EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

ADB1400AGW3 Maytag Dishwasher - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dishwasher Rack Track Stop – Part Number: WP8565925
$9.62
In Stock
Dishwasher Rack Track Stop
★★★★★
★★★★★
(145)
Part #WP8565925
The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack stop may need to be replaced. The replacement part may differ slightly from the broken part, depending on the model. However, the different styles are interchangeable. This product is sold individually and comes in both a white and grey plastic version. Many of our customers found this repair to be very easy and takes less than 30 minutes to complete. Simply snap the old part out and snap the new part into place. You will not require any tools to complete the job. This is an authentic part approved by the manufacturer.
Dishwasher Heating Element – Part Number: W10518394
$46.34
In Stock
Dishwasher Heating Element
★★★★★
★★★★★
(114)
Part #W10518394
This manufacturer-certified heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dishes are not drying or the water in the dishwasher is not getting hot you may need to replace the element. This kit includes the heater, two heater fasteners, and is a genuine OEM part. Please remember to disconnect the power before starting the repair. Use a multi-meter to test your heating element for continuity to determine whether this is the part that is causing your symptom. This part does not include any washers. To make your repair, disconnect the wires from the bottom of the element in the back, remove the plastic nuts holding it in place, remove the element, and repeat these steps in reverse order to install your new part. This is an easy repair that requires only a screwdriver, wrench set, and should take less than 30 minutes.
Dishwasher Mounting Bracket – Part Number: WP8269145
$15.00
In Stock
Dishwasher Mounting Bracket
★★★★★
★★★★★
(14)
Part #WP8269145
The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward. The bracket is made entirely of metal. It is recommended to check all brackets, if applicable, because they often wear at the same rate and both may need to be replaced. This is an OEM part that is sourced from the authentic manufacturer. Tools needed are a pair of needle nose pliers and a screwdriver.
Dishwasher Friction Sleeve – Part Number: WP8268961
$9.62
In Stock
Dishwasher Friction Sleeve
★★★★★
★★★★★
(37)
Part #WP8268961
This part helps to keep your door quiet when it opens and closes.
Dishwasher Lower Spray Arm – Part Number: WPW10491331
$44.23
In Stock
Dishwasher Lower Spray Arm
★★★★★
★★★★★
(50)
Part #WPW10491331
This is a lower spray arm for a dishwasher. The lower spray arm allows water to be spread evenly throughout the dishwasher tub with the proper force so dishes come out clean. This spray arm is gray in color and is about 20 inches long. You may need to replace this part if the water is not being distributed.
Dishwasher Retainer Clip – Part Number: WPW10503548
$22.52
In Stock
Dishwasher Retainer Clip
★★★★★
★★★★★
(18)
Part #WPW10503548
This part is used to hold the access panel in place. Sold individually.
Dishwasher INLET VALVE – Part Number: W11175771
$54.24
In Stock
Dishwasher INLET VALVE
★★★★★
★★★★★
(39)
Part #W11175771
This water inlet valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
Dishwasher Filter – Part Number: W10872845
$48.45
In Stock
Dishwasher Filter
★★★★★
★★★★★
(40)
Part #W10872845
This dishwasher filter is a genuine OEM component designed to work with the water pump, preventing debris from entering and potentially damaging the pump system. Made with a gray plastic top and bottom, each approximately 5 inches in diameter, the filter plays a critical role in maintaining proper drainage and cleaning performance. Over time, the filter may become clogged or damaged, leading to poor cleaning results or drainage issues. Replacement is straightforward: turn the old filter counterclockwise to unlock and remove it, then screw in the new filter, ensuring it is securely seated. Regular inspection and replacement help maintain optimal dishwasher function.
Washer Hose Clamp – Part Number: WP596669
$7.47
In Stock
Washer Hose Clamp
★★★★★
★★★★★
(1)
Part #WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on the appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.
Dishwasher High Limit Thermostat – Part Number: WP661566
$29.47
In Stock
Dishwasher High Limit Thermostat
★★★★★
★★★★★
(10)
Part #WP661566
This part acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this part will shut down power to the heating element.
Middle Spray Arm – Part Number: WPW10498900
$43.18
In Stock
Middle Spray Arm
★★★★★
★★★★★
(22)
Part #WPW10498900
Enhance the efficiency of your Whirlpool dishwasher with this top-quality spray arm. This essential part rotates and sprays water effectively to clean the dishes inside the dishwasher tub, providing a thorough and comprehensive cleaning. Durably constructed, it stands up to regular use and ensures a lasting performance. Keep in mind, it's advised to wear work gloves in order to protect your hands while handling the repair. Invest in this Whirlpool spray arm for an unmatched cleanliness standard.
Dishwasher Retainer Clip – Part Number: WPW10503549
$6.40
In Stock
Dishwasher Retainer Clip
★★★★★
★★★★★
(15)
Part #WPW10503549
This part is used to hold the access panel in place. Sold individually.

Questions And Answers for ADB1400AGW3

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim - For model number ADB1400AGW3
February 4, 2023
What would cause the dishwasher to fill, but not start the actual wash? The water fills, but it doesn’t wash the dishes. The cycle will run, the soap door opens, then when the cycle is complete, the water is drained. But the dishes were never washed
Chris Boyle Profile
Hello Tim, Thank you for writing. This could be an indication the Circulation Pump is faulty and not circulating the water through the Spray Arms to wash the dishes. We hope this solves your problem!
$78.26
On Order
Circulation Pump
2 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Joyce - For model number ADB1400AGW3
April 8, 2025
I noticed that my top rack is drying the dishes. I noticed that the float assembly is broke. So my question is do I have to replace the lever,and the switch also?
Chris Boyle Profile
Hi Joyce, thank you for reaching out. No, if only the float assembly is broken, then you do not need to replace the switch and the lever. You just need to replace it. Its part number is PS11753319. We hope this solves your problem!
$51.76
Special Order
Float Assembly
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Jim - For model number ADB1400AGW3
March 13, 2024
I have hot water but the dishes are coming out wet
Chris Boyle Profile
Hello Jim, thank you for getting in touch. We would recommend checking the heating element part number PS8260087, to solve the problem. It helps dry the dishes at the end of the cycle. Glad to be of assistance!
$46.34
In Stock
Dishwasher Heating Element
Was this helpful?
Thank you for voting!
Janice - For model number ADB1400AGW3
December 11, 2024
I rubber stopper to keep door from dropping open is broken
Chris Boyle Profile
Hi Janice, Thank you for writing. The Hinge Bushing for this model is listed as PartSelect Number PS11745491. The Bushing is sold individually. Thank you for the inquiry, good luck with the repair!
$34.95
In Stock
Hinge Bushing
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the ADB1400AGW3

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Heater element broken.
238 of 282 people found this instruction helpful.
  • Dennis from Sedro Woolley, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Wrench set
Step 1: Remove the screws in the bottom of the countertop.

Step 2: Remove the screws holding the bottom kickplate.

Step 3: Loosen leveling legs.

Step 4: Pull dishwasher out of hole.

Step 5: Unlplug dishwasher.

Step 6: Disconnect wires from bottom of element in back.

Step 7: Remove plastic nuts holding element in place.

Step 8: Remove element.

Step 9: Reverse Steps 1-7.

Step 10: Drink beer.
Was this helpful?
Thank you for voting!
Lost dishwasher brackets
78 of 118 people found this instruction helpful.
  • Judith from Essex, MA
  • Easy
  • 15 - 30 mins
  • Screw drivers
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
Was this helpful?
Thank you for voting!
My filters had completely clogged up with hard deposits and food left on the dishes after running the dishwasher.
53 of 68 people found this instruction helpful.
  • Kathy from TECUMSEH, MO
  • Very Easy
  • Less than 15 mins
My filters had completely clogged up and had not cleaned my filters at all which was a no-no.I had lots of food left on the dishes after running my dishwasher, so I took bothp filters out and replaced them no tools required. I won’t be using powdered or liquid detergent for my dishwasher anymore only pods and promise to clean my filters once a month, so hopefully that’ll help keep them clean. Very easy replacement even for an old woman.
Was this helpful?
Thank you for voting!