This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. Check your user manual and model number to see if this is the right part for you. Make sure you empty the lint filter after every use of the dryer and check the filter slot for an excess buildup of lint, which can shorten the life of your filter and be a fire hazard. The screen is approximately 20 inches in length, not including the handle, and around 8.5 inches wide.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Whirlpool, Kenmore, Maytag, Roper.
Part# WPW10717210 replaces these:
AP6023930
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
48 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry
October 7, 2017
What is the length of srceen?
For model number 110.87670100
Hello Jerry, thank you for contacting us. The part is shown on a grid with 1 inch squares, it looks to be approx 20" in length not including the handle. I also looked up the part by your model number and this would be the correct filter. Hope this helps!
20 people found this helpful.
Was this helpful?
Thank you for voting!
Kathy
November 26, 2018
The lint filter i need to know the width and length of it. Thank you
Hello Kathy, thank you for contacting us. The part is shown on a grid with 1 inch squares, it looks to be approx 20" in length not including the handle and about 8.5" wide. I also looked up the part by your model number and this would be the correct filter. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Diane
January 21, 2018
What dryer lint filter do i need for this dryer?
For model number wed4800xqo
Hi Diane,
Thank you for your question. The part number listed for the lint filter under your model number is PS11757278. I hope this helps. Thank you and have a great day!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
November 1, 2017
Hey i seen what my replacement is and all the cross reference part numbers are on your site here. Thank you Whirlpool for providing us customers with such information. Greatly appreciated!! however i do have one question if you don't mind. i know it is not advised, warrantied, or in any way shape or form whirlpools responsibility if anything on the product shall go wrong if any modifications are made. in saying that, can one possibly make his own lint filter? or as i've known them to be called "lint trap". seems like all id need is measurements, some screen material, the existing lint filter frame or in my case find a way to add about 3" onto the bottom of it considering i was cut off from a lousy appliance repairman in my old town before i moved. i'd normally just take it back and have them fix it. i'm rather good with my hands, tools, and mechanical/operational background. i've restored classic muscle cars since i was younger which progressed into a passion/career. plus little (tinkering) things like such gives me just the right amount of free time away to myself that i need in my crazy life. thank you much.
For model number LER6636PW0
Hi Robert,
That is a good question. It is always best for the correct operation of the dryer to use lint filter designed for it. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Brian
July 10, 2019
Which is the correct lint trap replacement?Are your parts used or new?
thanks !!
For model number WD4850bwo
The lint trap or chute for you model is PS12114318, and the filter is PS11757278. We only sell brand new parts.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Scott
September 20, 2019
I have an Admiral dryer model # aed4475tq1. The lint filter is a Whirlpool p/n 8557850.Will this filter fit my dryer
For model number Whirlpool Lint Filter P/N 8557850
Hello Scott, thank you for your question. Yes, the lint filter for this unit is PartSelect Number: PS11757278. Please enter the part number into the site for current price and availability. Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Javier Cardenas
March 7, 2018
A mi secadora ya le cambie 3 veses el fusible de la resistencia se lo cambio nuevo trabaja alrededor de 30 minutos y se quema ya cheque la tuberia de salida y todo esta limpio tendre q cambiar el termostato y el fusible a la vez o cual seria su recomendacion gracias
For model number 11060922990
Hola Javier, gracias por la pregunta. Sí, se recomienda cambiar el termostato de límite alto, número de pieza: PS11741441 al mismo tiempo que el fusible. Buena suerte con la reparación!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Lynn
March 19, 2019
Do you still have a replacement dryer filter for this dryer?
For model number 86572120
Hello Lynn, thank you for your question. Lint Filter part PS11757278 is compatible to your model.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Sue
April 3, 2019
Is this part (lint filter screen) compatible with Maytag model number medc200xw3?
For model number MEDC200XW3
Hello Sue, Thank you for contacting us. I have researched the model you have provided and can confirm the PartSelect Number: PS11757278 is correct for your appliance. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Cecilia
April 25, 2019
Trying to find a replacement lint filter for Amana dryer model ngd4600yq2 serial no. M34328982 i can't find correct info to verify replacement parts. Don't want to order unless it will fit correctly. Thanks
For model number NGD4600YQ2
Hello Cecilia, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11757278. Thank you for your inquiry, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Part Videos
Replacing your Whirlpool Dryer Dryer Lint Screen Filter
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 7 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Needed a new lint filter
Took the old one out, replaced it with new one.
Evelyn from JACKSONVILLE, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer not drying items after one cycle, although dryer was getting hot.
Followed the video instructions that I was directed to through this site. The time it took me includes the time I used to vacuum out the back of the dryer and remove lint build up. The repair was very easy since the video provides all the information you need in an easy to follow format. I used my cell phone and paused when I needed to. Great site, great access to parts and great service. My parts were delivered in 2 days!
The handle would not seat" , with the old dryer lint slot. Had to remove the handle and leave the medal holder , to which the handle was popped on, by slot and hooks.
I inserted the sharp kniife point, pryed back a flap , thus releasing the nylon locking hook, in the slot. then did the other side...I removed the white plastic handle, leaving the metal frame, which lay more flat in the filter channel. I put a box of screws on top of the dryer flap to keep it snug.. this is a Kenmore about 15 years old. Grahare
West from Montgomery, AL
Difficulty Level:
Difficult
Total Repair Time:
15 - 30 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint screen had hole and looked like it was scorched
Just slide out lint remover and inserted new one. Very easy
Peggy (Hairways) from WOODMERE, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle broke
Placed lint filter in opening and pushed!
Jon from KOKOMO, IN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had a torn lint filter
Removed replacement from box. Threw old one out, the new one fit perfectly, and securely.
Carmen from CUSHING, ME
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint filter cracked
Removed old filter, replaced with new.
Cynthia from POLAND, ME
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
140 Reviews
4.9
Filter By Rating:
5 Stars
131
4 Stars
6
3 Stars
0
2 Stars
1
1 Star
2
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David C - 9 days ago
Verified Purchase
Easy-peasy! Pull out the old; insert the new.
Exactly like the original.
★★★★★
★★★★★
Jo W - October 31, 2022
Verified Purchase
PERFECT
This part was exactly what I needed. Ordering was fast, easy and affordable! Swapping out the new part for the old was simple, and I wished that I had done it sooner. I will recommend Part Select!
★★★★★
★★★★★
Theresa P - August 19, 2021
Verified Purchase
Linton screen ??
The part was in great shape, and did not have to wait long for it to arrive.
★★★★★
★★★★★
Tina R - June 11, 2021
Verified Purchase
Fits good and arrived quickly.
Catches lint fine.
★★★★★
★★★★★
Gladys C - June 8, 2021
Verified Purchase
Work as expected
The part was in great condition and works perfectly on my 30 years old dryer. Love it thanks
★★★★★
★★★★★
ARTHUR J B - May 27, 2021
Verified Purchase
Easy repair
A++++++
★★★★★
★★★★★
Leon A - May 7, 2021
Verified Purchase
Fast Easy Service from PartSelect~
Received my new Dryer Lint Screen Filter quickly and liked the way they assured me I was getting the right Part~Nice to see Good Quality Companies still out there!
★★★★★
★★★★★
Meriam C - May 1, 2021
Verified Purchase
Perfectly fit.
Dryer working great again. Thanks.
★★★★★
★★★★★
Cathy P - May 1, 2021
Verified Purchase
easy peasy
Thank you!
★★★★★
★★★★★
James S - April 7, 2021
Verified Purchase
Excellent Supply House
Easy to order and very fast delivery
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11757278
Manufacturer Part Number: WPW10717210
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
