WRT771REYM00 Whirlpool Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Ice maker would not make any ice
All of the parts are removed and install through the front of the freezer bin. Remove three screws and unplug the old one. I plugged the old wiring directly in and set the new ice maker on two of the screws for alignment, then screwed in the third screw, tightened everything. Install the arm that checks the status of the amount of ice and waited for it to fill up with ice.
Parts Used:
-
Betty from Maricopa, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
water filter missing
-
stefania from miami beach, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Water overflow from ice maker turns ice in tray into block
Symptom: The ice maker was making ice, but sometimes the water would run and overflow at the entrance of the ice maker, spilling water into the ice catch and turning all of the ice into a huge block. The problem was that the liner of the ice maker had started to flake off, but only on part of the unit. When water would flow into the ice maker, the exposed part would freeze quickly, creating an ice dam and block the rest of the water from flowing into the other trays, thus overflowing. Solution: A new ice maker unit was ordered online, then after watching the video on how to fix, the process was straightforward and fairly simple. There is one screw to remove, 2 to loosen, and a wire harness to remove to remove the ice making unit. Then the ice full bar was removed from the old unit and put onto the new unit and the entire assembly replaced inside the freezer. The most difficult part of the job was loosening the screws by touch as there isn't a lot of room to see.
Parts Used:
-
Patrick from Las Vegas, NV
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Wrench set
Was this instruction helpful to you?
Thank you for voting!
Ice maker began making large block of ice, although still made cubes, bur required emptying weekly.
Unplugged, turned off water. Simply took out bottom screw, then two top screws. Disconnected writing harness. Put in the new reversing order. Then like new again!
Parts Used:
-
John from Carrollton, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Coating of Mold deterioated and mold leaked into ice tray
-
Dwight from Bossier City, LA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Malfunctioning Icemenaker - No Ice
Remove entire ice maker unit from freezer to test for function. Determined to be an electrical malfunction issue. Installed replacement ice maker unit. Easy fix, perfect fit replacement unit.
Parts Used:
-
Joseph from Davie, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
ice tray leaked forming blocks of ice in the ice tray
It was so simnple that I let my wife do the repair. All she had to do was to turn of the water supply and unplug the refrig. loosen two screws on top and remove one screw on the bottom of the ice maker. Gentle tilt the unit in order to unplug the electric connection on the rear of the unit and then take it out. The new unit went back the same way in reverse order.
Parts Used:
-
Fred from Taylor Lake Village, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Water Filter
Replacing the water filter was no big deal. What impressed me was ordering the filter on Friday and having it at my door on Saturday the next day! That is quality service and I felt you deserve a thumbs up on your customer service skills.
Parts Used:
-
Robert from The Villages, FL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
ice maker would not make ice.The fill tube had seperated and iced up so no water could get to ice maker
Just followed the video that you guys had on line . It was a very easy repair
Parts Used:
-
Thomas from newark, DE
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
icemaker quit working
Definitely watch the demo video. It described every aspect to remove old unit and install the new one. Made the install 'childs-play'!!
Parts Used:
-
Dan from Menard, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
No ice made by ice maker
imakers first replaced the water inlet valve. that didn't fix the problem, but increased the water column to the water dispenser. replacing the icemker cured the problem! I now have $200 ice!!! your service was great! the part arrived as promised!
Parts Used:
-
John from belfair, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Water leaking from ice maker .
-
Douglas from Santa Ana, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!