EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

14673 (ASTESEU) LG Dishwasher - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dishwasher Roller Assembly – Part Number: 4581DD3003C
$15.00
In Stock
Dishwasher Roller Assembly
★★★★★
★★★★★
(16)
Part #4581DD3003C
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the track in your dishwasher, makes noises, the door will not close, or the dishes are not getting clean, then it is best to replace it for more security. A flat blade screw driver is the only tool needed for this installation. Open the lower dishwasher rack and remove retaining tabs from both ends of the rack and slide it out. Locate the older roll assembly, remove it and replace the rollers. Remember to put the tabs on each side back before sliding it back in. Make sure the dishwasher is off before starting this installation project.
Gasket – Part Number: 3920DD3005H
$65.73
In Stock
Gasket
★★★★★
★★★★★
(14)
Part #3920DD3005H
This dishwasher door gasket is designed to form a secure, watertight seal around the tub, preventing leaks and enhancing overall wash efficiency. Constructed from flexible, heat-resistant black rubber, it withstands temperatures up to 150°F and resists wear over time. By maintaining a tight seal, the gasket ensures that water and steam remain contained within the dishwasher during operation, contributing to more effective cleaning cycles and reduced energy waste. A worn or damaged gasket can lead to water pooling, inefficient washing, and potential damage to surrounding cabinetry. Replacing it restores proper function and helps extend the appliance’s lifespan. Installation is straightforward, requiring the gasket to be pressed into the door channel for a snug fit.
Diverter Motor - 120V 60Hz – Part Number: 4681ED3001D
$53.20
In Stock
Diverter Motor - 120V 60Hz
★★★★★
★★★★★
(7)
Part #4681ED3001D
This diverter motor, or stepper motor, controls the movement of the spray arms in your dishwasher. It directs water between the drain pump and the spray arms by turning a check valve inside the pump, managing the flow of water to these spray arms. This diverter motor runs on 120 volts and 60 Hz. When this motor fails, the dishwasher will not wash or drain properly. Please keep in mind that this genuine OEM replacement part is sold separately from the spray arms.
Hose Drain Assembly – Part Number: AEM74333104
$66.77
In Stock
Hose Drain Assembly
★★★★★
★★★★★
(4)
Part #AEM74333104
This LG drain hose assembly is a genuine OEM replacement that is compatible with various LG washers. The assembly includes the hose and plastic connectors. The flexible rubber hose transports used water from the washer tub out into a dedicated drainage system such as a laundry sink or standpipe. The drain hose may become clogged, dislodged, or damaged by loose items like coins in the laundry or by hard impacts from outside. If the hose is faulty, you will likely notice standing water in the washer tub after a cycle, mold growth, leaking, or water overflow. It is recommended to replace the drain hose promptly if it is faulty to ensure the proper functioning of your washer.
Dishwasher Water Inlet Valve – Part Number: 5221DD1001E
$96.17
In Stock
Dishwasher Water Inlet Valve
★★★★★
★★★★★
(2)
Part #5221DD1001E
This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your dishwasher continues to fill after it is full, or if it fills slowly, you may need to replace this valve. Another indication that your valve is damaged and will need to be replaced, is if you notice it is leaking when the dishwasher fills up. Before you begin this repair, be sure to disconnect the water and power sources from your washer. This part is sold individually and is an authentic OEM part.
Bushing – Part Number: 4830ED4001B
$15.00
In Stock
Bushing
Part #4830ED4001B
Circulation Pump – Part Number: ABT72989206
$300.96
In Stock
Circulation Pump
★★★★★
★★★★★
(2)
Part #ABT72989206
This pump casing assembly is compatible with various models of LG dishwashers. This assembly contains various components of the dishwasher pump. The pump is responsible for circulating water through the dishwasher during different cycles, such as washing and draining. The components included are the motor which provides the power that moves the water; the impeller, which helps to expel the water through the spray arms; the seals, which help to prevent water from leaking out, and the inlet and outlet ports which are responsible for pulling water from the tub and directing it outwards as needed; and finally, the outer housing. If any of these components fail, your dishwasher will have difficulties draining, dishes will not be cleaned thoroughly, and there will be grinding and buzzing noises during use.
SWITCH,MICRO – Part Number: EBF64375202
$29.47
In Stock
SWITCH,MICRO
Part #EBF64375202
This micro switch detects specific positions or actions within the appliance and signals components to activate or stop accordingly. Designed for precise response, it is replaced when functions fail to trigger or operate inconsistently.
GASKET – Part Number: MDS65210402
$65.73
Special Order
GASKET
Part #MDS65210402
RACK – Part Number: MGR62762701
$29.47
In Stock
RACK
Part #MGR62762701
This rack is a replacement support component designed to hold cookware or items securely at adjustable heights. It promotes safe handling and space efficiency and is commonly replaced when bent, rusted, or unstable.
RACK – Part Number: MGR62482102
$29.47
In Stock
Mesh Filter Assembly – Part Number: ADQ74693701
$50.95
Special Order
Mesh Filter Assembly
★★★★★
★★★★★
(1)
Part #ADQ74693701
This mesh filter assembly is a genuine LG replacement part designed for select dishwasher models. Its fine mesh screen captures food particles and debris, preventing clogs in the drain pump and spray arms. By maintaining clear water flow, it helps improve cleaning performance and ensures efficient operation. Made from durable materials, this filter is built to withstand regular use. Installation is simple—remove the old filter and position the new one securely in place.

Exact Part matches for your search term

Fcc label – Part Number: 14673
No Longer Available
Fcc label
This part number matches the current model number 14673
Part #14673
HUB-PULLEY – Part Number: 14673
$81.45
Special Order
HUB-PULLEY
This part number matches the current model number 14673
Part #14673
HUB-PULLEY – Part Number: 14674
No Longer Available
HUB-PULLEY
This part number matches the current model number 14673
Part #14674

Common Symptoms of the 14673

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Loud noise when running - the infamous bad drive motor
34 of 39 people found this instruction helpful.
  • Mark from TEHACHAPI, CA
  • Very Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Replacing this pump is pretty easy. Disconnect the power and drain hose, and pull your dishwasher out from the counter. Lay it on its side on a towel. There WILL be spillage. Disconnecting the pump is simple. There are a couple hoses, one single wire connection (the thermistor) and one multi-wire plug. The pump is held in place by a pair of thick rubber holders which can be pulled off by hand. That's it!

After removing the pump, I disassembled it to find out why these fail so soon. It's a very poor design. I found that the nose of the electric motor, where the bearings are located, sits in a plastic cup formed by the top of the pump body. Any leakage from the pump around the motor shaft will be held in place against the motor bearing. It has no place to go. This causes rusting of the bearing. I expect I'll be replacing this one in a few years. :(

But kudos to PartsSelect for getting the right pump assembly for me, after getting the wrong one from another supplier!
Was this helpful?
Thank you for voting!
Dishwasher leaking; got AE error almost every other wash
12 of 20 people found this instruction helpful.
  • Bruce from Katy, TX
  • Really Easy
  • 30 - 60 mins
The inside gasket deteriorates over time - However replacement is easy. the main thing you have to remember is after you remove the old gasket, install the new one starting at the middle top of the tub and work your way down both sides. Also, don't push the gasket all the way in...only enough to hold in place. When you close the door the gasket will form a better seal around the door.
Was this helpful?
Thank you for voting!
Second roller in on the left side was missing don't ask my how, pulling the bottom rack out the rack would dip down i had to lift it up to pull it the rest of the way out.
9 of 17 people found this instruction helpful.
  • Lenny from KIRTLAND, OH
  • Very Easy
  • Less than 15 mins
Ordered the roller from Parts Select, slid the roller over the little spindle sticking out of the bottom rack and snapped it in place. Job done in less than one minute.
Was this helpful?
Thank you for voting!