Models > WWRE6260DCWW > Instructions

WWRE6260DCWW General Electric Washer - Instructions

All Instructions for the WWRE6260DCWW
451 - 456 of 456
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Start knob broke from being turned too far
Fortunately I watched the video on how to change the knob. I may not have noticed that the metal clip part of the old knob was still attached. Once the old part was removed, the new knob slid right into place.
Parts Used:
Knob and Clip
  • Adrienne from Beaver, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
It had a broken belt.
I just did a google search and found a video that shows to use a zip tie to hold the belt to the big pulley and simply turn the drum and the belt goes right on. Then cut the zip tie off and you are ready to go. Took all of 3 minutes to change the belt from start to finish.
Parts Used:
6-Rib Drive Belt
  • Mike from Madisonville, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
agitator coupling broken
removed agitator unscrewed agitator coupling replaced with new one replaced agitator
Parts Used:
Agitator Coupling Kit
  • charles from WEST HEMPSTEAD, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
leaking
As directed by the book.
Parts Used:
Dual Water Inlet Valve
  • Nicolas from Palisades Park, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
needed a new knob for my dryer
All I did was stick the knob on. How easy was that! Knob works every time. Very pleased with the part.
Parts Used:
Knob and Clip
  • Diane from Johnson Valley, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
wouldnt agitate
Took off old agitator, removed coupling that was bad and put new one on.
Parts Used:
Agitator Coupling Kit
  • Shawna from LaCenter, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WWRE6260DCWW
451 - 456 of 456
Back to Top