Lid Hinge WP35-2044 | Official Whirlpool Part | Fast Shipping | PartSelect
Lid Hinge – Part Number: WP35-2044
Lid Hinge – Part Number: WP35-2044 Lid Hinge – Part Number: WP35-2044 Lid Hinge – Part Number: WP35-2044 https://partselectcom.azureedge.net/Schematics/Maytag/48353.gif

Lid Hinge

Product Description

Lid Hinge Specifications

The lid hinge on your washer is connected to the lid and allows it to open and close. If you find you cannot open or close the lid to your washing machine properly, you may need to replace the lid hinge. This lid hinge is an inch and a half long, all white in color, and it is made entirely of plastic. To complete this repair, you will need a Phillips screwdriver and a putty knife to remove the top of the washer, in order to access the screws that hold the lid hinge in place. Be sure to disconnect the power to the washing machine before beginning this repair.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Lid or door will not open, Lid or door won’t close, Will Not Start.

This part works with the following products:

Washer.

This part works with the following brands:

Norge, Admiral, Maytag, Magic Chef, Crosley, Hoover, Amana, Jenn-Air, International.

Part # WP35-2044 replaces these:

35-2044.
Part Videos

Replacing your Norge Washer Lid Hinge

Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 42 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Allen from North Little Rock, AR
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WP35-2045, WP35-2044, WP25-7893
One of the plastic hinge pins brroke
I used a flat screw driver to push in on the releases so I could raise the top of the machine. I then used a torx tool to remove both parts of the hinge, and then used a #2 phillips screw driver, on the new screws I'd also ordered, to re-attach both of the hinge parts. Every thing went just as anticipated.
501 of 504 people found this instruction helpful.
Was this instruction helpful to you?
Glenda from Covington, LA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WP35-2045, WP35-2044, 131658800
hinges had broken over time
easily found correct parts at good price on parts select, ordered. Received the next day and repairs went smoothly, about 20 min and we were good as new.Saved us a repairman visit. thanks.
473 of 477 people found this instruction helpful.
Was this instruction helpful to you?
Jon from Ridgecrest, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP35-2045, WP35-2044
Hinge pin on one side and Lid hinge on the other
First I popped the lid up to about 70 degrees. Then removed the two hinges. Then removed and replaced the two hinge pins. The key is to then just start the two screws for the hinges, slip the pins in and then tighten the hinge screws. Total time was 5 minutes.
31 of 35 people found this instruction helpful.
Was this instruction helpful to you?
Edward from Coventry, RI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WP35-2045, WP35-2044
Cover of washing machine wouldn't stay open, it fell on my wife's hand.
This is a very simple repair, I opened the top of the washer by inserting a screwdriver between the top and the washer cabinet. There are 2 clips on the front of washer, locate and push in to release top. Lift top with lid attached and remove the 2 screws holding the lid to the top of washer. Remove lid and replace hinge pin and hinge.
Replace lid, close top , all done. Total time about 15 minutes or so. Now the lid will stay up and not fall on someone.
12 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Daniel from Slatersville, RI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WP35-2045, WP35-2044, WP25-7893
Plastic hinge pin broken on top cover
First push inner tub to left rear, all the way, and
unscrew hinge from inside of tub. repeat same on
right side. lift cover off and unscrew other half of
hinge off cover, both sides.reverse procedures and your done.
Note: always replace both hinge's new while
you have it apart.
11 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Maurice from Palm Beach Gardens, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP35-2044, MWFP
The Lid of the top load washer would not stay open, it flips down.
Insert a screw driver, in the space between the cabinet and the top to release the two latches, then swing the top open to expose the screws holding the lid hinge. Remove the screw of each hinge, and replace the two hinges.
7 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Harris from Ashland, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WP35-2045, WP35-2044
both hinges on washer lid were broken
if you move the agiatater all the way to one side you can acess the star screws from under the hinge then push the agitator to the other side and acess the screw on the other hinge , you dont have to remove the top of the washer, let me say i did not have the serial no and the people at part select were very helpful and pacient when i called and they got me the RIGHT part the firdt time.thanks again for all your help the job came out perfect and saved me a lot of money for a repair man. ASHER
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Geoffrey from Knoxville, TN
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP35-2045, WP35-2044
Washer lid came off hinges
PROBLEM: The washer lid has two hinge pins that are attached to the lid with Phillips screws (one per pin). The plastic pin that inserts into the hinge broke off, allowing the lid to come free. SOLUTION: First, I removed the lid from the washing machine. Second, I used a Phillips-head screwdriver to remove the original hinge pins from the lid. Third, I replaced the hinge pins. Fourth, I used a flat-head screw driver to pry up the washer top to obtain easier access to the hinge screws. Fifth, I removed the original hinges with a Phillips-head screwdriver (one screw per hinge). Sixth, I attached the new hinges to the washer lid. Finally, I attached the hinges (and lid) to the washer top, then lowered the washer top.
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
James from Oakland, MI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WP35-2044, WP25-7893
Topside door would not remain in an open position; lid hinges worn out.
The lid hinges are fastened to the top of the washing machine body, near the edge of the lid, with 1 screw each.
To remove the old lid hinges, with the lid clamped in the open position, I needed to gain access to the screw heads from underneath, just inside the edge of the lid opening. To get at these screw heads, I needed to push the inside wash drum toward the screw I wanted to remove and wedge something in the gap created between the body of the washer opening and the drum, directly opposite the screw that I pushed the drum towards. What? This is to hold the drum completely out of the way while getting at the screw. My wedge was the handle of a squeege that just happenned to be nearby, but just about anything will work.
Once the drum was secure, I was able to get at the screw head, which, by the way, is a totally blind operation; you cannot see the screw head, only feel it. I guess we're kind of used to feeling our way around these days. Anyway, I had to repeat the wedging thing to remove the other lid hinge.
The only real problem I had was the original (factory installed) screw heads were hex heads, and I struggled a bit finding the correct size allen wrench to blindly remove the screws. It is a good thing that I also ordered 2 new screws along with the new lid hinges because the new screws have phillips heads. Much easier to work with, even though they were a little pricey. The old hex head screws were kind of worn and it would have been a cursing operation to try to reuse them.
Once the old hinges were off, I removed the lid, installed the new hinges on the lid and clamped the lid in place in the open position, while I screwed the new hinges on (wedging the drum out of the way like before). NOTE: It might be a good idea to line the wash drum with newspaper in case a screw slips out and finds its way into one the holes in the drum; lost forever. Anyway, this may sound like alot, but it really isn't. My wife didn't even comment on how the lid isn't smashing down on her any more. That's OK, I'm grateful I'm not the one doing laundry!
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Craig from Mount Shasta, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
Parts Used:
WP35-2044, WP21352320, 21001170
Washer tub stopped turnig and motor made a humming sound
Removed top cover, then removed front cover. Put washer on its side and removed belt. Located motor, noted orientation of retainer wire(v shaped wire that clips motor to frame), removed motor, noted wiring diagram on paper before removing wires from termination points, removed wires. installed new motor, installed wiring, installed wire clip. Turned washer on side and installed new belt. Turned machine on and it worked great.
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
19 Reviews
4.7
out of 5
Filter By Rating:
  • 5 Stars
    14
  • 4 Stars
    4
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11741780
Manufacturer Part Number: WP35-2044
Brand
Model Number
Description
Norge
6433A
Washer - WASHER
Norge
6440A
Washer - WASHER
Norge
6440A REV A
Washer - Norge Washing Machine Model 6440A REV A (6440AREVA) Parts
Norge
6440A REV B
Washer - Norge Washing Machine Model 6440A REV B (6440AREVB) Parts
Norge
6440A REV C
Washer - Norge Washing Machine Model 6440A REV C (6440AREVC) Parts
Norge
6440A REV D
Washer - Norge Washing Machine Model 6440A REV D (6440AREVD) Parts
Norge
6440A REV E
Washer - Norge Washing Machine Model 6440A REV E (6440AREVE) Parts
Norge
6440A REV F
Washer - Norge Washing Machine Model 6440A REV F (6440AREVF) Parts
Norge
6440A REV G
Washer - Norge Washing Machine Model 6440A REV G (6440AREVG) Parts
Norge
6440A REV H
Washer - Norge Washing Machine Model 6440A REV H (6440AREVH) Parts
Norge
6440A REV J
Washer - Norge Washing Machine Model 6440A REV J (6440AREVJ) Parts
Norge
6440A REV K
Washer - Norge Washing Machine Model 6440A REV K (6440AREVK) Parts
Norge
6443A
Washer - WASHER
Norge
6443A REV D
Washer - Norge Washing Machine Model 6443A REV D (6443AREVD) Parts
Norge
6443B
Washer - WASHER
Norge
6530A
Washer - WASHER
Norge
6530A REV A
Washer - Norge Washing Machine Model 6530A REV A (6530AREVA) Parts
Norge
6530A REV B
Washer - Norge Washing Machine Model 6530A REV B (6530AREVB) Parts
Norge
6530A REV C
Washer - Norge Washing Machine Model 6530A REV C (6530AREVC) Parts
Norge
6530A REV D
Washer - Norge Washing Machine Model 6530A REV D (6530AREVD) Parts
Norge
6530A REV E
Washer - Norge Washing Machine Model 6530A REV E (6530AREVE) Parts
Norge
6530A REV F
Washer - Norge Washing Machine Model 6530A REV F (6530AREVF) Parts
Norge
6530A REV G
Washer - Norge Washing Machine Model 6530A REV G (6530AREVG) Parts
Norge
6532A
Washer - WASHER
Norge
6532A REV C
Washer - Norge Washing Machine Model 6532A REV C (6532AREVC) Parts
Norge
6532A REV E
Washer - Norge Washing Machine Model 6532A REV E (6532AREVE) Parts
Norge
6532A REV F
Washer - Norge Washing Machine Model 6532A REV F (6532AREVF) Parts
Norge
6532A REV G
Washer - Norge Washing Machine Model 6532A REV G (6532AREVG) Parts
Norge
6540A
Washer - WASHER
Norge
6540A REV A
Washer - Norge Washing Machine Model 6540A REV A (6540AREVA) Parts