HOLDR-BRUS WP3179908
$
4.64
In Stock
Get FREE EconoShip on orders over $100! T&C apply
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number PS11740831
Manufacturer Part Number WP3179908
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Mixer.
This part works with the following products:
KitchenAid, Whirlpool.
Part# WP3179908 replaces these:
3179908, 4162545
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
December 13, 2018
Can i plus the brush assembly hold ps11740831 with out taking the entire head apart, the brushes are worn and on his stuck inside...i have the brushes that i ordered from you
For model number K45SS mixer Kitchen-aide
Hi David,
Thank you for your question. Before you begin any repair please unplug the appliance from the electrical outlet. Each side of the mixer's motor housing holds a carbon brush underneath a brush cap. 1. Unscrew the brush caps with a flat head screwdriver. Take care when unscrewing the brush caps. The carbon brushes underneath are held in place with springs, so they will want to fly out of the machine when the caps are released. Unscrew the brush caps slowly to prevent the brushes from flying out. 2. Remove the old brushes from the machine. It will be easy to pull the carbon brushes out after the brush caps are removed. 3. Install the new carbon brushes. The carbon brushes for KitchenAid mixers have a special shape. One corner of their otherwise square shape is flattened at a 45 degree angle, ending in a dog ear tag at the base of the brush. Accordingly, the brush holders on the sides of the mixer also have a special shape to accommodate the brushes. One corner of each brush holder is occupied by a square box. The dog ear corner of the carbon brushes must be lined up with the squared-off corner of each brush holder. 4. Reinstall the brush caps. After installing the new brushes, the mixer's brush caps must be returned to hold them in place. Tighten up the brush caps with a flat head screwdriver. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11740831
Manufacturer Part Number: WP3179908
Manufacturer Part Number: WP3179908
Brand
Model Number
Description
Back to Top
HOLDR-BRUS
$
4.64
In Stock
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.