Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pete
February 16, 2024
Can just the splined shaft from the trans that drives the agitator be replaced? The shaft sheared off where it enters the agitator. How did the shaft break and not the plastic? Or do I need the whole trans?
For model number GUD27ESSM1WW
Hi Pete, thank you for getting in touch. The shaft you are looking for does not come separately. It comes in an assembly with the transmission. The compatible transmission kit for your model is part number PS12343556. The shaft can break due to the heavy or misaligned load. It is the shaft that drives the agitator, so it is possible for the shaft to break instead of the plastic part. We hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
March 10, 2024
Hi, I have a GE model # GUD24ESSMWW, is the transmission supposed to have a play to the sides or up and down when the belt is removed from the pulley? With the belt off the pulley the clutch will engage into it just fine but when I put a new belt on it will not and in the spin cycle it will just make a grinding noise.Could it be a wrong belt size or a bad transmission due to the play it has?
For model number GUD24ESSM1WW
Hello John, thank you for your inquiry. Based on our understanding of the issue, we would suggest checking whether you are using the model compatible belt. If this is not the issue, the issue is most probably with the transmission, part number PS12343556. We would suggest replacing it to solve the problem. We hope that helps!
Was this helpful?
Thank you for voting!
Charnea
October 5, 2023
Does this part all I need to fix the broken dryer timer switch on my combo washer dryer ?
For model number Gud27espm1dg
Hi Charnea, thank you for contacting us. The transmission kit you mentioned does not fix the broken switch issue. You may need the dryer knob, part number PS16226089, and the timer, part number PS11721520, to fix the broken switch issue. Glad to be of assistance!