Models > 1107012510

1107012510 Kenmore Dryer - Overview

Sections of the 1107012510

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Multi Rib Belt - 92-1/4" – Part Number: 341241
Multi Rib Belt - 92-1/4"
★★★★★
★★★★★
(341)
PartSelect #: PS346995
Manufacturer #: 341241
This dryer drum belt (Whirlpool Dryer Belt, Drive Belt) has four ridges, three grooves and is 1/4" wide, and 92 1/4 inches in length. It comes in black and is made of rubber. The belt transfers the ro...
$16.60
  In Stock
Order within the next 10 hrs and your part ships today!
Leveling Foot – Part Number: 49621
Leveling Foot
★★★★★
★★★★★
(12)
PartSelect #: PS1609293
Manufacturer #: 49621
If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so...
$7.48
  In Stock
Order within the next 10 hrs and your part ships today!
Drive Motor with Pulley – Part Number: 279827
Drive Motor with Pulley
★★★★★
★★★★★
(21)
PartSelect #: PS334304
Manufacturer #: 279827
This motor fits most Whirlpool incorporated dryer brands before 1996. NOTE: Pulley is NOT available separately.
$133.38
  In Stock
Order within the next 10 hrs and your part ships today!
SCREEN – Part Number: W11522758
SCREEN
★★★★★
★★★★★
(7)
PartSelect #: PS16543575
Manufacturer #: W11522758
This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white a...
$54.18
  In Stock
Order within the next 10 hrs and your part ships today!
Screw, 8/18 x 3/8 – Part Number: WP90767
Screw, 8/18 x 3/8
★★★★★
★★★★★
(2)
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$7.76
  In Stock
Order within the next 10 hrs and your part ships today!
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(1)
PartSelect #: PS385132
Manufacturer #: 72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.44
  In Stock
Order within the next 10 hrs and your part ships today!
Door Gasket – Part Number: W10861521
Door Gasket
★★★★★
★★★★★
(13)
PartSelect #: PS11731610
Manufacturer #: W10861521
This door seal does not include the adhesive glue.
$61.00
  In Stock
Order within the next 10 hrs and your part ships today!
D-Shaped Knob Insert – Part Number: WP8536939
D-Shaped Knob Insert
★★★★★
★★★★★
(1)
PartSelect #: PS11746209
Manufacturer #: WP8536939
This insert is sold individually. Knob not included. Knob is sold separately.
$10.56
  In Stock
Order within the next 10 hrs and your part ships today!
Single Front Panel Cip – Part Number: W10854425
Single Front Panel Cip
★★★★★
★★★★★
(3)
PartSelect #: PS11731288
Manufacturer #: W10854425
This part is the replacement single front panel clip for your dryer. It is made of metal and is approximately 2 inches long and ¾ inch wide. The front panel retainer clip is what holds the front panel...
$12.90
  In Stock
Order within the next 10 hrs and your part ships today!
Seal and Bearing – Part Number: W11035878
Seal and Bearing
★★★★★
★★★★★
(5)
PartSelect #: PS11773177
Manufacturer #: W11035878
This front panel seal kit doesn't include the plastic retainers, reuse the old retainers. No glue is needed, the seal stretches to fit.
$57.51
  In Stock
Order within the next 10 hrs and your part ships today!
Motor Pulley - 60  Hz. – Part Number: WP8066184
Motor Pulley - 60 Hz.
★★★★★
★★★★★
(6)
PartSelect #: PS11744884
Manufacturer #: WP8066184
Sold individually.
$52.47
  In Stock
Order within the next 10 hrs and your part ships today!
Door Catch – Part Number: WPW10610880
Door Catch
★★★★★
★★★★★
(11)
PartSelect #: PS11756723
Manufacturer #: WPW10610880
$27.07
  In Stock
Order within the next 10 hrs and your part ships today!

Questions And Answers for 1107012510

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the 1107012510

[Viewing 13 of 13]
Will not tumble
Fixed by
these parts
Show All
Noisy
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Takes too long to dry
Fixed by
these parts
Show All
No heat or not enough heat
Fixed by
these parts
Show All
Door won’t close
Fixed by
these parts
Show All
Shuts off too soon
Fixed by
these parts
Show All
Heat stays on after drum has stopped
Fixed by
these parts
Show All
Marks left on clothes
Fixed by
these parts
Show All
Timer will not advance
Fixed by
these parts
Show All
Too hot
Fixed by
these parts
Show All
Will not fill with water
Fixed by
these parts
Show All
Touchpad does not respond
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
broken tumbler belt
1. Removed the screws from the lint catcher
2. Removed the bolts from upper rear of dryer
3. Pried off the dryer top from the front (it rests on rear hinges)
4. Disconnected dryer door wiring
5. Removed bolt from inside upper front corners; removed front panel (be careful: the edges are sharp and the tumbler will fall when it loses support)
6. Removed broken belt and lint from interior parts; removed tensioner (which had fallen out of place). Note: The newer models have a tensioner pulley; my older model had a smooth semicircle that was confusing at first glance
7. Flipped dryer onto its back (for easier reinsertion of new belt and tumbler)
8. Placed new belt on tumbler; reinserted tumbler
9. Inserted new belt through tensioner, inserted tensioner "legs" into grooves on floor. Note: The belt will pull the tensioner upright when it's inserted properly (which isn't obvious at first)
10. Made sure belt and tumbler seal were properly installed
11. Replaced parts in reverse order
The process took over an hour because I couldn't figure out how to insert the belt through the tensioner. The trick is to insert the folded belt through the tensioner and onto the motor pulley. If I had to do it again, it would take about 30 minutes (including cleaning lint)
Parts Used:
Multi Rib Belt - 92-1/4"
  • Michael from San Antonio, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench set
121 of 136 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Make humming noise when pressing start button. Would not start
After looking on the website for advice I walked throught the simple steps of disassembling the front, removing the drum, removed the back, disconnected the wire harness. Then removed the blower housing in the back. The blower, mounted on the back side of the motor was very tight. I used a pipe wrench wedged in place and help by my 10 year old Grand-daughter while I used an adjustable wrench to turn the shaft on the front of the motor. Spun the blower off, removed the two clips holding the motor. Then reversed the process when I received the new motor. Care should be taken to avoid damaging the blower fan if a lot of pressure is required.
Parts Used:
Drive Motor with Pulley
  • James from Moscow, IA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
90 of 102 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken belt - drum would not turn
Started out taking the back off, then found online that access is from the front and much easier to get to. Simply pop the hinges in the back of the top panel and then the front of the top is popped off. From there, it is easy to remove the old belt, clean the innards (found 31 cents) and replace the new belt. It was a little disconcerting to see the idler pulley laying loose inside, but the diagram showed exactly how to put it back in place, with the new belt keeping it in place.
Parts Used:
Multi Rib Belt - 92-1/4"
  • Gary from Oakland, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
75 of 85 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!