All Installation Instructions for Crosley Refrigerator WRS26MF5ASI

Bin broke

Snapped into place- no tools

Parts Used:

Refrigerator Door Bin

Alisa from Birmingham, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Ice container and auger assembly broke apart

Removed the old container, opened the replacement, put it in and it worked perfectly. Great job! Arrived quickly, well packed and in perfect shape.

Parts Used:

Ice Container and Auger Assembly

Sandra from Tulsa, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Ice door flapper broke in half

I followed a video I found on how to take the front off of the ice dispenser ( to me the hardest part) Once I was in there it was a matter of removing the pin and spring,then putting the new flapper in place of the old. Hardest part in reassembling was getting the spring back where it belongs. After that it was a matter of putting the ice dispenser back together and testing. Works perfectly.

Parts Used:

Ice Chute Door

James from Atlantic, VA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

The ice crusher housing is made of plastic and a piece of it broke off,

Remove 4 screws to get the housing cover off. Remove the lock ring that holds the ice auger in place. REmove 4 screws to get the crusher housing off. Reverse the order to replace the housing. Very simple.

Parts Used:

Dispenser Crusher Housing

JAMES from COOSADA, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

hook broke

just installed new shelf

Parts Used:

Door Shelf

Larry from Lincoln, NE
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Broken shelf in the door

Replaced them

Parts Used:

Refrigerator Door Bin

Eugene from Holland, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Missing parts

All the bins snapped right in. Bolts for hinge fit and went right in. Kick plate snapped right in easy. Every thing easy to do. Will use these people again if we need to. Great parts and no problems.

Parts Used:

Hexagonal Screw

Kickplate Grille

Pan Head Screw

Upper Hinge Cover

Cynthia from Castroville, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

Was this instruction helpful to you?

Thank you for voting!

Water dripped from water dispenser after use

Pulled fridge away from wall and unplugged. Turned off main water supply feed and removed fitting from water inlet valve. Took off back panel by removing 3 screws. Took out 2 screws holding valve to fridge. Pulled off color coded wire clips. Unscrewed each water tube connector. New valve had quick connectors so had to snip off flared ends of tubing with utility knife. Pushed tubing firmly into new valve fittings and pulled to ensure connection. Reattached wiring and reattached valve to fridge with the 2 screws. Reconnected water feed line and turned on main water feed. Checked for leaks before replacing back panel. Done. No more dripping from water dispenser.

Parts Used:

Refrigerator Water Inlet Valve

Jeffrey from Greenfield, MA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)

Was this instruction helpful to you?

Thank you for voting!

Three of the four drawer supports were broken

It went okay. My husband did the job and he is handy. We both watched the little "How to" video and that was very helpful.

Parts Used:

Crisper Support - Rear

Linda from Turtle Creek, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

2 drawer shelves broken

Snap off and snap on! Totally amazed, purchased on line at 8pm and they came the "next" day around 1 pm and shipping was only 7 bucks part select is awesome!!!

Parts Used:

Door Bin

Refrigerator Door Bin

David from Midlothian, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

face plate broken nd ribbon disconnected

Installed the ribbon on the face plate first and then to the main part of the door. This prevented the wires within the ribbon not to be broken. then put the cover on and screwed it in.

Parts Used:

Ribbon Cable Harness

Dispenser Cover

Patricia M from Lakewood, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Ice maker quit working.

The two screws that held the ice maker in place could not be seen do to there location. I could only get one hand inside do to space restriction.So I placed a mirror inside so I could see the screw heads and from point it was very easy to see and line up the nut driver on the screw heads. I then lifted it up and unplugged the wiring and installed the new ice maker. Works like a charm. Paul

Parts Used:

Refrigerator Ice Maker Assembly

Paul from Akron, OH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

leaking water onto the evap fan freezing causing alot of noise

1st a changed the defrost stat. Waist of time. Realized there was no evaporator above fan. Noticed ice was builing up behind ice maker near fill tube. Found if I shut off ice maker ice wasnt building up on fan. Moved fridge out unplugged fridge unscrewed plastic nut. Turned 90 degrees. Replaced tube locked in place . Screwed nut back on . Plugged in and turned ice maker on. Wife happy ice was back on and no noise.

Parts Used: