I unplugged the dryer from the wall. I took the back off which was simple then I took pictures of all wires connected to timer switch and then I disconnected the switch and looking at my pictures got the wires connected to the new timer. Put it all back together plugged it back in and was back in business. I'm a 37 year old female massage
... Read more therapist and this was my business dryer I was fixing.
Read less
Jena from BARDSTOWN, KY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer was overheating, found that the timer was not working. Replaced timer and new timer does not work either. Replaced High limit thermostat part number 12073908 and dryer still runs to hot and new timer still don't work. Now looking for and suggestions on what the problem might be.
Replaced the timer. did not fix the overheating problem, replaced the High limit thermostat and that did not fix the problem, new timer does not function, does not time.
Mike from DENISON, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced timer
Very good. Really only one screw holding the timer in place. It was a little difficult finding the right tool to use to remove that screw. But, once found, it was a easy as pie!
pulled off the existing wires and made sure that they went back on the new one in the same place. then took off the existing screws. then took out old timer. replaced the wires on the right connections on the new timer then put the timer back in its position and tested it. the dryer turned on.
Jack from MEMPHIS, TN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer slowly stopped work and dryer wasn’t cutting on
Removed the timer knob, removed the back panel, removed the timer and installed the timer and knob.
Dryer timer spun around therefore dryer would not start.
PULL PLUG ON DRYER. Took off upper back panel with adj. wrench. Took a picture with cellphone. Took off old timer secured with one screw. All wires still attached at this point.Pulled off about 5 or 6 connectors one by one. Took off first connection and replaced that first connection to new timer. Took off second connection and
... Read more put that connection on new timer. I followed this same pattern until all wires were replaced one at a time-to the timer. The picture was just for reference. Put metal timer back on with screw. I did learn whenever replacing a timer also replace the knob connected to the timer i.e. the circular part turned with your hand.
Read less
BILL from DOVER, DE
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Wrench (Adjustable)
13 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stephen
December 30, 2019
Is this part the motor rotate the time or setting?
For model number HTX21EASK0WW
Hi Stephen,
Thank you for your question. This is the timer for the dryer. It allows you the option to choose how long it takes for your clothes to dry. We hope this helps. Thank you and have a great day!
12 people found this helpful.
Was this helpful?
Thank you for voting!
Caitlin
January 7, 2022
My timer and knob are broken/stripped and need replaced. Is this the part that needs replaced?
For model number DWSR483EG8WW
Hello Caitlin, Thank you for your inquiry. The timer also contains the shaft that the knob goes into and is part# PS9493080 for your model. If you also need the knob, the part number is PS1482197. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hello Denver, Thank you for the question. The Timer controls the functions of the appliance such as the cycles. If the appliance powers on but not starting the cycles, the timer could be faulty. You can also test the Door Switch to make sure it is operating. If the switch is faulty, the dryer will not start. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Pascal
March 13, 2022
I have a Hotpoint Dryer that needs both a new Dryer Timer and a new Knob for the new dryer timer. The model number for the dryer timer is :TMD1EM35.
Can you tell me the Part Number or Model Number for the correct knob that goes with this particular Dryer Timer Model?
For model number TMD1EM35
Hi Pascal,
Thank you for your question. Before we can provide you with information on the knob for the timer, we will need the model number from your dryer. We have included a link from our website that you may use to find the model number on it. If you could resubmit your question with this information, we would be happy to help you. We are open 7 days a week. We look forward to hearing from you!
I need a replacement knob. Do you know the replacement number?
Hello Sherry, thank you for contacting us. In order for us to locate the correct parts and repair information we will require the model number of the Appliance. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
Was this helpful?
Thank you for voting!
Bart
October 7, 2022
Will not start, the wife said she went to start it and turned the dial which seemed hard, I checked the dial and the knob is broken so I turned the timer dial by hand. It still will not start. How do I check the timer?
For model number GTD33EASK0WW
Hi Bart, thank you for reaching out. According to our research on the model, the Timer appears to be faulty and you may need to replace it with part number PS11763067. If you need help placing an order, customer service is available 7 days a week. Glad to be of help!
Was this helpful?
Thank you for voting!
Bruce
October 12, 2022
Just replaced time my model number to old timer is POO3 the new one is POO4 dryer does come on now and heats but the timer does nothing, it will not stop dryer and it will start and run in any position, the only way to shut dryer off is open the door…HELP!
For model number GTD42EASJOWW
Hi Bruce, thank you for asking. According to our research, the part you should replace is the dryer timer, part number PS11763064. Also, make sure the knob is not damaged or loose and is working properly. If it is not working properly, replace it as well with part number PS11736611. We look forward to hearing from you if you need assistance with placing an order through our 7-days-a-week customer service. We hope this helps!
Dryer ran, timer did not advance and no heat. This happened for a while (as i still used dryer to tumble clothes after hanging on line). Then dryer quit working all together. Do I need a timer? Start switch has been replaced recently also.
For model number GTD33EASK0WW
Hi Holly, thank you for contacting us. Yes, you need to replace the timer, part number PS11763067, to solve your problem. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
