Ask our experts a question about this part and we'll get back to you as soon as possible!
10 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jonny
November 16, 2019
Hi there, my dishwasher will not heat/dry. I'm thinking i need a new control board. I've tested across the heating element, 13ohms across as well as on the whole circuit. High limit seems good, put a blow dryer up to it, didn't trip open. Also checked the thermistor, resistance would drop from 55000ohms to 27000ohms in hot water. I had someone check the relays on the board and those seemed okay. Do you happen to know how long into the cycle before power should come from the board to the heating cycle?
For model number WDT970SAHZ0
Good Day Johnny. Thank you for your question in regards to your unit (Model Number WDT970SAHZ0). We do apologize but we were not able to locate the information you requested. For more specialized assistance or to speak with someone about this, we recommend calling the manufacturer of the equipment directly. They can be reached at by phone by calling 800-807-6777. Best Regards.
Was this helpful?
Thank you for voting!
Patsey
January 5, 2022
need the control panel whirlpool dishwasher
For model number wdt730pahzo
Hi Patsey,
Thank you for your question. The part number listed under your model number for the control panel is PS16217709. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
My Whirlpool dishwasher stops during cycle and dishes are still dirty
For model number WDF110PABW5
Hello Charles, Thank you for the question. This could be an indication the Dishwasher Electric Control Board is not proceeding through the cycles properly and may need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
After selecting washing cycle and closing door, the front indicator light goes steady for a few seconds then goes into blinking mode. Nothing happens after that.
For model number WDTA50SAHZ0
Hello Hector, Thank you for the question. A blinking Start light indicates an interruption in the cycle or start-up. We suggest unplugging the appliance from the power source for 5 mins to see if this resets the appliance. If not we suggest to make sure the Door Latch is closing properly. We hope this helps!
Was this helpful?
Thank you for voting!
Bryan
March 22, 2022
Error Codes 61 and 64. Dishwasher fills, but doesn't wash.
For model number MDB8989SHZ0
Hello Bryan, Thank you for the question. The 6-1 Error code indicates it Won't fill and the 6-4 indicates The float switch is open. We suggest checking the overfill float switch to see if it's stuck or if an item is stuck under it. Check if the inlet water fill valve is properly shutting off the water supply when the dishwasher is off. If everything looks good, you may need to replace the Float Switch, PartSelect Number: PS11750031. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
I have a Kitchen Aid Dishwasher Model number - KDTE234GBS0 that is NOT drying the dishes. I have tested both that I have good continuity on both the heating element and the High Temp Thermostat switch. I have also checked and cleaned the filter. I'm looking for a suggestion for a direction to turn to continue my troubleshooting process.
For model number KDTE234GBS0
Hi Mark, thank you for reaching out. We have researched your model and found that the issue is probably with the Console, part number PS12348002. If that does not take care of the issue, then the problem is most likely to be related to the Control Board, part number PS12704676. If you require assistance placing an order, please contact customer service. We hope that helps!
My dishwasher fills but will not start the washing cycle I can open the door and shut it back and hit resume button and it starts
For model number Wdf520paqm7
Hi Danny, thank you for your inquiry. Our research has found that a faulty door latch could be the cause of your issue. Part number PS11756967 should fix this problem. We have attached a video to assist with your repair. We hope this helps.
Dishwasher stops washing during wash cycle and doesn’t fill
For model number MDB4949SHZ0
Hello Justin, thank you for the question. We would recommend checking the control board, part number PS12583931, to fix the issue. We hope this solves your problem!
Recently our dishwasher started tripping the breaker in our electrical panel. We have checked the wiring connection but it was tight. Do you have thoughts on what part should be replaced so it will not trip the breaker?
For model number KDTE234GWH0
Hello Todd, thank you for contacting us. According to our research, the issue is most probably with the heating element, part number PS9494999. You may need to replace it to fix the issue. We hope this solves your problem!
The dishwasher starts a wash cycle but does not complete it. I have replaced the soil sensor and the diagnostics does not show a error code. Could this be the electronic control board needs to be replaced?
For model number MDB4949SHZ0
Hi, thank you for reaching out to PartSelect. Yes, the issue could be with the control board, part number PS12704672. We would recommend checking it to fix the issue. Good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
