All Installation Instructions for Roper Dishwasher WU5650X2

Color didn't match updated look

First I removed the the rubber sides. Then I slide the replacement panel over the exisiting one. That's it no other tools were needed. I didn't even break a sweat.

Parts Used:

Access Panel - White

Door Panel Insert

Belinda from Calunet City, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

slow leak at motor/pump interface

Got parts breakdown online, took pump assy apart, ordered new parts, replaced bad parts, put pump assy and dishwasher back together, piece of cake, no problems.

Parts Used:

IMPELLER

Disk & Mount Assembly

Donald from Webster Groves, MO
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Had a dent in it.

When I came home my husband fixed it. Looks bran new and he said it was simple.

Parts Used:

Access Panel

Marjorie from North Grosvenordale, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Front door panel was missing

I removed the cardboard insert, put the new front panel on and replaced the tabs. That was it!

Parts Used:

Door Panel Insert

Crystal from Bowman, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

seals were leaking,dry rotted from setting five years without using.

I Disconected The 3' hose Behind Impellor.Unscrew Cap Holding Impellor In. Pull It Out, Replce With New One.Put It Back Together In Reverse

Parts Used:

IMPELLER

mike from seymour, IN
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set

2 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

front leak

pulled out the old gasket, aligned and pressed in the new gasket

Parts Used:

Dishwasher Door Gasket - Gray

Rod from Dripping Springs, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken Part

I just installed the new part. There were no tools required. I bought an extra part
I ordered the part on Monday, and it arrivefor the other side in case it breaks.
d by FedEx the next day. I live in Southern California.

Great service, thanks.

Parts Used:

Upper Track End Cap

Gary from Palm Springs, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

leaking around door

1-2-3 EASIEST JOB I EVER HAD to DO AND THE WIFE IS PROUD OF ME FINALLY.

THANKS , , ,Bat from WEST SENECA (Buffalo, NY)

Parts Used:

Dishwasher Door Gasket - Gray

john a from west seneca, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

We needed a new bottom dishrack the old one was very rusty

I ordered a new rack, snapped the stuff together, and slid the old one out and the new one in. Fit beautifully. Piece of cake and much cheaper than a new dishwasher.

Parts Used:

Lower Dishrack Kit

Katherine from Coos Bay, OR
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

1 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

water was leaking ou the door

pulled the old door seal off and pushed the new seal into place and it works great!
THANK YOU!

Parts Used:

Dishwasher Door Gasket - Gray

ROSE from ELVERSON, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

water leaked through door gasket.

Lowered door and put a weight on it to keep it open. with screwdriver pried out the old gasket. It was simple. looked at the end of the replacement gasket and inserted it into the track with the small hole down. Job Complete. about three minutes total time.

Parts Used:

Dishwasher Door Gasket - Gray

Charles F. from Burnet, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Water Seeping From Under/Around The Door

I opened the door and pulled the gasket from around the dishwasher. The gasket does not have any adhesive around it, so it pulled free almost immediately. The new gasket was pressed into place around the door and I was done. It couldn't have been any easier. I suspected it was the gasket when I saw pinched portions that did not return to the original shape and there were no visible cracks in the machine.

Parts Used:

Dishwasher Door Gasket - Gray

Nate from Fort Worth, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

leak in dishwasher

This was an easy fix. My husband took out the old gasket and put the new one in. It fit perfectly and no more leak. The part got to us really quickly too and that was nice. No more hand washing the dishes! :)

Parts Used:

Dishwasher Door Gasket - Gray

Carolyn from Keithville, LA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Latch had broken on detergent dispenser cover

Remove retainer that holds door color slide in front of door & then remove the slide. Remove cardboard backing, remove electric latch release, remove latch & replace with new one. Open door & slide out the cup dispenser cover pin & spring & replace with new ones. This was all straight-forward & simple.

Parts Used: