 75 watts and measures to be roughly 3 inches high, and 2 inches wide. The purpose of this piece is to be screwed into the range vent hood. Once activated, this bulb will light up the surface below your range hood, which is usually the stove top and surrounding counter area. This bulb is a genuine OEM part sourced directly from the manufacturer, and is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range Hood.
This part works with the following products:
Dacor.
Part# DE81-08661A replaces these:
92348
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
4.7
Filter By Rating:
5 Stars
6
4 Stars
0
3 Stars
1
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
CARLTON M - January 30, 2023
Verified Purchase
Perfect
Perfect fit.
★★★★★
★★★★★
Carol D - February 19, 2019
Verified Purchase
Fit and works perfectly.
The previous bulb lasted 15 years, so it was important to us to replace it with a genuine Dacor part. Perfect fit, and light quality the same as before. Very satisfied with our purchase.
★★★★★
★★★★★
Lannon S - December 21, 2018
Verified Purchase
Halogen Lamp - 75W replacement
After six weeks wait/(backordered part) part was received.
Replacing this halogen lamp in my Dacor range hood has proved to be extremely
difficult because the old lamp is stuck very tightly. To date, I have been unable to remove
it, and therefore I have not yet been able to install the new replacement part.
Any suggestions for replacing this part would be appreciated. It is my understanding
that these lamps can be difficult to remove after years of use because the vapors rising
from the cooktop cause it to stick stubbornly.
★★★★★
★★★★★
Michael S - December 21, 2018
Verified Purchase
part as expected
Part as expected and delivery was quick.
★★★★★
★★★★★
Barry M - November 22, 2018
Verified Purchase
European base chandler lights
The right product in good time.
★★★★★
★★★★★
ANNETTE F - October 29, 2018
Verified Purchase
Easy to order
I love this site as it is so simple to find the part I need and receive it in a timely manner.
★★★★★
★★★★★
Christine A - October 3, 2018
Verified Purchase
Fast, quick and easy
The light bulbs arrived quickly and undamaged. My lights are working again!!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
replacing halogen bulbs in a Dacor exhaust vent - problem, the bulbs are flush with vent housing surface
In order to grasp the bulbs, which are flush against the vent surface, you need the 'Suction Cap' tool. However, the bulbs are solid tight in their sockets from years of heat over the stove. Removing the vent filter allowed access with a small plier to the base of the bulb allowing me to loosen the bulb. Don't have a suction cap? Wrap du
... Read morect tape around your two fore-fingers, press tightly against the face of the bulb and twist counter-clock wise. I recommend apply some Vaseline jell to the new bulb thread to keep the fitting from freezing.