Frigidaire/Frigidaire_Thumb/VLAJQG0H.gif
See part 11 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Surface Burner Igniter Electrode

★★★★★
★★★★★
4 Reviews
$26.43   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS436633
Manufacturer Part Number 316011200
Manufactured by Frigidaire
Product Description

Surface Burner Igniter Electrode Specifications

Use this igniter with sealed burners.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start | Gas igniter glows | but will not light | Element will not heat
This part works with the following products:
Range, Cooktop.
This part works with the following products:
Frigidaire, Tappan, Kenmore, Gibson.
Part# 316011200 replaces these:
AP2123862, 464, 5303311262
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

7 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Lance
    October 3, 2019
    Knob on one burner does not activate igniter, however, 4 of the 5 burners work to activate all igniters.
    For model number bggf3042kfv
    Hello Lance, thank you for your question. We would recommend checking the surface burner electrode, and if the tip is worn down, or corroded we would recommend replacing it. When only one burner doesn't spark at the burner itself, that is a good indicator that the electrode is bad. If replacing that part doesn't fix the issue, we would recommend testing/replacing the PartSelect Number: PS11775689 spark module and the PartSelect Number: PS3409151 spark switches. I hope this helps!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Juan Jaimes
    February 9, 2018
    What tool i have to use to remove the screw that hold the igniter electrode?
    For model number Tappan, model#TGF336BHWE
    Hello Juan, Thank you for your inquiry. You would need a Phillips screwdriver to remove the screw. Hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Juan
    February 11, 2018
    The screw that hold the igniter electrode has an square slot on its head, i can not use any screwdriver to take the screw off. If you know what kind of tool to use,please tell me.
    For model number Tappan-model#TFG336BHWE
    Hello Juan, thank you for your question. If the screw holding the igniter into place is not a Phillips head screw, and has a square hole, use a square head screw driver to remove that part. I hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Lindsay
    July 10, 2019
    I am looking for a spark igniter for my gas range, front right burner. I have a picture of it if you need . I am having troubles finding the correct part.
    For model number CPGF3081KFN
    Hello Lindsay, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2368574. I looked up the part and it is listed as No Longer Available/Discontinued. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Chris
    November 7, 2019
    Will this electrode work for this model?
    For model number Fggf3035rfa
    Hello Chris, thank you for your question. Unfortunately, that will not work. The igniters for this unit are only available by ordering the corresponding Surface Burner Igniter and Orifice Holder. I hope this helps!

    Was this helpful?
    Thank you for voting!
    Eston
    April 17, 2018
    How do I remove the 8-inch square cover over the burner?
    For model number 790.75903992
    Hi Eston, Thank you for the question. Once you remove the grates and the cap the square pan should just lift up and off the cooktop. Hope this helps!

    Was this helpful?
    Thank you for voting!
    Richard
    October 16, 2019
    Top burner ignighters only work on one burner on our gallery seiries gas oven. When i try it infighter,, the ignition sound comes from the only burner that works.
    For model number 119336
    Hello Richard, thank you for writing. We would be happy to look into this, but we will need the model number for your range to do so. Here is a link to some tips on our website for locating the model number for your range: https://www.partselect.ca/Find-Your-Range-Model-Number.aspx. Also, could you please indicate which specific burner is not functioning correctly? Thank you, and we look forward to hearing back from you!

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 2.6 / 5.0, 7 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Igniter porcelain was cracked and burner would not light.
        un-pluged stove,removed the one screw holding the broken igniter. disconected the one wire. installed new igniter and slipped on wire. The igniter came with a new bracket, the old one rusted away which is why the old igniter broke.
        • Rusty from Howell, NJ
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        • Parts Used:
          316011200
        51 of 74 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        broken inner door glass, broken igniter, and the bottom oven panel was rusted
        First, I want to say how WONDERFUL your service was. I needed more info on a part and your phone rep. e-mailed me a picture of the part from which I was able to be sure it was the right part. I ordered the pard one day and they were delivered to my door the NEXT DAY....talk about service!!!

        My husband did all the replacing, he had no problems with any of the 3 items he replaced, he said they were all easy to replace. They all work great. Thank You!!
        • Pam from Belle Vernon, PA
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          1- 2 hours
        • Tools:
          Pliers, Screw drivers, Socket set
        • Parts Used:
          316495901, 316088600, 316011200
        20 of 38 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Bad igniter.
        The stove was older so the burner was hard to get out. The small screw heads broke off, so I had to carefully center punch and drill out the screw bodies. The igniter screw was also frozen in the pot metal burner. That screw requied drilling and tapping with the installation of a new 6-32 screw. Once the burner was refurbished, the igniter mounted easily. Afte attaching the gas line and igniter wire, the burner worked great.
        • chris from Venice, CA
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          1- 2 hours
        • Tools:
          Nutdriver, Pliers, Screw drivers, Wrench set
        • Parts Used:
          316011200
        14 of 16 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        burner would not lite
        no need to remover burner. Lift top up use a 1x4x5" to hold top up. Use short #2 screw driver remove screw and replace with new igniter
        • Terry from Wilkinson, IN
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Screw drivers
        • Parts Used:
          316011200
        9 of 13 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Igniter replacement
        Burner set screws froze up, was able to break 2 of 3 free and broke 3rd off. Used new simular screws to re- thread and fasten burner back in place. Bit of work but everything working. Used oppertunity to clean and re-level while I was at it. Everything good to go.
        • David from Livingston, MT
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          1- 2 hours
        • Tools:
          Pliers, Screw drivers, Socket set
        • Parts Used:
          316011200
        7 of 11 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        bad igniter electrode on rear left burner
        If you intend to replace the igniter electrode ( part no. PS436633), purchase a minimum of twelve (12) top burner mounting screws ( part no. PS437925).

        I also recommend that you replace all the electrodes since you have gone to the lengths described below to replace one igniter electrode.

        After time, the heads of the mounting screws become brittle and break off when attempting to remove them with a 3/16" socket or nut driver.

        Be aware that even the new screws are not exactly 3/16 hex, nor do they truly accept a 4.5 mm, or 5 mm socket. The 5 mm has to much slop, and the 4.5 mm, and 3/16" do not fully seat over the head.

        First unplug the stove, and turn off the gas.

        To remove the broken screws, I had to use a hand grinder to grind the heads off (you could be as careful as possible, but you will still damage the porcelain finish of the range top.) Unfortunately every screw has to be removed to lift the range top up enough to gain access to the electrode(s).

        Along with the broken screws being in the burner casting, to replace the electrode, you have to remove the burner to work on it. Remove the insulated wire from the electrode, and then the gas line to the burner.

        I recommend inspection of the insulated wires to see if they may be grounding out to the stove body. With the top removed and the burners still in place, plug the range back in. Turn any knob on (all electrodes should spark at the burner accept the bad one(s)). Observe the wires to see if there is sparking to the stove body. If there is none, continue to replacement instructions. If a wire is sparking to the body, wrap the damaged wire with HEAT RESISTANT tape. Standard vinyl electrical tape won't withstand the heat.

        To remove the burner from the gas line, use a 1/2" open end wrench (preferably a tubing nut wrench) to remove the gas line along with an adjustable wrench to hold the burner to prevent damaging the gas line.

        If your lucky, the cross point (Phillips head) screw that secures the electrode will remove without stripping, but don't count on it. I had to grind those screw heads off as well.

        I used a size no. 30 cobalt drill in my drill press to attempt to remove the broken off screws, but because of the screw/drill size, I could not keep the bit on the hardened screw center, it kept walking off center. I ground the screws flush to the burner surface, used a center point drill, a center punch, and a spring loaded set point punch, nothing worked to keep the bit from wandering off center and into the soft metal casting.

        I had to drill new holes with the no. 30 drill bit just to the right (or left) of the existing holes. Keep the same orientation and mounting distance when drilling, either to the right or to the left.

        The new burner mounting screws did not work for mounting the electrode to the burning, I used small no. 6 self tapping screws to mount the new electrodes to the burner casting (the washer head was to large).

        Reconnect the gas line(s) to the burner(s). It will be necessary to carefully bend the gas lines so as to line the new holes up with the top when remounting the burner(s).

        If I had it to do over again, I would just donate the range as is, while explaining the problem to the donation center. After my experience, I personally don't think it is worth the trouble of replacing the electrodes on a range this old.

        Hope this helps.
        • Michael from SHELBYVILLE, TN
        • Difficulty Level:
          Very Difficult
        • Total Repair Time:
          More than 2 hours
        • Tools:
          Nutdriver, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
        • Parts Used:
          316011200
        3 of 3 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        TOP BURNER IGNITER
        A BIT DIFFICULT - Un-Plug 120v cord - Turn off gas - The Screws that Burners to top were frozen. Putty knife to release top spring clips - Carefully - Lift top up 4 inches - Use a short piece of 2' X 4" to hold top up - Remove wire from bad igniter - Remove 1 phillips screw that holds Igniter - Install new part - reinstall igniter wire - Close Range top lid - Turn on gas - Plug 120v back in - Test Burners = Done! If You Are Not Comfortable With This Kind Of Repair On A Gas Appliance - STOP! And call a qualified Repair Tech.
        • David from MANTECA, CA
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Screw drivers
        • Parts Used:
          WP35-2044, 316011200
        3 of 4 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          4 Reviews
          3.8
          Filter By Rating:
          • 5 Stars
            2
          • 4 Stars
            0
          • 3 Stars
            1
          • 2 Stars
            1
          • 1 Star
            0
            Sort by:
            Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
              Model Cross Reference
              This part works with the following models:
              PartSelect Number: PS436633
              Manufacturer Part Number: 316011200
              Brand
              Model Number
              Description
              Tappan
              14-3083-00-01
              Cooktop - Gas
              Tappan
              14-3083-08-01
              Cooktop - Gas
              Tappan
              14-3083-18-01
              Cooktop - Gas
              Tappan
              14-3083-23-01
              Cooktop - Gas
              Tappan
              14-3093-00-01
              Cooktop - Gas
              Frigidaire
              2343-87A
              Range - GAS RANGE
              Frigidaire
              2823
              Range - GAS RANGE
              Frigidaire
              2823-80B
              Range - GAS RANGE
              Frigidaire
              283440A
              Range - GAS RANGE
              Frigidaire
              283440B
              Range - GAS RANGE
              Frigidaire
              283440C
              Range - FRIGIDAIRE GAS RANGE
              Frigidaire
              283440D
              Range - GAS RANGE
              Frigidaire
              283447B
              Range - GAS RANGE
              Frigidaire
              283447C
              Range - FRIGIDAIRE GAS RANGE
              Frigidaire
              283447D
              Range - GAS RANGE
              Frigidaire
              283460B
              Range - GAS RANGE
              Frigidaire
              283460C
              Range - GAS RANGE
              Frigidaire
              283467B
              Range - GAS RANGE
              Frigidaire
              283467C
              Range - GAS RANGE
              Frigidaire
              28364
              Range - GAS RANGE
              Frigidaire
              2843-80A
              Range - GAS RANGE
              Frigidaire
              2843-80B
              Range - GAS RANGE
              Frigidaire
              2843-80C
              Range - GAS RANGE
              Frigidaire
              2853
              Range - GAS RANGE
              Frigidaire
              28564
              Range - FRIGIDAIRE GAS RANGE
              Frigidaire
              285640A
              Range - FRIGIDAIRE GAS RANGE
              Frigidaire
              285640B
              Range - GAS RANGE
              Frigidaire
              285640D
              Range - GAS RANGE
              Frigidaire
              285640E
              Range - GAS RANGE
              Frigidaire
              285647A
              Range - FRIGIDAIRE GAS RANGE

              Get in touch, we're here to help!

              Open until 10PM EST

              Contact Customer Service