Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This is the electronic clock timer mechanism only. The overlay or touch pad is NOT included. To get the overlay, please use the model# of your appliance to search.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Stephen H - November 24, 2024
Verified Purchase
Easy Oven electronic clock Assembly replacement
The Oven electronic clock assembly was an exact replacement for our older Frigidaire oven.
★★★★★
★★★★★
Tammy D - March 23, 2023
Verified Purchase
Easy Switchout Repair
This was an East repair. Videos that assist in guiding the repair help a great deal.
★★★★★
★★★★★
MARK C - December 15, 2020
Verified Purchase
Correct part first time
Call support helped to identify correct part needed. Arrived 1 day early. Install was fast and easy. Thanks. Will recommend you to everyone
★★★★★
★★★★★
Thomas B - August 11, 2021
Verified Purchase
Easy to replace - saved $170
With the video guide for installation I did it myself and saved the $170 the appliance repair company wanted. From start to finish, about 25 minutes. Works as promised.
★★★★★
★★★★★
Lily V - November 9, 2020
Verified Purchase
Easy repair. Took me 10 minutes.
The part was brand new,good condition.
★★★★★
★★★★★
Alan D. J - May 29, 2021
Verified Purchase
Couldn't have been easier
Don't hire a repair guy to come out and do this.
If you have a screwdriver and half a brain, you can do this repair yourself. Part is $115 dollars... a repairman would charge you $300 for the part and $100 labor to instill it.
★★★★★
★★★★★
William B - February 1, 2018
Verified Purchase
Easy to fix
Easy an works great
★★★★★
★★★★★
Thomas B - July 27, 2018
Verified Purchase
Worked Great
It was very easy to replace!
★★★★★
★★★★★
Allen E - May 21, 2019
Verified Purchase
GREAT to have oven AGAIN
We bought a house and assumed the appliances were all good. First time baking noticed oven wasn’t following temperature (it went WAY high). So did some online research, everything pointed to EOC so I ordered it. Installed it really easy, parts fit EXCELLENT & were EXCELLENT quality. DEFINITELY will buy from again, if I need to for something other. REALLY FAST on shipping, also
★★★★★
★★★★★
Christa K - December 19, 2018
Verified Purchase
Just what we needed!
Although the part was put on back-order, when it finally came, it was in perfect condition and worked perfect!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 30 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven was not working
I changed the clock , it was very easy ! I changed wire for wire then put the clock in . Simple task but, make sure power if off. You can take a picture of wires with your phone, if you like .
I have to say Parts Select is one of the best companies that I've ever done business with . They help troubleshoot the problem send you
... Read morethe parts on time and make refunds as easy as 123.
I am not easy to please because, of so much incompetence where ever you go these days. That's the reason I took the time to write all this .These folks are the real deal. Kenny G . In Louisiana !
Read less
kenneth from GRETNA, LA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The oven and broiler element would not heat.
The elements tested good. Figured it was the electronic clock timer/control using the sites repair guidance and ordered the part. The remove and replace was very easy. Pulled the stove out, removed back panel and removal and replacement of the part is pretty basic. Be sure and unplug the appliance first. Everything works fine now.
donald from SACRAMENTO, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven wouldn't bake or broil. Top burners worked fine.
1. turn off power to stove and pull out from wall. 2. Remove 4 screws holding rear upper panel in place, pull panel up and out to remove. 3. Remove 4 screws holding clock timer to back of raised panel. Let it dangle from attached wires. Gently peel overlay from face of old timer(if reusing). or peel off adhesive backing from new overlay a
... Read morend apply to face new clock timer. 4. Attach new timer to back of stove raised panel where the old one was, using the 4 screws originally removed. 5. remove each wire one at a time from old clock timer and plug into the corresponding terminal on the new one. (careful they are tight). 6. Set upper rear panel in place and fasten using the 4 screws originally removed. 7. Slide stove into place and restore power. 8. Reward yourself with fresh baked cookies!
The repair was very easy take the back off, pull the wires from the old and put on the new that's it. Carefully peel the old face plate off and stick on the new one your done out the cover back on and cook.
Mark from LE ROY, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control shorted out
Removed back panel made note of all connections, remove 4corner screws and connections and re-install in reverse order.
David from ELLIJAY, GA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No problems.
I followed the instructions I remembered from the video when I ordered the clock timer. Had no problem at all. I am enjoying my oven again.
silas from CARTHAGE, MS
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven and broiler didn't work.
I followed the video instruction. It was super easy and quick. It took no more than 10 minutes.
Dennis from NEW PRT RCHY, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Clock/Timer
The Clock/Timer had no juice coming thru for the stove to come on for cooking.So once I receive my parts to fix it, I had no problem getting the job done.
Linda from Fort Washington, MD
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Wrench set
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
clock/timer didnt work
unplugged appliance.removed back panel.removed old clock/timer by backing out 4 screws holding it in place.took of each wire one at a time as not to confuseplacement on new part. peeled front plate of old timer very carefully, placed on new part.put back in place.very easy, less than half hour.if I can do,anybody can
jack from chambersburg, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
7 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The LR surface burner and the oven were inoperable.
After receiving the parts in only two days, I first turned off the circuit breaker. Then I pulled the stove out from the wall. I used the nutdriver to remove the upper rear panel. Using the screw driver I removed the defective clock timer and used a pocket knife to carefully remove the clock timer face. I positioned the clock timer fa
... Read morece on the new clock timer and installed same in the stove panel. (I had made a list of the wires and their colors to insure the proper placement on the new clock timer). Installed the four screws and on to the burner switch. Two front panel screws removed and the defective burner switch was out. Installed the new burner switch, connected the wires, installed the two screws, pushed on the knob and I was ready to go. Re-installed the reap panel, pushed stove back in, turned on the circuit breaker and tested the burner and oven. All worked correctly. A very easy repair!
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
February 10, 2020
Does this part cross reference to part number 316455500
For model number FEF326FSA
Hello Bill, Thank you for the question. Very sorry but the 316455500 is not coming up a valid number. Checking the model number provided the Clock listed is PartSelect Number PS12728848. We hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Dale
December 27, 2021
Good day. My mother's oven does not seem to come up to temperature or maintain temperature. The TC seems to read fine. I hear the relay click on/off during the cycle, she just cannot bake a cake or cook a roast. It takes upwards of 10-15 min to come to temperature (say 375), but will not maintain afterwards. Any assistance would be greatly appreciated. I'm leaning towards the control board
For model number CFEF3007
Hello Dale, Thank you for the question. We suggest testing the Oven Temperature Sensor. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jamie
February 25, 2022
Will this fix F10 error?
For model number Model : LFEF3011LWD with Serial: VF31758085
Hello Jamie, Thank you for your inquiry. The F10 error indicates that the control detects a runaway temperature in the oven. If the oven is overheating, this can be caused by a stuck relay or contact on the oven electronic control board, or could indicate a failed oven sensor. We would recommend checking the oven temperature sensor with a multimeter to see if it is faulty, and check the wiring going from the sensor to the control board for any visible damage. If the sensor tests good for continuity, then we would recommend replacing the control board. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hi Krystal, thank you for the question. The F11 error code is a short-key error. It means when a key on the keypad has been detected as being pressed in for a long time, the F11 error is reported, and all oven commands are terminated. First, simply press the cancel key to clear the code. The error may have been caused by just holding down a key too long by mistake. If the error persists, you will need to replace the keypad, part number PS12728848, or the keyboard membrane, part number PS2581726. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Hi Stanley, thank you for reaching out. Yes, part number PS12728848, is the replacement number of the manufacturer part number 3164555. We hope this information is useful!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jaden
January 12, 2024
I changed the control panel but now it is throwing a F30 code and I have assured everything is connected correctly. How do I fix this? Everything worked on the stove before the control panel was broken!
For model number FFEF3043LSD
Hi Jaden, thank you for getting in touch. Based on our research, the F30 error code indicates that there is a problem with the oven temperature sensor, part number PS11731754. You may need to replace it to fix the issue. We hope this solves your problem!
Hello my oven wont heat at all. Everything seems like its fine until there is no heat at all. And I replaced the bake element already and still its the same. Is the next step the oven clock assembly? I do not have a multimeter to check things as well. and what exact is the overlay stuff that it says do not come with the clock assembly? Is that something i can use that i already have or something I have to purchase as welll? Is there something else it maybe that I should change first? Thank you for your time in advance
For model number FEF336ECE
Hello Jennifer, Thank you for contacting us. The overlay is the plastic label that goes over the control board that shows the buttons, you may be able to peel it off of the original control board and place it on the new one. We would recommend the temperature sensor/probe first as that is what tells the control board when to turn the elements on. We hope this helps you.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Range","title":"Range","url":"/Range-Parts.htm"},{"position":2,"name":"Circuit Board or Touch Pad","title":"Circuit Board or Touch Pad","url":"/Range-Circuit-Boards-and-Touch-Pads.htm"},{"position":3,"name":"5304518660","title":"5304518660","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
