Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Amy
November 28, 2017
My washer won’t turn on. There’s no blown fuse & it’s plugged in.The knob on right, which selects hot, warm & cold cycles, seems to be stripped of it’s ability to catch on whatever it needs to catch on, it can spin loosely & when i push it in or pull it out, it does nothing. The screws holding the cover on are oxidized/corroded & difficult to unscrew. What do you think is the problem with this machine; how can i fix it? I’m in a rental house & the landlord will not replace it, nor fix it. I can’t afford to buy a new washer.
For model number WHDSR209DAWW and Serial: SL158685G
Hi Amy,
Thank you for your question. It sounds like you will either need to replace your entire knob assembly or replace your timer. If it is the shaft that the knobs sits on that is broken, then it is your timer you will need to replace. If it is just your knob spinning, you will need to replace the knob assembly. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
