GE/GE_Thumb/00139555i02.gif
See part 101 in the diagram

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Dishwasher Heating Element Assembly

★★★★★
★★★★★
22 Reviews
$47.31   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS12582671
Manufacturer Part Number WD05X24776
Manufactured by GE
Product Description

Dishwasher Heating Element Assembly Specifications

This heating element is for dishwashers Genuine Original Equipment Manufacturer (OEM) parts! This heating element is for dishwashers. The heating element heats the water during the dishwashing cycle and helps dry the dishes at the end of the cycle. Unplug the dishwasher before installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Not drying dishes properly | Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric.
Part# WD05X24776 replaces these:
WD05X10015, WD05X21294, WD05X21716, WD05X23763
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

16 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Peter
December 13, 2018
Dish washer not cleaning dishes. If you open the door after the start cycle runs awhile the water in the bottom isn't hot. We made sure a hot water faucet close by ran until the water was hot before it went into the dish washer. I checked the element and wiring from the plug on the pc board and i get 16 ohms. I didn't check to see if i was getting ac120v at the element. Limited place running. There are no alarms. Filters have been cleaned. Should the water level be higher than the element?
For model number GDF610PMJ2ES
Hello Peter, thank you for your question. The water should be very close to the element but not above the element. The element should be reading 16 ohms, or very close to that. The control board turns on and off the element, so if you're getting no heat to the dishwasher, but the element is testing at 16 ohms, the issue is probably the electronic control board. I hope this helps!

11 people found this helpful.

Was this helpful?
Thank you for voting!
Marie
November 13, 2018
I ordered the heating element and am wondering if it comes with installation instructions if not how to i get the instructions
Hi Marie, Thank you for your question. We get our parts prepackaged from the manufacturers and they may or may not come with instructions. There instructions that customers have left on our website that you may reference. They will be found on the same webpage as the part. I hope this helps. Thank you and have a great day!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Karla
April 24, 2019
I had a spatula that was on the heating element as the dishwasher was running and since that happened my dishwasher no longer heats water or dries the dishes. Any suggestions?? i was going to order a heating element from you but thought i better ask this question first thank you so much
For model number GDT695SMJ2ES
Hi Karla, Thank you for your question. If the spatula melted on the heating element it may have been damaged and it will need to be replaced. To verify if it is working correctly, you will need to test it with a multimeter to the continuity. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Nicholas
January 9, 2019
Does this unit have a replaceable thermostat? My heating element is not working during the wash cycle.
For model number GDT530PSD2SS
Hello Nicholas, Thank you for the question. This model does not have a thermostat. If it is just the one cycle that the element is not heating for but works in the others, you may need to replace the Main Control Board, PartSelect Number PS12113186. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Wayne
January 29, 2019
We ran error check-no errors also ran the service mode and found the element would not turn on. Checked element to have 16 ohms, checked voltage to be going to element, checked both limits, checked circuit board and replaced. The element is still not working. What next?
For model number gdf570sgf0ww
Hi Wayne, Thank you for your question. If the heating element is not heating see if the door is latching correctly. Sometimes if you have a faulty door latch this can cause issues in other areas of the dishwasher. Also Check the wiring to the element to see if it is working. If all else fails, you will need to replace the element. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Mary
November 20, 2019
I’m looking for the high limit thermostat for my GE dishwasher. Thanks.
For model number GDT580SMF4ES
Hi Mary, thank you for your question. You would need to replace your control board as the thermostat is part of your board: PS11721500. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Dennis
January 7, 2020
The dishes weren't getting clean or dry. Pulled the heating element and checked the resistance and it was within specs, reinstalled the heating element and attached a multimeter and ran the machine through a normal cycle with wash temp boost and heated dry enabled. I was getting less than 1 volt to the heating element. I traced the wiring and found a thermostat part number cr-71 210f p014. It is a manual reset thermostat and it trips on high temp and has to be manually reset. However I can not find any information about a thermostat mounted to the bottom of the tub on this website or the owners manual. Where do I need to go to find a replacement or upgrade to a automatic reset thermostat?
For model number GDF510PGD2WW
Hello Dennis, Thank you for the question. The thermostat is only sold as part of the Harness sold with the Wash Pump Kit, PartSelect Number PS12171007. we hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Kevin
March 3, 2020
The dishes are coming out still wet in my GE dishwasher when the heated dry option is turned on. Used to dry just fine, but last three loads have been wet at the end of the cycle. Based on viewing the other comments, i used a multimeter to measure the resistance of the heating element. I place one lead on each of the gold parts where the heating element protruded from the basin of the dishwasher. The reading was consistently ~1.2 ohms. Is this the proper way to measure the resistance of the heating element? Does this reading of ~1.2 ohms indicate an issue with the heating element or something different? Thanks.
For model number GDT635HSJSS
Hello Kevin, thank you for your question. Yes, that is the right way to test. The element should be reading 16 ohms, or very close to that. The control board turns on and off the element, so if you're getting no heat to the dishwasher, but the element is testing at 16 ohms, the issue is probably the electronic control board. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Tim
June 27, 2021
How does heating element for dishwasher disassemble out of the dishwasher
For model number DDT595SMJ2ES
Hello Tim, Thank you for the question. Unplug the dishwasher before installing this part. Wear work gloves to protect your hands. You will need to first remove the bottom spray arm by unscrewing it from the base. You will next need to pull the Dishwasher out from the cabinet and tip it back. Under the appliance towards the back you will see the wires connecting to the element. Once the wires are carefully removed, you can unscrew the nuts that hold the element in place. Once the nuts are removed, you can open the door and pull the element out. Reverse steps to reinstall the new element. We recommend taking pictures as you go for help reinstalling if needed. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Paul
June 28, 2021
Does this fit my model gdf570sgf2cc
For model number GDF570SGF2CC
Hello Paul, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12582671. We hope this helps!

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 9 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    Diswasher not drying dishes
    Didn't actually do the compete repair but got close. Pulled out dishwasher, disconnected and checked continuity on the existing heating element (about 16 ohms) the new element was also about 16 ohms. This indicates they both were working fine and no need for replacement. Next step would have been to swap the elements would have been simple. Tried to replace main board as well, still not the issue so giving up and replacing the dishwasher. It wasn't the high temp cut off thermostat either incidentally and no error codes in maintenance mode. Check continuity of your existing element before ordering to save aggravation.
    • David from SHAWNEE, KS
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    17 of 18 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    The dishes were not dry after the wash cycle
    Open the washer, remove the bottom dish rack, then twist off the bottom water sprayer. Use a screwdriver to remove the mounting/ stabilizing screws so you can slide out the dishwasher. Close the dishwasher and slide it out. Underneath at the back there are two wires powering the drying element, carefully remove them. Use an adjustable wrench to remove the two plastic mounting nuts for the drying element. Open the washer and remove the old drying element, and insert the new element. Reassemble the dishwasher in the reverse order if disassembly.
    • Daniel from JACKSONVILLE, AL
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers, Wrench (Adjustable)
    12 of 13 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Dishwasher not heating/drying
    Replaced heating element. This was the path of least resistance but the problem persisted. I tried resetting the dishwasher but still nothing. My last resort is the circuit board. I checked the relays on the old board and they are fine so it must be something else on the circuit board. The dishwasher is not really that old (4 years) and everything else is fine. Just ordered the board so I really hope this fixes the problem.
    • Cynthia from LAUDERHILL, FL
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    6 of 7 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Dry cycle was not working and dishes weren't getting dry.
    Unplugged the dishwasher and turned off the water. In order to pull the dishwasher out I had to remove disconnect the waterline. Opened the dishwasher door to remove the screws attached under the counter holding the dishwasher in place. Once removed I pulled the dishwasher out of the under counter pocket far enough that I could access the rear connections to the heating element. Carefully disconnected the wires connected to the heating element and then loosened the large nuts securing the heating element. Once the nuts were removed I disengaged the element from the holders and removed it from the dishwasher. Installed the new element in place engaging it into the holders inside the dishwasher. Then moved back to the rear of the dishwasher installing the nuts that were removed earlier on the new element and reconnected the cables.

    I ordered my new heating element prior to checking the continuity of the old one. I checked the continuity of the old one once it was removed and it was ok, not great but still acceptable so I knew the new element wasn't going to fix the issue, but installed it anyways. My issue was actually the float switch, so if you want to be sure of your issue, remove the current heating element from your dishwasher and check the continuity before ordering if you want to save some money.
    • Heath from PARKER, CO
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Screw drivers, Wrench (Adjustable)
    3 of 3 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Dish washer not heating water not drying dishes.
    Parts Select has excellent video instruction. they are way better than I could describe. the repair went smoothly. the heating element wasn't the issue. and it's may not be yours either. I found that the flood switch was the problem part number PS8690623. It's located under the filter screen in the bottom Yes that long grey plastic thing under the screen. It's held in by two 1/4 inch screws. Use a wet dry vacuum or towels to dry up the water in the sump. ABOVE ALL don't drop the screws. You'll be taking the pump apart if you do. Gently lift out the flood switch. There will be wires plugged into the base. With a flat screwdriver gently pop off the white plug from the green base. The plug only goes on one way reassemble in reverse order.
    • Richard from SPRING HILL, FL
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Nutdriver, Pliers, Screw drivers, Wrench set
    3 of 3 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Doesn't complete dry cycle, no clean light, random noises as if door was closing
    After replacing UI board, I replaced the mainboard. still did not solve the problem. The element tested good and I had removed the flood switch, rinsed and blew it out so it rattled but the damage was done. Replacing it made the dishwasher heat water and heated during dry cycle. Removed fine filter, removed course filter, removed two screws with nut driver, removed flood sensor and then reversed. A year or so ago, the dishwasher flooded for no apparent reason, wondering if that was the beginning end of the switch!
    Other Parts Used:
    Flood Switch
    • Jeff from Downingtown, PA
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Nutdriver
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Dishwasher was not heating up to dry
    Took out the old heating assembly and installed the new one
    this did not solve my problem and I ended up buying a new dishwasher and returned the part
    Spent as much in shipping to get the part and return it as the part cost itself
    Next time I will just replace the dishwasher in the first place.
    • Nicholas from CONCORD, NH
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Pliers, Wrench (Adjustable)
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    No heat in both water and air
    Followed troubleshooting procedure to determine that defective Flood Switch caused the problem and not the Heating Element. Replaced only the Flood Switch. I also replaced a deteriorated door gasket.

    De-installed dishwasher from cabinet, removed door, and tipped unit over with back of tub resting on floor.

    I followed the document referenced here for the troubleshooting and repair procedures: GE Appliances Technical Service Guide, 2012 GE Dishwasher, 31-9226.pdf available on web.
    Other Parts Used:
    Flood Switch
    • Alvin from SCHENECTADY, NY
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      More than 2 hours
    • Tools:
      Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Dishwasher not heat or drying dishes
    Turned off pier at breaker. Removed dishwasher from under counter after disconnecting water line from dishwasher and drain tube from under sink. You might get a little residual water but not much. Removed old flood switch took about 2 minutes. Replaced with new flood switch. Then tilted dishwasher back to get to plastic nuts that hold down heating element. Set unit back down and removed old heating element then replace it with new one. Replace plastic nuts that hold element. Exact parts makes job easy. Them put water hose back on an put washer back in place hooked drain hose back up. Turned water and power back on. Tested unit worked perfectly. Hardest part of job was putting the dishwasher back into counter and getting the Instalation back on top.
    Parts replacement time was about 10 minutes.
    Disconnecting and reconnecting and replacing dishwasher 40 minutes. But I wouldn’t pay anyone to do this because it’s really not difficult.
    Other Parts Used:
    Flood Switch
    • Mike from FRESNO, CA
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Screw drivers, Wrench (Adjustable)
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      22 Reviews
      4.0
      Filter By Rating:
      • 5 Stars
        14
      • 4 Stars
        3
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        5
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS12582671
      Manufacturer Part Number: WD05X24776
      Brand
      Model Number
      Description
      General Electric
      ADT521PGF0BS
      Dishwasher
      General Electric
      ADT521PGF0WS
      Dishwasher
      General Electric
      ADT521PGF2BS
      Dishwasher
      General Electric
      ADT521PGF2WS
      Dishwasher
      General Electric
      ADT521PGF4BS
      Dishwasher - DISHWASHER
      General Electric
      ADT521PGF4WS
      Dishwasher - DISHWASHER
      General Electric
      ADT521PGF6BS
      Dishwasher - DISHWASHER
      General Electric
      ADT521PGF6WS
      Dishwasher - DISHWASHER
      General Electric
      ADT521PGJ0BS
      Dishwasher - DISHWASHER
      General Electric
      ADT521PGJ0WS
      Dishwasher - DISHWASHER
      General Electric
      ADT521PGJ2BS
      Dishwasher - DISHWASHER
      General Electric
      ADT521PGJ2WS
      Dishwasher - DISHWASHER
      General Electric
      CDT706P2M4S1
      Dishwasher
      General Electric
      CDT706P2M5S1
      Dishwasher
      General Electric
      CDT725SSF0SS
      Dishwasher
      General Electric
      CDT725SSF2SS
      Dishwasher - DISHWASHER
      General Electric
      CDT725SSF4SS
      Dishwasher - DISHWASHER
      General Electric
      CDT725SSF6SS
      Dishwasher - DISHWASHER
      General Electric
      CDT725SSF7SS
      Dishwasher - DISHWASHER
      General Electric
      CDT805P2N0S1
      Dishwasher
      General Electric
      CDT835SMJ0DS
      Dishwasher - DISHWASHER
      General Electric
      CDT835SMJ2DS
      Dishwasher
      General Electric
      CDT835SMJ4DS
      Dishwasher
      General Electric
      CDT835SMJ5DS
      Dishwasher
      General Electric
      CDT835SSJ0SS
      Dishwasher - DISHWASHER
      General Electric
      CDT835SSJ2SS
      Dishwasher
      General Electric
      CDT835SSJ4SS
      Dishwasher
      General Electric
      CDT835SSJ5SS
      Dishwasher
      General Electric
      CDT836P2M4S1
      Dishwasher
      General Electric
      CDT836P2M5S1
      Dishwasher

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service