Ice Maker Water Fill Tube Kit WP2196157

Hi Donald, Thank you for your inquiry. I would suggest checking your fill tube to see if there is any ice blockage preventing water getting to your ice maker. The second thing that I would suggest you look into is your water inlet valve. Test both of the solenoids on that part with a multi-meter to see if they are working correctly. Good luck with your repair.

Hello Bobbi, Thank you for the question. If the valve was not the issue and the lines are clear and it is still not filling, this normally means the ice maker is defective and will need to be replaced. Hope this helps!

Hello Bobbi thank you for writing . Yes it does , there are test you can do for the water inlet Remove the water inlet valve from the refrigerator. Disconnect your fill line from your water valve Remove any wire harness or harnesses from your water valve. Push down on the tabs and remove the hoses. Once you remove the water valve, be sure to check the screen for any debris or blockage. Grab a multi-meter and set it to the lowest Ohms of resistance for your part. If you have any analog meter, touching the two metal probes together will zero out. To test your valve, touch one probe to each terminal. Depending on the part, your part can read between 200 and 500 Ohms. Note: If you have a fridge with both an ice maker and water dispenser, your Ohms of resistance may be higher. If your valve didn't reach those levels it probably needs to be replaced. Hope this helps. Contact us anytime.

Hello JoAnne, Thank you for your question. Our sources suggest replacing the ice maker water fill tube kit under part PS11739222 for your model to fix the leaking. We hope this helps.

Hi John, Thank you for your question. Ice cubes that taste funny can be caused by food containers left open or by food that has spilled inside the refrigerator. If the ice has been sitting in the refrigerator and it has not been used, it will absorb food odors. You may also have a bad water supply that is causing the ice cubes to taste funny. I hope this helps. Thank you and have a great day!

Hello Mike, Thanks for your question. This type of issue typically arises from a leak or problem with the water inlet valve. You may want to examine the solenoid and test it with a multimeter for electrical continuity - replace it if it shows no continuity. I hope this helps.

Hi Sahana, Thank you for your question. If your refrigerator is not dispensing water, there are some parts that you will need to check to see which one is causing the issue. You will need to check control bracket, the micro switch and the nozzle and tube. We hope this helps! Good luck with the repair!

Hello Billy, Thank you for contacting us. We recommend replacing both parts together. We have researched the model you have provided and have found the part you are looking for is Part #: PS11747816. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hello Pat, thank you for your question. We have researched your model and found that the issue is probably with the Drain Tube, part number PS12711022. If you require assistance to place an order, please contact customer service. We hope that helps!

Hello Robert, Thank you for your inquiry. It sounds like an issue with the water inlet valve dispenser solenoid, and you will need to replace the entire water inlet valve. You can test it beforehand with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good luck with your repair.