Models > DH3006

DH3006 Dacor Range Hood - Overview

Sections of the DH3006

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
DISCONTINUED – Part Number: DE81-08661A
DISCONTINUED
★★★★★
★★★★★
(6)
PartSelect #: PS16631763
Manufacturer #: DE81-08661A
This part is a halogen lamp, but it may also be known as a light bulb and is an important part for your range. This model is 75 watts and measures to be roughly 3 inches high, and 2 inches wide. The p...
$65.05
  In Stock
Order within the next 5 hrs and your part ships today!
SVC-SCREW WAFER HD;83534,#8 X 3/8,DH3006 – Part Number: DE81-02250A
SVC-SCREW WAFER HD;83534,#8 X 3/8,DH3006
PartSelect #: PS16627282
Manufacturer #: DE81-02250A
$4.40
  In Stock
Order within the next 5 hrs and your part ships today!
SVC-SCREW PHIL WAFER;83263,#8X3/8,DCT305 – Part Number: DE81-02331A
SVC-SCREW PHIL WAFER;83263,#8X3/8,DCT305
PartSelect #: PS16627342
Manufacturer #: DE81-02331A
$4.04
  In Stock
Order within the next 5 hrs and your part ships today!
SVC-TRIM LAMP MRH 105;62352,DH3006 – Part Number: DE81-08258A
SVC-TRIM LAMP MRH 105;62352,DH3006
PartSelect #: PS16631517
Manufacturer #: DE81-08258A
$82.99
  Special Order
SVC-FILTER 9 5 X 12;101617,DH3006 – Part Number: DE81-08660A
SVC-FILTER 9 5 X 12;101617,DH3006
PartSelect #: PS16631762
Manufacturer #: DE81-08660A
$37.67
  In Stock
Order within the next 5 hrs and your part ships today!
SVC-KNOB SELCO DBK291 006;83424,DH3006 – Part Number: DE81-05998A
SVC-KNOB SELCO DBK291 006;83424,DH3006
PartSelect #: PS16629955
Manufacturer #: DE81-05998A
$9.82
  In Stock
Order within the next 5 hrs and your part ships today!
SVC-ASY LAMP DIMMER;72756,DH3006 – Part Number: DE81-09033A
SVC-ASY LAMP DIMMER;72756,DH3006
PartSelect #: PS16631992
Manufacturer #: DE81-09033A
$77.01
  In Stock
Order within the next 5 hrs and your part ships today!
SVC-LIGHT DIMMER CAP;36511,DH3006 – Part Number: DE81-08662A
SVC-LIGHT DIMMER CAP;36511,DH3006
PartSelect #: PS16631764
Manufacturer #: DE81-08662A
$8.88
  On Order
SVC-LAMP HOLDER MEPLA;101624,DHD30M967WM – Part Number: DE81-07766A
SVC-LAMP HOLDER MEPLA;101624,DHD30M967WM
PartSelect #: PS16631223
Manufacturer #: DE81-07766A
$16.95
  Special Order
SVC-CAP BLK ICON FAN;36100,DH3006 – Part Number: DE81-08658A
SVC-CAP BLK ICON FAN;36100,DH3006
PartSelect #: PS16631760
Manufacturer #: DE81-08658A
$8.71
  In Stock
Order within the next 5 hrs and your part ships today!
SLIDE, TEMP CONTROL – Part Number: 102721
SLIDE, TEMP CONTROL
PartSelect #: PS4255530
Manufacturer #: 102721
  No Longer Available
FOAM TAPE, URETHANE – Part Number: 81132
FOAM TAPE, URETHANE
PartSelect #: PS4270183
Manufacturer #: 81132
  No Longer Available

Questions And Answers for DH3006

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Two striped out screw heads
Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.
Parts Used:
SVC-SCREW PHIL WAFER;83263,#8X3/8,DCT305
  • David from MCKINNEY, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The rheostat controlled light failed
As I removed the broken part, I marked each wire indicating the color of the wire nut I would use for the installation of the replacement switch. With the new part, I connected the 2 yellow marked wires to the yellow supply wire. (It was "hot" - surprise!!) I connected 1 orange marked wire to one of the 2 corresponding orange wire. I then tested the switch and realized I had connected the light wire to the vent supply wire. I switched to the light supply wire, connected the fan control correctly. Life is good in my kitchen: cool and bright!
Parts Used:
SVC-ASY LAMP DIMMER;72756,DH3006
  • Barbara from HOUSTON, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!