All Installation Instructions for Westinghouse Washer Dryer Combo SWSG1031HQ4

No reheat

Pried the lid up and flipped it back then disconnected the front panel wiring harness and then popped the front panel loose at the top and dropped it down. Disconnected the ignition coils, removed the coil retainer bracket and replaced the coils. Reassembled it in reverse order, performed functional test. Success!

Parts Used:

M Series Ignition Coil Kit

PETER from Fremont, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

brown stains on clothes

-remove screws on top of dryer -check for clips on side -remove panel under control panel -remove screws (6) I think, holding control panel -disconnect door switch connector -remove 2 more screws holding front -you may have to lift the tub to allow the vent tube to clear for front removal - - Proceed with felt seal portion of repair - - - -GOOD LUCK You may need help.

Parts Used:

Lower Front Felt Seal with Adhesive

Front Upper Felt Seal with Adhesive

James from Hiawassee, GA
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

hose leaking

lifed the lid .remove oud hose and replaced with new hose

Parts Used:

Water Inlet Hose Assembly

Daniel from Daingerfield, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Filter Was Mangled

Took the old one out, put the new one in! (:>}

Parts Used:

Dryer Lint Screen

Richard from Portsmouth, NH
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours

Was this instruction helpful to you?

Thank you for voting!

lint basket was destrpyed

Really ,no repair;just put new lint basket in dryer;took seconds.

Parts Used:

Dryer Lint Screen

Gerry from Asheville, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Wouldn't drain completely and wouldn't final spin

before you buy any parts do this first..turn on your washing machine,then push and hold start and pause at the same time.An error code will come up,look in your book and see what that code represents. Mine came up 47.that error for my machine was the door switch.

Parts Used:

Drain Pump - 120V 60 Hz.

frank from fostoria, OH
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Dryer was making a squealing noise

The repair video from PartSelect.com was excellent in describing how to fix the dryer. All of the parts were included in the replacement kit, including the screws and ball bearing. I was very impressed with the quality of the kit and the video. A $25 kit probably saved me hundreds in repair cost and saved me from having to buy another dryer. Here's to another 14 years of use!

Parts Used:

Rear Drum Bearing Kit

Trever from Vancouver, WA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Loud Racket couming from the bearing casing

Ordered the part from PartSelect.com. It came in a couple of days, which was nice. My wife was all over me to fix the dryer, or buy a new one. Needless to say, I didn't think the old one was done. The bearing assembly had an instructional video. This provided easy to follow instructions, and simple advice even I could follow. Everything went well, and the dryer is now quietly running as good as new. Awesome website, and the customer service is excellant too. WE use PartSelect.com at work all the time. Im a property manager, and the parts and advice save us thousands every year. Thanks guys!

Parts Used:

Rear Drum Bearing Kit