Quick Question!

Have you ever purchased from PartSelect.com before?

11743851-1-S-Whirlpool-WP71001641-Surface Burner Knob
11743851-1-S-Whirlpool-WP71001641-Surface Burner Knob 11743851-2-S-Whirlpool-WP71001641-Surface Burner Knob https://www.partselect.com/Schematics/Maytag/33441.gif

Surface Burner Knob

Your Price

$12.36
Order within the next 3 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11743851
Manufacturer Part Number WP71001641
Manufactured by Whirlpool

This is a surface burner knob. This knob is a little under 2 inches in diameter. It is a black part with gray numbering indicating the temperature level of the surface burner: low, medium, high, off, and lite. This knob is made entirely of plastic. Its function is to allow the user to control the heat coming from the surface burner on the range. This model will only accept a D-shaped shaft. To make this repair, grab the knob with a tight grip and pull it straight off the shaft. When you receive your new part, you can snap it back into place.

This part works with the following brands: Jenn-Air.

This part works with the following products: Cooktop.

This part fixes the following symptoms:

  • Will Not Start.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 15 reviews What's this?
1-15 of 15
 

471 of 475 people found this instruction helpful

Parts Used:
  • Surface Burner Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Ronald from Philadelphia, PA

One of the surface burner knobs melted and then cracked

the hardest part of the whole thing was finding the part... partselect.com made it easy. the part was delivery quickly using regular mail, and I was simply able to slide the new knob on.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

443 of 529 people found this instruction helpful

Parts Used:
  • Surface Burner Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Gene from Farmington Hills, MI

Though the part number was the same it did not fit

The knob neck was 1/4 inches to long. Therefore it could not be used.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

145 of 211 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Teresa from Clayton, CA

Old parts needed replacement

Removed old knobs and grease filter and replaced with new ones. Excellent service, parts arrived the day after I ordered them. Everything fit perfectly and was just as described on the website. I would certainly use PartSelect again for replacement parts on any listed appliance.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

148 of 229 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Kathy from Queen Creek, AZ

One grate was broken the other was corroded, and the knobs were melted

I replaced the grates and the knobs

Help other customers find the most helpful instructions.

Were these instructions helpful?   

173 of 321 people found this instruction helpful

Parts Used:
  • Surface Burner Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Aaron from Elkton, MD

3 out 4 surface burner knobs were broken

Simply pulledoff and threw away the old bad knobs and slipped the new ones on in thier place- four working burners now!

Most amazing thing was I ordered the parts one afternoon and they arrived the very next day.

Also, your site was easy to navigate and find what I was looking for. Many thanks!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

150 of 289 people found this instruction helpful

Parts Used:
  • Surface Burner Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Kathy from Bell, FL

Stem on the dial split, couldn't turn the burner on

threw out the old and slipped on the new dial....

Help other customers find the most helpful instructions.

Were these instructions helpful?   

148 of 287 people found this instruction helpful

Parts Used:
  • Surface Burner Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Warren from Alexandria, VA

The burner knob brock

Went broke purchasing the very simple part through you PartSelect Appliance Parts

Help other customers find the most helpful instructions.

Were these instructions helpful?   

148 of 289 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Susan from Cherry Hill, NJ

Old knobs broken and couldn't turn on burner

Replacement parts fit as suggested by model number (newer parts are a little different but fit fine). Grates look a bit more modern but hopefully will work fine too.
Amazingly fast shipping!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

145 of 283 people found this instruction helpful

Parts Used:
  • Surface Burner Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Stephen from Bethesda, MD

Broken spindel on knob

took old off, put new knob on, by hand

Help other customers find the most helpful instructions.

Were these instructions helpful?   

68 of 132 people found this instruction helpful

Parts Used:
  • Surface Burner Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Peggy from Ellwood City, PA

Knob broke

pulled it off, went to internet to see if I could find.
Did Find. Ordered and replaced.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 7 people found this instruction helpful

Parts Used:
  • Surface Burner Knob
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools:
Customer: JOHN from GAINESVILLE, GA

Old cracked

pull off old ,add new

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 6 people found this instruction helpful

Parts Used:
  • Surface Burner Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Theresa from Davis, CA

My old knobs melted when someone placed a hot cookie sheet on them

This wasn't a repair; it was a desperately needed replacement. I simply popped off my old knobs and put the new ones on in less than 1 minute. The new knobs took years off my beloved gas Jenn-Air stove.
The knobs arrived within two days of placing my order. Outstanding customer service. I will order from this company again and again.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Customer: Dana from WAUKEE, IA

Valve for turning on gas is immovable

1. Turn off power to the cooktop and turn off the gas. This is extremely critical. 2. Remove the knobs and then the covering. Beneath will be the valve part you need to change. 3. Find a way to mark where all the wires go into the piece that sits over the valve (mine was white with a blue ring in the center). You will see four wires going into it. You can photograph it, or you can use tape and a sharpie to write where everything goes on the parts themselves. It is likely that they will become disengaged at some point during your repair, so the step is crucial. 4. Lift off the piece on top of the valve (the valve goes through the blue hole in the center of the white piece). Don't be afraid to give it a tug, as it can be slightly stuck. 5. Find a way to get underneath the large circular plate (mine was gold colored) beneath the valve in order to remove any screws that are holding the valve in place unseen below the surface. 5. Now back above the surface: disconnect the gas valve attached to the valve. 6. Switch out the valve to the new one and reverse these steps to install it. ****7. If you are unable to get beneath the plate where the valve is attached on the underside, no worries. Take the new valve and carefully unscrew the top two screws (need a special tool from a hardware store) and similarly take off the screws on top of the broken valve. Be very careful to remove the top of the old valve slowly enough to see exactly how the inside pieces have to be put together. Essentially, you will find a spring and a small ring with three notches. The small part of the spring goes on the bottom, the larger part of the spring faces upward, and on top of that goes the ring with the three notches aligned in a certain way that's very important so that when you put it back together not only will the valve depress properly but you will be able to change the fire from low to medium to high. Make sure you can depress the valve a little bit, if not you have to readjust the ring until it's in the proper position. 8. Turn on gas and power to be sure it works. 9. Close unit. ***Note: if any of your parts accidentally dropinto the opening, use a magnetized srcrewdriver to retrieve them.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 5 people found this instruction helpful

Parts Used:
  • Surface Burner Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Mae from Forty Fort, PA

Knobs were no longer legible

Simply remove old control knobs and replaced with the new ones. I talked to the saleswoman and she was extremely helpful and assured me it was the right part. And it was.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 6 people found this instruction helpful

Parts Used:
  • Surface Burner Knob
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools:
Customer: James from Pittsboro, NC

The new maytag knobs did not depress the half-round metal post and therefore did not allow the knobs to turn.

Inside the knob, I placed a dab of CA glue on the small plastic projection , which was designed to press against the metal post, but was just shy of it. By thus building it up the knobs function perfectly.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-15 of 15

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11743851
Manufacturer Part Number: WP71001641
Brand Model Number Description
Jenn-AirCCG406BCooktop - Gas
Jenn-AirCCG406LCooktop - Gas
Jenn-AirCCG406SCooktop - Gas
Jenn-AirCG100BCooktop - Gas
Jenn-AirCG100LCooktop - Gas
Jenn-AirCG100SCooktop - Gas
Jenn-AirCG106BCooktop - Gas
Jenn-AirCG200Cooktop - Gas
Jenn-AirCG200BCooktop - Gas
Jenn-AirCG200LCooktop - Gas
Jenn-AirCG206BCooktop - Gas
Jenn-AirCG206B-CCooktop - Gas
Jenn-AirCG206B-ECooktop - Gas
Jenn-AirCG206LCooktop - Gas
Jenn-AirCG206L-CCooktop - Gas
Jenn-AirCG206SCooktop - Gas
Jenn-AirCG206S-CCooktop - Gas
Jenn-AirCVG316BCooktop - Gas
Jenn-AirCVG4100BCooktop - Gas
Jenn-AirCVG4280BCooktop - Gas
Jenn-AirCVG4280SCooktop - Gas
Jenn-AirCVG4380BCooktop - Gas