REX3514RQ1 Roper Dryer - Instructions

Went to your web site and found 40% of the time the thermal fuse is the problem. By using your site found how to locate fuse & test it. It took me 10 min to take out the old part & tested it to find it bad. I ordered the part which cost $10 & got it in 3 days. It took me 10 min to install it and the dryer is fine. This save me a big repair bill.

open machine up and replaced the new belt.

the heating element went on my dryer. but partselect.com had the perfect part and at a gr8t cost it saved tons of money and they are a top-notch company and if I need anything else will look at for replacement parts from this company. gr8t price, speedy delivery, best company I have found on-line..thanks for your help.. do yourself a favor and look to his company before you make a costly repair because they are the best..

just removed old fuse and installed new one ..... cleaned all the vents out to

It is a washer/dryer combo. First I unplugged the unit. I had to remove the top and front of the dryer, remove the belt and remove the drum. I then removed the side panel that the motor was on. That was a little tricky getting at a couple of the screws. I then took the flywheel off which was somewhat difficult. It screws off in the opposite direction and was hard to get loose. I unplugged the motor, no wires to connect. There is a clip on the front and back of the motor holding it in place. Take them off and the motor comes right out. Replace the new motor and screw the flywheel back on. Install the clips, plug the motor in and put everything back as you took it apart.

The repair was really simple and easy. This is because of the customer support I got from the company. Everything on the Video-Tutorial on how to install the part/s is a kind of valuable help to anybody who will try to be a do-it-yourself passion.Thank you guys.

just took off the front panel took off the belt and replaced it with the new one we watched the video pretty easy

it was easy all the parts were the exact replacement

Diagnosed the problem on parts select, ordered the part and watched the youtube video on how to install and done! Super easy - thanks for boosting my "chicks can fix anything" mojo and saving me a bunch of $$.

Saw no heat, web said probably the fuse. Replaced the fuse. Nope. Second guess was the thermostat at the exhaust. Replaced that. Nope. Finally got to actively troubleshooting and isolated one of the thermostats near the heating element. Replaced that and everything is fine. So now I have a good spare fuse and thermostat for the next repair. There was one tool I wished I had, a socket small enough to open the back. I had to use pliers and that was a pain. Other than that the repair was almost trivial, just unplug the bad one and plug in the good one.

Took the back off the dryer. Disconnected the old thermostat and installed the new thermostat. Connected the back of dryer. Put in a load of clothes to dry and the clothes were dry on the first try. Works like a new dryer. Saved a lot of money not having to buy a new dryer when all I had to do was replace some old parts.

Took the back off of the dryer; took off screws holding the heating element in place; disconnected the wiring (which is very self explanatory-just use color coding) and removed old heating element. Then replaced with new element by connecting the wiring; put screws back in that holds the element in place then put back dryer cover on.

Removed back panel of the dryer and located the thermal fuse. Disconnected two wires, and removed one screw holding the fuse in place. Installed new fuse and reassembled. Dryer works like a champ again.

I called the 1-888-895-1535 number and got expert advice to diagnose my drier. The part arrived and was very simple to install. Drier works like a champ! The online video was great! Thanks!

removed front panel and drum and replaced drum support rollers