WRT771REYM00 Whirlpool Refrigerator - Instructions

Easy.... Video made replacment very smooth. I only needed one tool a nuy driver.

This is an easy fix, simply remove and replace. What I was impressed with is that a how to video was provided along with my part. I wish all manufactures would offer this, the video was easy to understand and you had a good view of the operation. Thanks, a job well done.

The repair was easy. I wish I would have had a nutdriver; that would have made it extremely easy and a lot faster. I used a small wrench to take out the old ice maker. The new one went in easy. The arm was easy to move from the old ice maker to the new one, but it was a bit snug. We had to manually push the arm down a few times for the icemaker to dump the ice. After about 5 batches or so, it began to work on its own and now we have a full tub of ice (for the first time in two years). This was certainly time and money well-spent. Any one can do it!

replaced whole untit very simple proceder three sheet metel screws hold unit on unplug electric conncetor and its done

Pulled old unit out, took control lever off and put on new unti and installed. My connections all fit so no need to change. Had ice dropping in about an hour.

Had to Test Seloind. It Was OK. Then tested Motor Motor For Ice Maker. It Was Bad. Went Online Looked Up Parts For My Unit. They Were Shipped in a Timely Manner, only a few days. Installed parts in less than 15 minutes. Went very easy. Thank You

Watched your AMAZNG detailed Video first. Ordered part received in two days,WOW! Pulled refrig. from wall unscrewed two screws, loosened third screw on hose, pulled hose out cut below metal incert. Took new part from package placed in back of refrig. placed new metal incert in hose replaced hose in new fitting. Turned water back on, plugged in refrig. No leaks pushed back to wall waited for while...VOILA!! ice cubes no mess to report. THANKS FOR SUCH AN AMAZING WEB SITE and SERVICE. TOM

Just like the video. Hardest part was finding the right tool to unscrew the 3 screws which were easy. The rest was a piece of cake. I didn't replace the wire because I wasn't sure how to disconnect it from the fridge. The wire connections didn't look the same at the fridge wall as in the video.

Plan simple just screwed the screws out take the ice make out put the new one in and wait till the timer was ready and water went in and ice was made like brand new.

first remove ice maker 1-screw on the bottom all the way out and two screws on the top half way out slide up and out and unplug wiring as you remove then remove back panel unplug ground wire remove screws that hold fan assembly unplug wiring remove pressed on fan blade put new motor in reasemble and it was good to go

Your online video made our icemaker replacement a breeze -- saved a bunch of money! Thank you PartSelect!

I recieved the part from part select right away. While I was ordering I noticed a video I could watch on how to make the ice maker replacement part work. I was very pleased and the repair was a snap. Thanks alot for the help and the prompt service.

followed instructions provided. real easy. also installed new filter. forgot to flush the filter.

It was not the icemaker, instead it was the water inlet valve. I had ice in one hour. The biggest problem was getting the refrigerator from against the wall.

Loosen two top screws and removed one bottom screw and unplugged the old ice maker. Installed old arm on the new ice maker and plugged in new ice maker to the existing plugs and reinstalled new ice maker. Dumped ice in about one and a half hours. Full bin within 72 hours. Super easy.