This is an OEM lint filter for a dryer. This lint filter screen has two side guides on either of the screen. One measures 3/8 of an inch wide, while the other measures 5/8 of an inch wide. This part is white and is made of plastic. You may need to replace the filter if the plastic is broken or warped. Simply slide the lint filter out of the slot and slide the replacement filter in. The lint filter collects lint from drying clothes and prevents lint from building up in internal moving parts, specifically the heating coil. Neglecting to clean your lint filter is a fire hazard, be sure to clean it on a regular basis.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Takes too long to dry | No heat or not enough heat | Noisy | Will Not Start
This part works with the following products:
Dryer.
This part works with the following products:
Norge, Magic Chef, Maytag, Crosley.
Part# WP53-0918 replaces these:
AP6009639, 53-0918
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
November 9, 2017
I need a lint filter and the plastic piece it slides into. Thanks
For model number Admiral max capacity
Hi Scott,
Thank you for your inquiry. Before we can assist you further we would need the model number from your appliance. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Howard
May 7, 2018
How do I clean the complete dryer filter not just the filter it self ?
For model number Pyet344ayw
Hi Howard, Thank you for the question. To clean the lint duct you will need to remove the front panel of the dryer and vacuum out the duct. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Part Videos
Replacing your Norge Dryer Lint Filter
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 39 reviews.
What's this?
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
lint filter broke
I pulled out the broken lint filter and put the new one back in, real easy. I am so happy with the prompt delivery I got from PartsSelect.com. I ordered on a Monday and and it was delivered on a Wednesday
Jane from Grand Forks, ND
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
477 of 485 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Heat
Lift the top. Remove (2) screws holding the front of the dryer in place. Lift the front off the 2 retaining clips on the bottom of the dryer. The hardest part of the install was removing and replacing the igniter. A couple of helping hands from the girlfriend to hold the parts in place while I replaced the two screws was very helpfull. Installing the multi rib belt was also very easy with the help of a second pair of arms to reach under the drum to thread the belt onto the tensioner. The lint filter, of coarse was just a matter of throwing the old cracked one away and replacing w/ the new.
First went and got a beer. Looked at the dryer. Drank my beer. Went and got one more, due to long job. Looked at dryer again. Opened the door. Had to get one more beer. Removed filter. Got one more cold one. Put new filter in. Got one more beer. Closed door. Finished!
BRUCE from SAN MARCOS, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
143 of 217 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
agitator wouldn't turn
Not sure, my husband did the repair but said it wa real easy and if he can do it anyone can, lol
Door seal partially torn off. Lint filter worn with holes.
Parts Select made it extremely easy to order parts from their site. Parts came in a timely manner and very reasonable priced. Thanks to Parts Select! Door Seal just needed to be removed and replaced by pushing into little slot openings.
It was easy - I had my 12yr old daughter do it. The old door seal was completely removed, then you placed the new seal in the apropriate knoches that are on the door of the dryer. The lint filter just had to be placed in the vent. - Done.
Dry was heating intermittently at first and then stopped heating.
I first confirmed that the ingitor was working (because I could see it glow with the lights off at the bottom of dryer). I read within Parts Select that intermittent heating was likely the coils and that I could test their resistance to confirm that this was the problem. I removed the coils (very easy) and thenI checked their resistance with a tester. The resistance on one of them was reading 600 ohms instead of the required 1300 ohms. So I replaced them both and presto it works fine. I also took the opportunity to thoroughly clean out the lint (accessible with the front panel removed) and I replaced the lint filter which was ripped and the gasket around the door which was missing a piece. All very easy to do and parts select made it a cinch. For safety I made sure that the gas and electric were off before I did any of this work. oh, I also levelled the foot which made my wife happy.
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout