Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
not pumping at all
running like a brand new
Mon from NORCO, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
June 3, 2019
Hi, does it compressor part number w10841139 replaces part number: W10279679. Thank you.
For model number KSSC42QMS01
Hello George, thank you for writing. Our system does not show that it does. For your model the correct replacement is part PS11728057 (W10841139). We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Vahid
November 4, 2021
What is the HP on this compressor? The Kitchen Aid side by side model KSCS25FKSS00.
For model number KSCS25FKSS00
Hello Vahid, Thank you for the question. This compressor is 8 HP. We hope this helps!
Was this helpful?
Thank you for voting!
Benjamin
September 5, 2022
Fridge will warm up then back down normal temp. It does this frequently. Could it be the compressor. Thanks
For model number KSSC42QKS00
Hello Benjamin, thank you for asking! The most probable cause behind such issues is a faulty defrost thermostat (part number: PS11750673). Before moving towards the compressor in troubleshooting, we would recommend to check the defrost thermostat. We hope this helps, please contact customer service for follow-up questions. Thank you.
May I know what is the voltage rating for this compressor.
Hi Moumouni,
Thank you for your question. The voltage for this compressor is 230/3/53-150. The voltage range is 98-140 V. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Margaret
May 31, 2023
Does this compressor (and drier) require any soldering??
Hello Margaret, thank you for your query. According to our research, to remove or attach the filter drier, you may need to use a neutral-flame soldering torch. To attach the new filter, you first have to solder a Schrader valve onto the extra connection. Next, you may need to connect and weld the filter onto the condenser outlet. You may then attach the filter to the capillary tube, weld it on, and place the new compressor in the correct position. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
