Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Warren
March 28, 2023
When oven is used on convection bake, the temperature exceeds the setting, and burns whatever is in the chamber. Is a new electronic control a possible fix? The thermostat and heat control check out ok.
For model number YWFE745HOFSO
Hi Warren, thank you for reaching out. According to our research, we recommend checking the temperature sensor, part number PS11726314. If this is fine, we suggest inspecting the bake element, part number PS11703285. Replace this part if it is faulty. If this does not solve your problem, the electronic control board, part number PS12704743, is probably faulty and needs to be replaced. We hope that helps!
oven overheats when on bake and broiler is on unplug broiler wires and oven heats up normal
For model number wfe770h0fz2
Hello Carrol, thank you for the question. According to our research, you may need to replace the broil element, part number PS12711787, to fix the issue. Glad to be of help!
Broiler and bake element will not come on. Stove top works fully. Convection burner works fully. 120vac at broiler and bake element at test. Had ocerheat code F6E1 (replace mrc control) . Resistance on three elements is 17ohms as per spec
Checked small thermal fuse for continuity it is good. Should I have 220vac at broil and bake when switched on? I here relays click but it looks like a second common relay for L2 (DLB(k1) on schematic has to switch for 220vac? Is it likely my control (mrc)has gone bad? I dont want to spend 500 if i dont have to.
For model number Ywfe745h0fs1
Hi Blair, thank you for contacting us. Based on the description that you have provided, we would suggest checking the temperature sensor, part number PS11726314, as it is most likely faulty and may need to be replaced. The sensor and electronic board are what controls the oven and since you have already replaced the board, the sensor is most likely at fault. Let us know if you have further questions!
preheat temp not going up to the setting, 350 only comes up to 285 and stops
For model number WFE77OHOFZ2
Hello Ronnie, thank you for asking. Based on the description that you have provided, we would recommend checking the temperature sensor, part number PS11726314, to fix the issue. We hope this solves your problem!
The oven doesn't stop at set temperature it continues to climb without regulating. The temperature probe test ok.
For model number WFE745H0FS1
Hello John, Thank you for your inquiry. If you've already tested the temperature sensor, we would recommend checking the safety thermostat, and the control board. Good luck with your repair.
Hello Elizabeth, thank you for your inquiry. The first part we would suggest testing is the thermal fuse, part number PS11740991. Good luck with the repair!
Whirpool YWFE745H0FH1
After replacing a broken bottom element, my oven heats up to 230 degrees in over 35 minutes and does not heat more than a degree thereafter.
temperature sensor change, thermal fuse test good, what is my problem
For model number YWFE745H0FH1
Hello Mylen, thank you for reaching out. Based on our understanding of the issue, we would suggest checking the control board, part number PS12704743, to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
