Electronic Control with Touchpad - Black Specifications
As per the manufacturer, this part does not have the P13 connector.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
Jenn-Air.
Part# WP5760M301-60 replaces these:
AP6009795, 5760M301-60, 74006127, 74008206
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
December 20, 2018
I've a jen air oven above model number and after it's on for 10 minutes it starts buzzing and displays f1 on the scree. Model no. Jds9860aap serial no. 20503313et. What's your recommendation, should i replace the control panel and if so how much is that and is it still available to purchase.
For model number JDS9860AAP
Hi Joe, thank you for your question. That error code does mean that a button has failed on your touchpad. This part you have questioned on does not go underneath your model. I have linked the correct part down below for you, that matches your model and series number. I hope that helps. Good luck with your repair.
My oven and screen shuts off, I bang the top and it would come back on, now it won't. No error code appears. Do I need a new control panel?
For model number JDS9860AAP
Hello Vicki, Thank you for the question. This sounds like a loose wire or harness. I suggest starting there first. If the wiring is good and secure you may have a defective board. Thank you for your inquiry, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Catherine
October 4, 2019
Oven quit error, code f3. Replaced thermal sensor, baked twice now f3 is back.
For model number JDS9860AAP
Hello Catherine, Thank you for the question. The Error code F3 indicates that your oven thinks the oven sensor is shorted out or is way too hot. This can be caused by either a bad oven sensor or a defective Electronic Control. The Sensor did not fix the issue I suggest replacing the Electronic Control with Touchpad. Hope this helps!
Was this helpful?
Thank you for voting!
Charles
March 10, 2022
Where do I find the error codes on this range?
For model number JDS9860AAP
Hi Charles,
Thank you for your question. You may view the error codes for a Jenn-Air range on our website. We have included a link that you may use to view them. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff