TEF326FSC Tappan Range - Instructions

The repair shop wanted 150 dollars to fix it. I ordered the glass and replaced it myself. It was really easy and all I need was a screwdriver. It took me about 30 minutes total.

It went okay but I had to have some help putting it back together. One person held the glass while the other person tightened the screws.

Pulled out the stove and unplugged it. Removed the old element after removing the 2 small bolts. First road block I saw wires - I was told the element just pulled out and I would insert the new one. As I am not an electrician I had trepidations and called immediately back to Parts Select. We confirmed I had the right part and the gal explained about the wires and how they connected. From there a piece of cake! Reconnected the wires to the new element (snapped on, reconnected the element with the bolts and I was finished. Thank you Parts Select! The online instructions were great.

I attached the drawer glide clips to the stove and inserted the drawer, done in minutes. The video on your site actually made it very easy made it so there was no guessing.

Noticed that excisting element was bent at a 90 deg. to prevent it from contactiog the rear stove cover and shorting out whrn power is restored, This was NOT mentoned nore addressed in there manual. A barrel splice was to reestablish contact, element is ni-chrome wire and can not be soldered

Turned off circuit breaker to the oven. Tested oven for electricity. Used nut driver to remove screws holding element. Carefully pulled forward the element and wires a few inches and removed the element from the wires using pliers to hold prongs attached to the wires--do not yank! Pushed new burner element prongs into wire prongs for snug fit. Gently pushed wires back into oven wall. Secured with bolts. Tested oven. Worked beautifully!

Unplugged the stove. Removed the 2 screws that hold it in place. Pulled the element out enough to unplug the wires on each side. Plugged the wires back on the new element, pushed it back into place and put the screws back in. Turned on the oven and it worked fine.

I pul;led out the drawer and inserted the front glide in about 2 seconds and slid the drawer back in! Presto--fixed!

Popped out the old ones with a screw driver. Pushed in the new ones. Whole process took less than three minutes, super easy.

So easy! The drawer glides just popped right in!

We received our baking element within 2 days of our order. After watching the video on line, my 27-year-old son got out his phillips head screw driver and took out the old burner and replaced the new burner and tested it within 30minutes. It worked just fine. Thanks for a great installation experience.Mary

We removed the old element,which had actually burned in two, and installed the new one. I was extremely impressed with the ease of ordering from this site and very surprised at how fast it was shipped to us. This will be my go-to place for any other parts I might need.

real easy with no problems, thank you

The repair was easy. I watched the video from your website. It took me less than 15 minutes to replace the part. I really appreciate how fast the part arrived to my house. My oven is working great.

this bake element has two special Hex style screws, securing it in place, but a nut driver worked just as well. remove the baking racks, and then loosen the two hex screws. slowly pull the element out of the back wall and then disconnect the electric leads. reinstall by doing then the opposite action. could not have be simpler.