Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dishwasher would stop during the cycle with nE code
This was my first time repairing a dishwasher. I watched YouTube on how to remove the dishwasher from the cabinet. Afterwards, I removed the bottom of the dishwasher while it was laying flat to get to the motor and micro switch. The only difficulty I had was getting to the motor which required taking the bottom section off of the dishwash
... Read moreer. I could not get an appliance repair company to work on an LG dishwasher. My only option was to repair the dishwasher or bought a new dishwasher. Therefore, my wife and I decided to , make an attempt to repair this one with a backup plan of buying a new one. Luckily, we were able to fix this one within two hours.
This was a $999 dishwasher. We saved the cost of a new dishwasher by taking the time to fix this one.
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tony
July 30, 2021
Hello, the ne code appears at the end of the cycle. I found through youtube tutorials that the vario motor could be bad so i replace it. The ne code still appears at the end of the cycle, so after watching more youtube tutorials i found out that it could be the micro switch. I am trying to order that particular part, but i am unable to find it available. Can you please guide me to how i can purchase this part? Tony
For model number LDS5040ST
Hello Tony, Thank you for your question. The NE error code is letting you know that the micro switch's signal is not reaching the electronic control board. The switch you are looking for is the one that reports the motor's position to the electronic control board. The part number listed under your model number for the micro switch is PS16219431. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Adam
November 19, 2023
What is the correct diverter motor and micro switch for error code NE on this model LDP6810BD.ABDNESA?
For model number LDP6810BD.ABDNESA
Hi Adam, thank you for contacting us. The parts you are looking for are the microswitch, part number PS16219431, and the diverter motor, part number PS3579323. Glad to be of assistance!
Hello Roger, thank you for your inquiry. An LE error code on the washer's display indicates that the motor is locked, possibly due to a heavy wash load. Press the POWER button to turn the dishwasher off. Turn the circuit breaker to the dishwasher OFF and wait 10 seconds. Turn the circuit breaker to the dishwasher back ON. Press the POWER button to turn the dishwasher ON, and start a new cycle. We hope this is of some help to you.
Was this helpful?
Thank you for voting!
Kam
December 7, 2023
ldp6797st LG dishwasher: ebf64375202 microswitch- where is this part located on the dishwasher? im blind and i cant find it on the dishwasher
For model number ldp6797st
Hi Kam, thank you for reaching out. Based on our research, the micro switch you have mentioned is located in the sump assembly. We hope this information helps!
Was this helpful?
Thank you for voting!
William
June 30, 2021
Error ne. Watched video on utube. Possible fix would be to replace item(s) mo26, mo27, m028. Any suggestions
For model number LDS5540ST
Hi William,
Thank you for your question. The NE error code is letting you know that the micro switch's signal is not reaching the electronic control board. The switch you are looking for is the one that reports the motor's position to the electronic control board. The part number listed under your model number for the micro switch is PS16219431. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! Good luck with the repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
