RM288PXV5 Whirlpool Microwave Oven Combo - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven knob was cracked and breaking.
I was able to locate the exact part needed to make my older oven work like new again. Thanks for the great online source for hard to find parts. All I had to do was remove the old one and replace it with th new one. It fit perfectly.
Parts Used:
-
Carolyn B from Tishomingo, MS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Burnt out baking element
Just changed out the old and the new. That's all that was needed.
Parts Used:
-
robert from littleton, CO
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
burned out baking element
First unplugged oven from wall. Removed two screws from back of oven above element. Pulled element out from oven back with wires attached. Gently detached clips from element. Replaced old element with new one and inserted wire clips onto end of element. Replaced element into back of oven and replaced screws. Yea, I did something!
Parts Used:
-
John from Blairsville, GA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Heating element went out
Removed two screws on old element. Pulled element out to detach socket wires. With new element attached socket wires, pushed element all the way in and tightened screws.
Parts Used:
-
Jennifer from Arlington, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
I have a double oven. The bottom heat element of the bottom oven was corroded.
Unscrewed the 2 screws attaching heating element to oven, then I disconnected the element from power source by pulling. Then I installed new element.
Parts Used:
-
Vincent from Boca Raton, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!