My Orders
DH3006 Dacor Range Hood - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The rheostat controlled light failed
2 of 2 people
found this instruction helpful.
-
Barbara from HOUSTON, TX
- Really Easy
- 30 - 60 mins
-
Screw drivers
As I removed the broken part, I marked each wire indicating the color of the wire nut I would use for the installation of the replacement switch. With the new part, I connected the 2 yellow marked wires to the yellow supply wire. (It was "hot" - surprise!!) I connected 1 orange marked wire to one of the 2 corresponding orange wire. I then
... Read more
tested the switch and realized I had connected the light wire to the vent supply wire. I switched to the light supply wire, connected the fan control correctly. Life is good in my kitchen: cool and bright!
Read less
Was this helpful?
Thank you for voting!
Two striped out screw heads
3 of 10 people
found this instruction helpful.
-
David from MCKINNEY, TX
- Easy
- Less than 15 mins
Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.
Was this helpful?
Thank you for voting!