Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Johnny
July 1, 2021
I need the hot inlet water valve for this type of washer.
For model number MMHW8630HW
Hello Johnny, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12711563. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Deb
July 26, 2021
I'm needing a water inlet valve for this washing machine.
For model number WFW6620HC0
Hello Deb, Thank you for contacting us. We have researched the model you have provided and have found there are two valve for this model, Part #: PS12711564 and Part #: PS12711563. We hope this helps!
Are the hot and cold water inlet valves the same part which are different colors and is it necessary to change the pressure sensor at the same time the water inlet valves are changed (hot and cold)? Please advise
For model number MHW6630HW1
Hello Deane, Thank you for your inquiry. Researching the model number that you have provided, there are two separate water inlet valves. The cold water inlet valve is part# PS12711564 and the hot water inlet valve is PS12711563. It should not be necessary to change the pressure switch at the same time if it is working correct, but you can also test the switch with a multimeter as well. We hope this helps.
Looking for the hot water inlet valve for this model. Someone yanked on it while moving the machine and the plastic tabs that hold it in place cracked. the valve itself is working, not leaking. Had to MacGyver it with some string to hold it in place but eventually would like to replace it and install securely.
What part(s) do I need? and does the wiring harness simply slip into the new part?
For model number wfw560chw4
Hello Lesley, thank you for your question. Yes, that is correct. The new Hot water valve does have the mounting plate, so you would just unplug the existing one and plug it in. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
