All Installation Instructions for Tappan Range TEF326FSD

The drawer on the bottom of the stove would not close properly. When I opened it, it would fall on the floor.None of the parts stores around here knew what I was talking about and couldn't supply any parts.

I searched the internet for help, that lead me to your site. I typed in the make and model. Within seconds some drawings appeared, showing the part I needed. I watched your video on making the repair. You make it so easy. I ordered the parts you recommended. They arrived in just a couple of days. I went back to your site to take another look at your video and I was ready. In just minutes, I had the drawer out, installed the new guides. The one side, the guide was completely gone, so I could snap in the new2 guide as you recommended. The other side, the guide was broken off and I had to use a needle nose pliers to get it out. Then snaped in the new guide. Re-installed the drawer with all the goodies, wax paper, tin-foil, baggies etc. Closaed t6he drawer and everything lined up perfectly. Thanks to you I've got a drawer that works again aqnd I got it done before my husband got home from work. Funny thing, he hasn't complained or asked me about the drawer. I guess that will be our little secret....Thanks Julie

Parts Used:

Rear Drawer Glide

Jewell from Port Charlotte, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

range top left big burner would not come on.

I disconnected the power cord,took the top back plate off,the switch knob on the switch I was to change,the two screws holding it.pull the old switch out,place the new one in the holder,replaced the two screws that holds the switch and took the wires off the old switch one at a time and placed them on the new one in order on new switch.replaced the back cover and plugged power cord back in.turned range on,it was good. r taite,

Parts Used:

Infinite Burner Switch

ruben from moss point, MS
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set

Was this instruction helpful to you?

Thank you for voting!

Baking Element burnt into

unscrewed two screws, exposed wire connections. Disconnected two wires, then placed new element in oven and reconnected two wires, then pushed connectors back inside stove body. A acordless screwdriver made quick work of the two screws and the element works fine. Thank you for your quick delivery.

Parts Used:

Oven Bake Element

David from Dover, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Range drawer wouldn't close properly

Removed the drawer, simply snapped the rear drawer glide in the punch-out by hand, replaced the drawer. Works well

Parts Used:

Rear Drawer Glide

Kenneth from Vancouver, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Surface Element burnt out

Lift stove top cover up and support cover so it will not fall down unplug element put new one in close cover and turn burning on and watch the burner get red hot. simple job why call a repair man in. Vicki

Parts Used:

Surface Element - 8 Inch - 220V

Vicki from Strong, ME
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Element in oven burned up

Watched the online video and followed the instructions. I unplugged the oven, used the nut driver to loosen the screws, removed the old element, hooked up the new element and voila... back in business. I received the part the next day after ordering it!

Parts Used:

Oven Bake Element

Diane from Verona, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

rear drawer glide broke

The repair was as simple as reattaching the broken glider. No tools were needed.

Parts Used:

Rear Drawer Glide

Barbara from Concord, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Mounting ears on timer broken

WE watched the installation videos first. Very helpful. Removed rear hood cover, jotted down wiring connections, ensured that the brackets were secure ( one was not ), applied overlay,attached wires and tightened 4 screws( not supplied ). On-line photo was upside down but was the correct part. Delivery was prompt.

Parts Used:

Electronic Clock Assembly

OVERLAY

Carole from Heber Springs, AR
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

replaced the infinite burner switch

I watched you vedio and done just as the vedio told me how to change the switch. When I got the switch on pluged it in turned it on and every thing work great. thank you very much.

Parts Used:

Infinite Burner Switch

Alvie from Pasco, WA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Wrench (Adjustable)

Was this instruction helpful to you?

Thank you for voting!

Bake element caught on fire, then wouldn't work.

Turned off electric to range, removed old element, replaced it with the new one, then turned electric back on. Super easy.

Parts Used:

Oven Bake Element

Greta from Ridgway, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

Was this instruction helpful to you?

Thank you for voting!

Couldn't find drip pans that fit

I went to all of the do-it yourself stores and spent a bunch of money on aftermarket drip pans only to find out that none of them fit. I came up on your website and also called customer service. The found the right part and mailed it too me. They fit perfectly. No more burnt and rusty drip pans. I know where to go for parts now.

Parts Used:

Chrome Drip Bowl - 6"

Drip Bowl - 8"

Heather from Springfield, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Replace ill-fitting drip pans

After two failed attempts to get the 'correct' drip pans for my range from two other supply outlets, Part Select had the proper drip pans for this model. They fit perfectly! Simple installation and threw away those cheap, poorly fitting replacement pans I've put up with for three years! Thanks Part Select for having the correct parts!!

Parts Used:

Chrome Drip Bowl - 6"

Drip Bowl - 8"

thomas from cleves, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Element didn't heat

First the item we ordered arrived in 1 day, we were totally amazed!! My husband switch out the heating element and it worked!!!! Thank you for great service!!!!

Parts Used:

Oven Bake Element

Lisa and Marc from Fredericksburg, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Front drawer gluide broke

Ordered part which arrived in 2 days, yeah!! Installation was really simple, took less than a minute. The online instructions/ video were very helpful! Excellent site to order parts!

Parts Used: